Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Quantum Science and Technology

Implementation of continuous-variable quantum key distribution with discrete modulation

Takuya Hirano, Tsubasa Ichikawa, Takuto Matsubara, Motoharu Ono, Yusuke Oguri, Ryo Namiki, Kenta Kasai, Ryutaroh Matsumoto, Toyohiro Tsurumaru

Published Jun 1, 2017• 72 citations
Publisher

Abstract

We have developed a continuous-variable quantum key distribution (CV-QKD) system that employs discrete quadrature-amplitude modulation and homodyne detection of coherent states of light. We experimentally demonstrated automated secure key generation with a rate of 50 kbps when a quantum channel is a 10 km optical fibre. The CV-QKD system utilises a four-state and post-selection protocol and generates a secure key against the entangling cloner attack. We used a pulsed light source of 1550 nm wavelength with a repetition rate of 10 MHz. A commercially available balanced receiver is used to realise shot-noise-limited pulsed homodyne detection. We used a non-binary LDPC code for error correction (reverse reconciliation) and the Toeplitz matrix multiplication for privacy amplification. A graphical processing unit card is used to accelerate the software-based post-processing.

DOI
10.1088/2058-9565/aa7230

Related papers

Continuous operation of four-state continuous-variable quantum key distribution system

Takuto Matsubara, Motoharu Ono, Yusuke Oguri +5 more

We report on the development of continuous-variable quantum key distribution (CV-QKD) system that are based on discrete quadrature amplitude modulation (QAM) and homodyne detection of coherent states of light. We use a pulsed light source whose wavelength is 1550 nm and repetition rate is 10 MHz. The CV-QKD system can continuously generate secret key which is secure against entangling cloner attack. Key generation rate is 50 kbps when the quantum channel is a 10 km optical fiber. The CV-QKD system we have developed utilizes the four-state and post-selection protocol [T. Hirano, et al., Phys. Rev. A 68, 042331 (2003).]; Alice randomly sends one of four states {|±α⟩,|±𝑖α⟩}, and Bob randomly performs x- or p- measurement by homodyne detection. A commercially available balanced receiver is used to realize shot-noise-limited pulsed homodyne detection. GPU cards are used to accelerate the software-based post-processing. We use a non-binary LDPC code for error correction (reverse reconciliation) and the Toeplitz matrix multiplication for privacy amplification.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Oct 24, 2016•2 citations

Experimental demonstration of continuous-variable quantum key distribution over 80 km of standard telecom fiber

Paul Jouguet, Sébastien Kunz-Jacques, Anthony Leverrier +2 more

Summary form only given. Continuous-variable quantum key distribution (CVQKD) is a promising alternative to commonly used discrete-variable QKD protocols, because this technology can be implemented with standard telecom components and recent results suggest that it will be compatible with standard wavelength division multiplexed telecommunication networks [1]. Security proofs against general eavesdropping attacks are available for CVQKD protocols using Gaussian modulation [2], and field implementations over deployed telecommunication networks have been demonstrated over the past few years [3].Long-distance operation of CVQKD systems, however, has been hindered until now by the limited efficiency of the complex error-correction (or reconciliation) algorithms that are required to extract the secret key from the correlated data shared by Alice and Bob. We have designed high-efficiency error correcting-codes [4] allowing to extract an errorless secret key in a CVQKD protocol using a Gaussian modulation of coherent states and a homodyne detection system. These codes are available for a wide range of signal-to-noise ratios on a Gaussian noise channel with a binary modulation and can be combined with a multidimensional reconciliation method [5]. This improved reconciliation procedure considerably extends the secure range of a continuous-variable quantum key distribution with Gaussian modulation.

Conference on Lasers and Electro-Optics Europe & European Quantum Electronics Conference (CLEO/Europe-EQEC)•May 1, 2013•10 citations

Four-state discrete modulation continuous variable quantum key distribution based on hardware synchronization

Yunjie Zhang, Xuyang Wang, Yu Zhang +6 more

In the case of continuous-variable quantum key distribution (CV-QKD) systems, synchronization is a key technology that ensures that both the transmitter and receiver obtain corresponding data synchronously. By designing an ingenious time sequence for the transmitter and receiver and using the peaking value acquisition technique and time domain heterodyne detection, we experimentally realize a four-state discrete modulation CV-QKD with a repetition rate of 10 MHz, transmitting over a distance of 25 km. With well-designed time sequence of hardware, Alice and Bob can obtain corresponding data automatically without using numerous software calculation methods. The secure key rates are calculated by using the method proposed by the Lütkenhaus group at the University of Waterloo in Canada. In the calculation, we first estimate the first and the second moment by using the measured quadratures of displaced thermal states, followed by calculating the secret key rate by using the convex optimization method through the reconstruction of the moments. There is no need to assume a linear quantum transmission channel to estimate the excess noise. Finally, secure key rates of 0.0022—0.0091 bit/pulse are achieved, and the excess noise is between 0.016 and 0.103. In this study, first, we introduce the prepare-and-measure scheme and the entanglement-based scheme of the four-state discrete modulation protocol. The Wigner images of the four coherent states on Alice’s side, and four displaced thermal states on Bob’s side are presented. Second, the design of hardware synchronization time series is introduced comprehensively. Third, the CV-QKD experiment setup is introduced and the time sequence is verified. Finally, the calculation method of secure key rate using the first and the second moment of quadrature is explained in detail. The phase space distribution of quadratures is also presented. The secret key rate ranges between 0.0022 and 0.0091 bits/pulse, and the equivalent excess noise are between 0.016 and 0.103. The average secret key bit rate is 24 kbit/s. During the experiment, the first and the second moment of the quantum state at the receiver end are found to fluctuate owing to the finite-size effect. This effect reduces the value of the secure key rate and limits the transmission distance of the CV-QKD system. In conclusion, four-state discrete modulation CV-QKD based on hardware synchronization is designed and demonstrated. The proposed hardware synchronization method can effectively reduce the cost, size, and power consumption. In the future, the finite-size effect will be investigated theoretically and experimentally to improve the performance of system.

Acta Physica Sinica•Jan 1, 2024•0 citations

Composable free-space continuous-variable quantum key distribution using discrete modulation

Kevin Jaksch, Thomas Dirmeier, Yannick Weiser +16 more

Continuous-variable (CV) quantum key distribution (QKD) allows for quantum secure communication with the benefit of being close to classical coherent communication. In recent years, CV QKD protocols using a discrete number of displaced coherent states have been studied intensively as the modulation can be directly implemented with real devices with finite resolution. Until now, experiments only calculated key rates in the asymptotic regime. Here, we present a CV QKD system using discrete modulation that is especially designed for atmospheric channels. We use polarization encoding to exploit the nonbirefringent nature of the turbulent atmosphere. This allows to expand CV QKD networks beyond the existing fiber backbone. In a laboratory demonstration with a static 3-decibel loss channel, we implemented a recently developed security proof allowing to calculate composable finite-size key rates against independently and identically distributed collective attacks. We applied the full QKD protocol including a quantum random number generator, error correction, and privacy amplification to extract secret keys.

arXiv:2410.12915•Science Advances•Jun 12, 2026•13 citations

Digital synchronization for continuous-variable quantum key distribution

Hou-Man Chin, Nitin Jain, Ulrik L. Andersen +2 more

Abstract Continuous variable quantum key distribution (CV-QKD) is a promising emerging technology for the distribution of secure keys for symmetric encryption. It can be readily implemented using commercial off-the-shelf optical telecommunications components. A key requirement of the CV-QKD receiver is the ability to measure the quantum states at the correct time instance and rate using the correct orthogonal observables, referred to as synchronization. We propose a digital synchronization procedure for a modern CV-QKD system with locally generated local oscillator for coherent reception. Our proposed method is modulation format independent allowing it to be used in a variety of CV-QKD systems. We experimentally investigate its performance with a Gaussian modulated CV-QKD system operating over a 10–20 km span of standard single mode fibre. Since the procedure does not require hardware modifications it paves the way for cost-effective QKD solutions that can adapt rapidly to changing environmental conditions.

arXiv:2203.08486•Quantum Science and Technology•Jun 23, 2022•25 citations

Methods for Secure Communication with Continuous Quantum Variables

Adam Alderton

Quantum information processing uses the laws of quantum physics to perform tasks that are infeasible or impossible classically. Within this broader programme, quantum communication has emerged as one of the most practically mature sub-fields of quantum information science, with several proposed protocols having already been demonstrated over deployed optical fibre and free-space links. Of the various platforms available for encoding quantum information for communication, the continuous-variable (CV) framework encodes information in the quadratures of the electromagnetic field and is therefore directly compatible with the existing machinery of classical coherent optical communications. The most prominent CV protocol is continuous-variable quantum key distribution (CV-QKD), which establishes an information-theoretically secure cryptographic key between two spatially separated parties. Because CV-QKD reuses much of the hardware of classical coherent telecommunications, including off-the-shelf lasers, modulators, and balanced detectors, it is a leading candidate for the deployment of quantum-secured communication over standard optical fibre networks. The development of CV-QKD has typically proceeded with the underlying physics dictating the engineering. Security proofs, often relying on the Gaussian optimality of collective attacks, set the structure of the protocol, and the practical system is then built to satisfy the assumptions on which those proofs depend. Contributions of this thesis adopt the opposite view, taking the practical engineering of high-rate CV-QKD systems as the starting point and developing the theoretical machinery required to support it. The first contribution is the formalisation of one-round sliced reconciliation with guard-band post-selection as a key distillation scheme designed for real-time, high-throughput operation. Originally introduced experimentally as a means to stabilise bit error rates and enable the use of fixed-rate error correction codes at high symbol rates, guard-band post-selection is shown here to identify the guard-band span as a free parameter that can be tuned to hold the quantum bit error rate approximately constant across a range of channel conditions. However, conditioning on accepted data produces non-Gaussian post-selected statistics that lie outside the reach of standard Gaussian-optimality security arguments, which motivates the remaining two contributions. The second contribution is an asymptotic security analysis of guard-band post-selected CV-QKD against arbitrary collective attacks, no longer restricted to Gaussian adversaries. By using a quantum channel estimate as side information and by lifting reduced-state distances to purification distances via entropic continuity bounds, security is certified against the class of channels lying close to a Gaussian thermal-loss reference, with a key-rate penalty that scales with the energy-constrained diamond distance to that reference. The third contribution is the experimental basis required to apply this framework in practice. A lightweight three-stage protocol for quantum channel estimation is proposed and demonstrated, which repurposes the Gaussian probe constellation already present in the CV-QKD signal and requires no additional hardware or modifications to the underlying protocol. Over single-mode optical fibre at distances from 10 km to 50 km, the protocol produces physically valid process tensor estimates whose energy-constrained diamond distances to a Gaussian reference channel remain on the order of 10^(-3) throughout. Together, these three contributions provide a treatment of post-selected Gaussian-modulated CV-QKD in which the engineering, the security theory, and the channel characterisation are designed to operate together within a deployable system.

•May 28, 2026•0 citations
We have developed a continuous-variable quantum key distribution (CV-QKD) system that employs discrete quadrature-amplitude modulation and homodyne detection of coherent states of light. We experimentally demonstrated automated secure key generation with a rate of 50 kbps when a quantum channel is a 10 km optical fibre. The CV-QKD system utilises a four-state and post-selection protocol and generates a secure key against the entangling cloner attack. We used a pulsed light source of 1550 nm wavelength with a repetition rate of 10 MHz. A commercially available balanced receiver is used to realise shot-noise-limited pulsed homodyne detection. We used a non-binary LDPC code for error correction (reverse reconciliation) and the Toeplitz matrix multiplication for privacy amplification. A graphical processing unit card is used to accelerate the software-based post-processing.
We report on the development of continuous-variable quantum key distribution (CV-QKD) system that are based on discrete quadrature amplitude modulation (QAM) and homodyne detection of coherent states of light. We use a pulsed light source whose wavelength is 1550 nm and repetition rate is 10 MHz. The CV-QKD system can continuously generate secret key which is secure against entangling cloner attack. Key generation rate is 50 kbps when the quantum channel is a 10 km optical fiber. The CV-QKD system we have developed utilizes the four-state and post-selection protocol [T. Hirano, et al., Phys. Rev. A 68, 042331 (2003).]; Alice randomly sends one of four states {|±α⟩,|±𝑖α⟩}, and Bob randomly performs x- or p- measurement by homodyne detection. A commercially available balanced receiver is used to realize shot-noise-limited pulsed homodyne detection. GPU cards are used to accelerate the software-based post-processing. We use a non-binary LDPC code for error correction (reverse reconciliation) and the Toeplitz matrix multiplication for privacy amplification.
Summary form only given. Continuous-variable quantum key distribution (CVQKD) is a promising alternative to commonly used discrete-variable QKD protocols, because this technology can be implemented with standard telecom components and recent results suggest that it will be compatible with standard wavelength division multiplexed telecommunication networks [1]. Security proofs against general eavesdropping attacks are available for CVQKD protocols using Gaussian modulation [2], and field implementations over deployed telecommunication networks have been demonstrated over the past few years [3].Long-distance operation of CVQKD systems, however, has been hindered until now by the limited efficiency of the complex error-correction (or reconciliation) algorithms that are required to extract the secret key from the correlated data shared by Alice and Bob. We have designed high-efficiency error correcting-codes [4] allowing to extract an errorless secret key in a CVQKD protocol using a Gaussian modulation of coherent states and a homodyne detection system. These codes are available for a wide range of signal-to-noise ratios on a Gaussian noise channel with a binary modulation and can be combined with a multidimensional reconciliation method [5]. This improved reconciliation procedure considerably extends the secure range of a continuous-variable quantum key distribution with Gaussian modulation.
In the case of continuous-variable quantum key distribution (CV-QKD) systems, synchronization is a key technology that ensures that both the transmitter and receiver obtain corresponding data synchronously. By designing an ingenious time sequence for the transmitter and receiver and using the peaking value acquisition technique and time domain heterodyne detection, we experimentally realize a four-state discrete modulation CV-QKD with a repetition rate of 10 MHz, transmitting over a distance of 25 km. With well-designed time sequence of hardware, Alice and Bob can obtain corresponding data automatically without using numerous software calculation methods. The secure key rates are calculated by using the method proposed by the Lütkenhaus group at the University of Waterloo in Canada. In the calculation, we first estimate the first and the second moment by using the measured quadratures of displaced thermal states, followed by calculating the secret key rate by using the convex optimization method through the reconstruction of the moments. There is no need to assume a linear quantum transmission channel to estimate the excess noise. Finally, secure key rates of 0.0022—0.0091 bit/pulse are achieved, and the excess noise is between 0.016 and 0.103. In this study, first, we introduce the prepare-and-measure scheme and the entanglement-based scheme of the four-state discrete modulation protocol. The Wigner images of the four coherent states on Alice’s side, and four displaced thermal states on Bob’s side are presented. Second, the design of hardware synchronization time series is introduced comprehensively. Third, the CV-QKD experiment setup is introduced and the time sequence is verified. Finally, the calculation method of secure key rate using the first and the second moment of quadrature is explained in detail. The phase space distribution of quadratures is also presented. The secret key rate ranges between 0.0022 and 0.0091 bits/pulse, and the equivalent excess noise are between 0.016 and 0.103. The average secret key bit rate is 24 kbit/s. During the experiment, the first and the second moment of the quantum state at the receiver end are found to fluctuate owing to the finite-size effect. This effect reduces the value of the secure key rate and limits the transmission distance of the CV-QKD system. In conclusion, four-state discrete modulation CV-QKD based on hardware synchronization is designed and demonstrated. The proposed hardware synchronization method can effectively reduce the cost, size, and power consumption. In the future, the finite-size effect will be investigated theoretically and experimentally to improve the performance of system.
Continuous-variable (CV) quantum key distribution (QKD) allows for quantum secure communication with the benefit of being close to classical coherent communication. In recent years, CV QKD protocols using a discrete number of displaced coherent states have been studied intensively as the modulation can be directly implemented with real devices with finite resolution. Until now, experiments only calculated key rates in the asymptotic regime. Here, we present a CV QKD system using discrete modulation that is especially designed for atmospheric channels. We use polarization encoding to exploit the nonbirefringent nature of the turbulent atmosphere. This allows to expand CV QKD networks beyond the existing fiber backbone. In a laboratory demonstration with a static 3-decibel loss channel, we implemented a recently developed security proof allowing to calculate composable finite-size key rates against independently and identically distributed collective attacks. We applied the full QKD protocol including a quantum random number generator, error correction, and privacy amplification to extract secret keys.
Abstract Continuous variable quantum key distribution (CV-QKD) is a promising emerging technology for the distribution of secure keys for symmetric encryption. It can be readily implemented using commercial off-the-shelf optical telecommunications components. A key requirement of the CV-QKD receiver is the ability to measure the quantum states at the correct time instance and rate using the correct orthogonal observables, referred to as synchronization. We propose a digital synchronization procedure for a modern CV-QKD system with locally generated local oscillator for coherent reception. Our proposed method is modulation format independent allowing it to be used in a variety of CV-QKD systems. We experimentally investigate its performance with a Gaussian modulated CV-QKD system operating over a 10–20 km span of standard single mode fibre. Since the procedure does not require hardware modifications it paves the way for cost-effective QKD solutions that can adapt rapidly to changing environmental conditions.
Quantum information processing uses the laws of quantum physics to perform tasks that are infeasible or impossible classically. Within this broader programme, quantum communication has emerged as one of the most practically mature sub-fields of quantum information science, with several proposed protocols having already been demonstrated over deployed optical fibre and free-space links. Of the various platforms available for encoding quantum information for communication, the continuous-variable (CV) framework encodes information in the quadratures of the electromagnetic field and is therefore directly compatible with the existing machinery of classical coherent optical communications. The most prominent CV protocol is continuous-variable quantum key distribution (CV-QKD), which establishes an information-theoretically secure cryptographic key between two spatially separated parties. Because CV-QKD reuses much of the hardware of classical coherent telecommunications, including off-the-shelf lasers, modulators, and balanced detectors, it is a leading candidate for the deployment of quantum-secured communication over standard optical fibre networks. The development of CV-QKD has typically proceeded with the underlying physics dictating the engineering. Security proofs, often relying on the Gaussian optimality of collective attacks, set the structure of the protocol, and the practical system is then built to satisfy the assumptions on which those proofs depend. Contributions of this thesis adopt the opposite view, taking the practical engineering of high-rate CV-QKD systems as the starting point and developing the theoretical machinery required to support it. The first contribution is the formalisation of one-round sliced reconciliation with guard-band post-selection as a key distillation scheme designed for real-time, high-throughput operation. Originally introduced experimentally as a means to stabilise bit error rates and enable the use of fixed-rate error correction codes at high symbol rates, guard-band post-selection is shown here to identify the guard-band span as a free parameter that can be tuned to hold the quantum bit error rate approximately constant across a range of channel conditions. However, conditioning on accepted data produces non-Gaussian post-selected statistics that lie outside the reach of standard Gaussian-optimality security arguments, which motivates the remaining two contributions. The second contribution is an asymptotic security analysis of guard-band post-selected CV-QKD against arbitrary collective attacks, no longer restricted to Gaussian adversaries. By using a quantum channel estimate as side information and by lifting reduced-state distances to purification distances via entropic continuity bounds, security is certified against the class of channels lying close to a Gaussian thermal-loss reference, with a key-rate penalty that scales with the energy-constrained diamond distance to that reference. The third contribution is the experimental basis required to apply this framework in practice. A lightweight three-stage protocol for quantum channel estimation is proposed and demonstrated, which repurposes the Gaussian probe constellation already present in the CV-QKD signal and requires no additional hardware or modifications to the underlying protocol. Over single-mode optical fibre at distances from 10 km to 50 km, the protocol produces physically valid process tensor estimates whose energy-constrained diamond distances to a Gaussian reference channel remain on the order of 10^(-3) throughout. Together, these three contributions provide a treatment of post-selected Gaussian-modulated CV-QKD in which the engineering, the security theory, and the channel characterisation are designed to operate together within a deployable system.