Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Quantum optics in superconducting circuits : Generating, engineering and detecting microwave photons

Sankar Raman Sathyamoorthy

Published Jan 1, 2017• 0 citations
OpenAlex

Abstract

Quantum optics in superconducting circuits, known as circuit QED, studies the interaction of photons at microwave frequencies with artificial atoms made of Josephson junctions. Although quite young, remarkable progress has been made in this field over the past decade, especially given the interest in building a quantum computer using superconducting circuits. In this thesis based on the appended papers, we look at generation, engineering and detection of microwave photons using superconducting circuits. We do this by taking advantage of the strong coupling, on-chip tunability and huge nonlinearity available in superconducting circuits. First, we present the strong photon-photon interaction measured experimentally, as shown in the giant cross-Kerr effect. In this work, conditional phase shift of about 20 degrees per photon was measured between two coherent fields at single photon level. Given this strong interaction, we propose and analyze a cascaded setup based on the cross-Kerr effect to detect itinerant microwave photons, a long outstanding problem with only recent experimental realizations. We show that a nondestructive detection of microwave photons is possible with few cascaded transmons. The on-chip tunability of Superconducting Quantum Interference Device (SQUID) is exploited to create a tunable superconducting resonator in the next presented experimental work. Finally, we show that by placing the atom at the end of a transmission line, microwave photons can be generated efficiently and on-demand. We also present a setup that can generate the photons in arbitrary wave packets.

Related papers

Engineering and detecting microwave photons

Sankar Raman Sathyamoorthy

Microwave quantum optics using superconducting circuits, also known as circuit QED, is a recent and promising field to study light-matter interactions at the fundamental level. In this field, artificial atoms made of superconducting elements interact with microwave photons routed through one dimensional transmission lines. This thesis is under the purview of circuit QED and is based on the three appended papers. In these three articles, we look at the problems of engineering photon-photon interaction (a la cross-Kerr effect) in microwaves using an artificial atom, storing and retrieving microwave photons using a tunable cavity and finally detecting a single propagating microwave photon non-destructively. The analysis is done using the framework of open quantum systems, where we use master equations and stochastic master equations to study the evolution of these artificial atoms in the presence of environment and under measurements respectively.

•Jan 1, 2015•0 citations

Propagating microwave photons in superconducting circuits

Juan José García‐Ripoll, J. J. Mazo, E. Solano +1 more

In the last decade, the field of Quantum Optics has been enriched with a completely new platform: superconducting quantum circuits, also known as circuit-QED. This platform builds on the original designs of superconducting qubits, that is few-level systems made of superconducting islands and Josephson junctions, but adds to it a new ingredient, microwave photons. In this talk I will review circuit-QED with a focus on two complementary lines of research: ultrastrong light-matter coupling and strongly correlated propagating photons. The first topic deals with novel designs of superconducting qubits, engineering their coupling to the microwave radiation field to reach Rabi frequencies that approach the qubit and photon frequencies. In this regime, known as ”ultrastrong coupling”, the rotating wave approximation from Quantum Optics is no longer valid, the vacuum may spontaneously polarize, producing photons that get bound to the qubit, and novel physics is expected to emerge. I will review recent experiments on this topic, together with various theoretical proposals to tame this ultrastrong coupling. The second topic revolves around the notion of ”propagating” photons in these circuits. Most experiments in circuit-QED so far adopted the typical configuration of artificial atoms (qubits) interacting with artificial cavities (LC resonators). This proved useful in order to reach the strong coupling regime, demonstrating Rabi oscillations and developing a variety of protocols for quantum information, tomograhy, entanglement, etc. However, recent experiments have shown that it is possible to also work with propagating photons, replacing the LC resonators with open transmission lines, and studying the scattering properties of those artificial atoms. In this context we have worked on developing new technology to detect and control these photons, engineering single-photon detectors, quantum metamaterials and photonic crystals, or even new nonlinear media based on coupled cavities.

•Sep 9, 2012•0 citations

Quantum Optics with Propagating Microwaves in Superconducting Circuits

I. Hoi

We address recent advances in quantum optics with propagating microwaves\nin superconducting circuits. This research field exploits on the fact that the coupling between a superconducting artificial atom and propagating microwave photons in a one-dimensional (1D) open transmission line can be made strong enough to observe quantum effects, without using any cavity to confine the microwave photons.\nWe embed an artificial atom, a superconducting transmon qubit, in a 1D open\ntransmission line and investigate the scattering properties of coherent microwaves. When an input coherent state, with an average photon number much less than 1, is on resonance with the artificial atom, we observe extinction of up to 99% in the forward propagating field. We observe the strong nonlinearity of the artificial atom and under strong driving we observe the Mollow triplet. We also study the statistics of the reflected and transmitted beams, which are predicted to be nonclassical states. In particular, we demonstrate photon antibunching in the reflected beam by measuring the second-order correlation function. By applying a second control tone, we observe the Autler-Townes splitting and a giant cross-Kerr effect.\nFurthermore, we demonstrate fast operation of a single-photon router using\nthe Autler-Townes splitting. This device provides important steps towards the realization of a quantum network. This thesis describes the motivation, theoretical background, design, implementation and measurement results.

•Jan 1, 2013•5 citations

Microwave Quantum Optics using Giant Artificial Atoms and Parametrically Coupled Superconducting Cavities

Rao Ananthapadmanabha, Vadiraj Manjunath

Artificially engineered atoms, built using superconducting electrical circuits, have had a broad impact on the field of quantum information and quantum computing. Based on the Josephson effect, superconducting qubits have provided a robust platform for engineering light-matter interactions at the single-photon level. The ability to precisely control and manipulate single photons using superconducting qubits and cavities, a field now popularly known as circuit quantum electrodynamics (circuit QED), has enabled new and novel regimes in quantum physics, which previously remained inaccessible. For instance, the coupling between individual photons and artificial atoms have been shown to reach the ultrastrong and deep-strong regimes, a feat which is difficult to achieve with natural atoms. The superconducting circuit platform is now a promising contender for building large-scale quantum processors, attracting large investments from academic, industry and government players. \n \nThis thesis uses superconducting circuits to engineer photon interactions in two separate studies. The first is aimed at studying the physics of ``giant" artificial-atoms. The second study explores the route towards building a quantum heat engine using two parametrically-coupled, superconducting microwave cavities. We review the theoretical ideas and concepts which motivate our work, along with discussions of the design methodology, simulations, fabrication, measurement setup and the experimental findings. \n \nIn the first study, we explore a giant artificial atom, formed from a transmon qubit, which is coupled to propagating microwaves at multiple points along an open transmission line. The multipoint coupling nature of the transmon allows its radiated field to interfere with itself leading to some striking ``giant" atom effects. For instance, we observe strong frequency dependent couplings of the transmon's transition levels to its electromagnetic environment, a feature which is not observed with ordinary artificial atoms. We measure large on/off ratios, as high as $380$, for the coupling rate of the $\\ket{0}-\\ket{1}$ transition. Furthermore, we show that we can enhance or suppress the coupling rate of the $\\ket{1}-\\ket{2}$ transition relative to the $\\ket{0}-\\ket{1}$ transition, by more than a factor of $200$. The relative modulation of the coupling rates was exploited to engineer a metastable state in the giant transmon and demonstrate electromagnetically-induced transparency (EIT), a typical signature of a lambda system. Our results show that we can transform the ladder structure of an ordinary transmon into a more interesting lambda system using a giant transmon, thereby paving the way for exploring new possibilities to study three-level physics in a waveguide-QED setting. \n \nExtending giant atom physics to multiple giant atoms, we then explore a device with two giant artificial atoms connected in a braided configuration to a transmission line. The braided topology of the qubits, offers an interesting regime where the qubits can interact with each other in a decoherence-free environment, where the interaction is mediated by virtual photons in the transmission line. We probe the resonant behavior of the qubits at two different frequency bias points, where we observe qualitatively different scattering behavior. Furthermore, when probing for the Autler-Townes Splitting (ATS), multiple resonances are observed for both resonant and off-resonant cases instead of the familiar doublet in the ATS spectroscopy. This comes as a surprise as the frequency-level spacings in both qubits are nominally identical. We believe these features could be an indication of a novel resonant interaction between the qubits facilitated by the braided topology. An effort to understand this theoretically is underway. \n \nFor our second study, we explore a system with two parametrically-coupled superconducting resonators, which implements an optomechanical-like interaction in an all-electrical network. The nonlinear nature of this interaction is mediated by a superconducting quantum interference device (SQUID), where the current in one resonator couples to the photon number in the other resonator. We propose to use this system to build a ``photonic piston" engine in the quantum regime. We motivate the feasibility of the proposal by reviewing key theoretical results which demonstrate an Otto-cycle by appropriately driving the system with noise. Our experimental findings demonstrate the crucial nonlinear coupling that is required for the engine to work. We also show that we can increase the coupling strength between the resonators depending on the chosen flux operating point.

•Aug 28, 2020•0 citations

Measurement Back-Action and Photon Detection in Microwave Quantum Optics

Anton Frisk Kockum

In quantum optics, the interaction between atoms and photons is studied. In recent years, microwave quantum optics with superconducting circuits has emerged as an important tool for fundamental quantum optics experiments, and also as a promising way for implementing quantum computation. The main reason for this development is the ease with which strong coupling and other properties of artificial atoms and microwave photons can be engineered in such a setup. This thesis is comprised of two papers dealing with measurements in microwave quantum optics. In Paper I, we show how unwanted measurement back-action can be undone for certain measurements on one and two qubits dispersively coupled to a microwave resonator. An important application of this result is to improve parity measurements, which are integral to error-correction codes needed to implement large-scale quantum computing. In Paper II, we investigate the possibility of using a three-level artificial atom, a transmon, to mediate a cross-Kerr type interaction between photons. The idea is to use it as a single-photon detector in the microwave regime, a component currently missing in the experimentalist's toolbox. We show that there are fundamental limitations to this setup, resulting in an unsatisfactory signal-to-noise ratio.

•Jan 1, 2012•3 citations

Kvanttilaskenta kiertävillä mikroaaltofotoneilla

Janne I. Kokkala

Microwave photons in superconducting circuits is a promising approach for quantum computing due to long coherence times and the easy controllability of superconducting devices. However, as the search of the ultimate design of a quantum computer is still ongoing, various suggestions for the realization of a quantum bit, qubit, exist even in the area of superconducting circuits. In this thesis, we study theoretically quantum computing using itinerant microwave photons as qubits. Basic tools for treating the reflection of wave packets and the noise generated by resistive elements in a circuit are derived starting from a widely used model for superconducting transmission lines. We also present simple quantum devices that can act as quantum gates for microwave qubits, including a novel suggestion for a tunable phase shifter. A tunable phase shifter is a useful component in the study of microwave photons in general as well as in quantum computing. The tunable phase shifter consists of three superconducting quantum interference devices (SQUIDs) that can be treated as tunable inductors in the low-power regime. The results of this thesis can be used both in applications related to quantum computing and in the general study of quantum mechanics in circuits. In particular, we conclude that there exist feasible system parameters, for which it should be possible to demonstrate the tunable phase shifter utilizing available experimental techniques. We also show the principle how the possible nonlinearity of the phase shifter can be used in a two-qubit gate providing interactions between microwave photons.

•Jan 1, 2013•0 citations
Quantum optics in superconducting circuits, known as circuit QED, studies the interaction of photons at microwave frequencies with artificial atoms made of Josephson junctions. Although quite young, remarkable progress has been made in this field over the past decade, especially given the interest in building a quantum computer using superconducting circuits. In this thesis based on the appended papers, we look at generation, engineering and detection of microwave photons using superconducting circuits. We do this by taking advantage of the strong coupling, on-chip tunability and huge nonlinearity available in superconducting circuits. First, we present the strong photon-photon interaction measured experimentally, as shown in the giant cross-Kerr effect. In this work, conditional phase shift of about 20 degrees per photon was measured between two coherent fields at single photon level. Given this strong interaction, we propose and analyze a cascaded setup based on the cross-Kerr effect to detect itinerant microwave photons, a long outstanding problem with only recent experimental realizations. We show that a nondestructive detection of microwave photons is possible with few cascaded transmons. The on-chip tunability of Superconducting Quantum Interference Device (SQUID) is exploited to create a tunable superconducting resonator in the next presented experimental work. Finally, we show that by placing the atom at the end of a transmission line, microwave photons can be generated efficiently and on-demand. We also present a setup that can generate the photons in arbitrary wave packets.
Microwave quantum optics using superconducting circuits, also known as circuit QED, is a recent and promising field to study light-matter interactions at the fundamental level. In this field, artificial atoms made of superconducting elements interact with microwave photons routed through one dimensional transmission lines. This thesis is under the purview of circuit QED and is based on the three appended papers. In these three articles, we look at the problems of engineering photon-photon interaction (a la cross-Kerr effect) in microwaves using an artificial atom, storing and retrieving microwave photons using a tunable cavity and finally detecting a single propagating microwave photon non-destructively. The analysis is done using the framework of open quantum systems, where we use master equations and stochastic master equations to study the evolution of these artificial atoms in the presence of environment and under measurements respectively.
In the last decade, the field of Quantum Optics has been enriched with a completely new platform: superconducting quantum circuits, also known as circuit-QED. This platform builds on the original designs of superconducting qubits, that is few-level systems made of superconducting islands and Josephson junctions, but adds to it a new ingredient, microwave photons. In this talk I will review circuit-QED with a focus on two complementary lines of research: ultrastrong light-matter coupling and strongly correlated propagating photons. The first topic deals with novel designs of superconducting qubits, engineering their coupling to the microwave radiation field to reach Rabi frequencies that approach the qubit and photon frequencies. In this regime, known as ”ultrastrong coupling”, the rotating wave approximation from Quantum Optics is no longer valid, the vacuum may spontaneously polarize, producing photons that get bound to the qubit, and novel physics is expected to emerge. I will review recent experiments on this topic, together with various theoretical proposals to tame this ultrastrong coupling. The second topic revolves around the notion of ”propagating” photons in these circuits. Most experiments in circuit-QED so far adopted the typical configuration of artificial atoms (qubits) interacting with artificial cavities (LC resonators). This proved useful in order to reach the strong coupling regime, demonstrating Rabi oscillations and developing a variety of protocols for quantum information, tomograhy, entanglement, etc. However, recent experiments have shown that it is possible to also work with propagating photons, replacing the LC resonators with open transmission lines, and studying the scattering properties of those artificial atoms. In this context we have worked on developing new technology to detect and control these photons, engineering single-photon detectors, quantum metamaterials and photonic crystals, or even new nonlinear media based on coupled cavities.
We address recent advances in quantum optics with propagating microwaves\nin superconducting circuits. This research field exploits on the fact that the coupling between a superconducting artificial atom and propagating microwave photons in a one-dimensional (1D) open transmission line can be made strong enough to observe quantum effects, without using any cavity to confine the microwave photons.\nWe embed an artificial atom, a superconducting transmon qubit, in a 1D open\ntransmission line and investigate the scattering properties of coherent microwaves. When an input coherent state, with an average photon number much less than 1, is on resonance with the artificial atom, we observe extinction of up to 99% in the forward propagating field. We observe the strong nonlinearity of the artificial atom and under strong driving we observe the Mollow triplet. We also study the statistics of the reflected and transmitted beams, which are predicted to be nonclassical states. In particular, we demonstrate photon antibunching in the reflected beam by measuring the second-order correlation function. By applying a second control tone, we observe the Autler-Townes splitting and a giant cross-Kerr effect.\nFurthermore, we demonstrate fast operation of a single-photon router using\nthe Autler-Townes splitting. This device provides important steps towards the realization of a quantum network. This thesis describes the motivation, theoretical background, design, implementation and measurement results.
Artificially engineered atoms, built using superconducting electrical circuits, have had a broad impact on the field of quantum information and quantum computing. Based on the Josephson effect, superconducting qubits have provided a robust platform for engineering light-matter interactions at the single-photon level. The ability to precisely control and manipulate single photons using superconducting qubits and cavities, a field now popularly known as circuit quantum electrodynamics (circuit QED), has enabled new and novel regimes in quantum physics, which previously remained inaccessible. For instance, the coupling between individual photons and artificial atoms have been shown to reach the ultrastrong and deep-strong regimes, a feat which is difficult to achieve with natural atoms. The superconducting circuit platform is now a promising contender for building large-scale quantum processors, attracting large investments from academic, industry and government players. \n \nThis thesis uses superconducting circuits to engineer photon interactions in two separate studies. The first is aimed at studying the physics of ``giant" artificial-atoms. The second study explores the route towards building a quantum heat engine using two parametrically-coupled, superconducting microwave cavities. We review the theoretical ideas and concepts which motivate our work, along with discussions of the design methodology, simulations, fabrication, measurement setup and the experimental findings. \n \nIn the first study, we explore a giant artificial atom, formed from a transmon qubit, which is coupled to propagating microwaves at multiple points along an open transmission line. The multipoint coupling nature of the transmon allows its radiated field to interfere with itself leading to some striking ``giant" atom effects. For instance, we observe strong frequency dependent couplings of the transmon's transition levels to its electromagnetic environment, a feature which is not observed with ordinary artificial atoms. We measure large on/off ratios, as high as 380380380, for the coupling rate of the ket0−ket1\\ket{0}-\\ket{1}ket0−ket1 transition. Furthermore, we show that we can enhance or suppress the coupling rate of the ket1−ket2\\ket{1}-\\ket{2}ket1−ket2 transition relative to the ket0−ket1\\ket{0}-\\ket{1}ket0−ket1 transition, by more than a factor of 200200200. The relative modulation of the coupling rates was exploited to engineer a metastable state in the giant transmon and demonstrate electromagnetically-induced transparency (EIT), a typical signature of a lambda system. Our results show that we can transform the ladder structure of an ordinary transmon into a more interesting lambda system using a giant transmon, thereby paving the way for exploring new possibilities to study three-level physics in a waveguide-QED setting. \n \nExtending giant atom physics to multiple giant atoms, we then explore a device with two giant artificial atoms connected in a braided configuration to a transmission line. The braided topology of the qubits, offers an interesting regime where the qubits can interact with each other in a decoherence-free environment, where the interaction is mediated by virtual photons in the transmission line. We probe the resonant behavior of the qubits at two different frequency bias points, where we observe qualitatively different scattering behavior. Furthermore, when probing for the Autler-Townes Splitting (ATS), multiple resonances are observed for both resonant and off-resonant cases instead of the familiar doublet in the ATS spectroscopy. This comes as a surprise as the frequency-level spacings in both qubits are nominally identical. We believe these features could be an indication of a novel resonant interaction between the qubits facilitated by the braided topology. An effort to understand this theoretically is underway. \n \nFor our second study, we explore a system with two parametrically-coupled superconducting resonators, which implements an optomechanical-like interaction in an all-electrical network. The nonlinear nature of this interaction is mediated by a superconducting quantum interference device (SQUID), where the current in one resonator couples to the photon number in the other resonator. We propose to use this system to build a ``photonic piston" engine in the quantum regime. We motivate the feasibility of the proposal by reviewing key theoretical results which demonstrate an Otto-cycle by appropriately driving the system with noise. Our experimental findings demonstrate the crucial nonlinear coupling that is required for the engine to work. We also show that we can increase the coupling strength between the resonators depending on the chosen flux operating point.
In quantum optics, the interaction between atoms and photons is studied. In recent years, microwave quantum optics with superconducting circuits has emerged as an important tool for fundamental quantum optics experiments, and also as a promising way for implementing quantum computation. The main reason for this development is the ease with which strong coupling and other properties of artificial atoms and microwave photons can be engineered in such a setup. This thesis is comprised of two papers dealing with measurements in microwave quantum optics. In Paper I, we show how unwanted measurement back-action can be undone for certain measurements on one and two qubits dispersively coupled to a microwave resonator. An important application of this result is to improve parity measurements, which are integral to error-correction codes needed to implement large-scale quantum computing. In Paper II, we investigate the possibility of using a three-level artificial atom, a transmon, to mediate a cross-Kerr type interaction between photons. The idea is to use it as a single-photon detector in the microwave regime, a component currently missing in the experimentalist's toolbox. We show that there are fundamental limitations to this setup, resulting in an unsatisfactory signal-to-noise ratio.
Microwave photons in superconducting circuits is a promising approach for quantum computing due to long coherence times and the easy controllability of superconducting devices. However, as the search of the ultimate design of a quantum computer is still ongoing, various suggestions for the realization of a quantum bit, qubit, exist even in the area of superconducting circuits. In this thesis, we study theoretically quantum computing using itinerant microwave photons as qubits. Basic tools for treating the reflection of wave packets and the noise generated by resistive elements in a circuit are derived starting from a widely used model for superconducting transmission lines. We also present simple quantum devices that can act as quantum gates for microwave qubits, including a novel suggestion for a tunable phase shifter. A tunable phase shifter is a useful component in the study of microwave photons in general as well as in quantum computing. The tunable phase shifter consists of three superconducting quantum interference devices (SQUIDs) that can be treated as tunable inductors in the low-power regime. The results of this thesis can be used both in applications related to quantum computing and in the general study of quantum mechanics in circuits. In particular, we conclude that there exist feasible system parameters, for which it should be possible to demonstrate the tunable phase shifter utilizing available experimental techniques. We also show the principle how the possible nonlinearity of the phase shifter can be used in a two-qubit gate providing interactions between microwave photons.