Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Bulletin of the American Physical Society

Design and Simulation of Microwave Attenuators for Superconducting Quantum Devices

Jay C. LeFebvre, Jen-Hao Yeh, F. C. Wellstood, Benjamin A. Palmer

Published Mar 18, 2016• 0 citations
OpenAlex

Related papers

Simulation of Superconducting Microwave Resonators

Antti Jokiluoma

•May 17, 2015•0 citations

Design of Microwave Calibration Standards for Characterising S-Parameters of Quantum Integrated Circuits at Millikelvin Temperatures

Manoj Stanley, Sebastian E. de Graaf, T. Lindström +3 more

In the field of quantum information science, superconducting quantum integrated circuits are operated at millikelvin temperatures inside dilution refrigerators. The microwave performance of such non-connectorised devices can be characterised by measuring their calibrated S-parameters. The design of high-quality microwave standards is essential to achieve accurate calibration. In this work we describe the architecture of a full 2-port S-parameter measurement set-up for use at millikelvin temperatures along with the microwave calibration unit. The design of the standards for use in the calibration unit at millikelvin temperatures is described and verified using electromagnetic simulation and measurements. The suitability of the standards is verified by characterising a commercial attenuator as a test device.

European Microwave Conference (EuMC)•Apr 4, 2022•2 citations

Microwave design for superconductor circuits

Pascal Febvre

•Sep 29, 2024•0 citations

Coplanar waveguide superconducting microwave power divider: Design, preparation and experimental tests

Bo Zhang, Qing He, Xin-Da Yang +3 more

Power divider is a useful device that divides the power of signal into different subpowers at a certain ratio. The superconducting power divider plays an important role in various superconducting quantum computing circuits and superconducting microwave photon detectors. Therefore, in this paper we investigate how to design and prepare a typical coplanar waveguide superconducting microwave power divider. The parameters are designed by using the odd-even mode method to analyze the transport features of a three-port microwave network. Specifically, the microwave transport properties of the device with a center frequency of 5 GHz and 3 dB power division ratio are simulated. Then, the designed aluminum coplanar waveguide superconducting power divider on silicon is prepared by micro-processing technology and experimentally tested at low temperature. It is shown that the measurement results are consistent with the design parameters. It is noted that the center frequency of the actually prepared power divider is measured to be about 5.25 GHz, which is slightly different from the result of the design and simulation. This difference is probably due to the following main reasons. Firstly, the limited precision of the micromachining process is caused by the fact that the fabricated quarter-wave impedance matching line is etched incompletely, leading the length of the impedance matching line to be shortened. As a consequence, the frequency of the prepared power divider is slightly higher. Secondly, the simulation software is not designed specially for superconducting device simulations, thereby yielding the design parameters slightly different from those of the fabricated superconducting devices. Additionally, a series of attenuations has been used in the experimental test system of the superconducting microwave power dividers for reducing the various noises. This causes the input test signal to weaken, thus the reflected signal turns significantly small. Therefore, none of the S11 parameters of the device can be effectively measured. Finally, neither of S21 and S31 parameters measured in the experiment is the predicted –3 dB, which is mainly due to the imperfections in the welding between SMA connectors and high-frequency transmission lines, and the spot welding between high-frequency transmission lines and power divider samples, and also due to the discontinuities of the high-frequency transmission line and the power divider and so on. All these factors can yield the tested insertion loss of the device. Hopefully, the method in this work can be extended to designing and preparing other passive superconducting microwave devices.

Acta Physica Sinica•Jan 1, 2021•0 citations

Cryogenic Analog Microwave Variable Attenuator Using rf-SQUIDs for Quantum Systems

Navjot K. Khaira, Tejinder Singh, Raafat R. Mansour

We present the design, fabrication and testing of a low-temperature superconducting (LTS) analog microwave variable attenuator. The two-port circuit includes two 90ohybrid couplers and a phase shifter to realize a variable attenuation at the output port. The wideband analog phase shifter is implemented using LTS microstrip transmission line (TL) coupled to an array of radio frequency superconducting quantum interference devices (rf-SQUIDs). The phase shift is achieved by passing a dc current through a TL adjacent to the SQUID-loaded microstrip line which controls the flux through the rf-SQUIDs. The proposed variable attenuator shows more than 30 dB of precise analog flat attenuation tuning range over 8 GHz to 12 GHz with a dc control current ranging from 0 mA to 4.5 mA. The device exhibits a wideband operation with variable attenuation seen not only in theX-band but also inKu-band. The device is fabricated using a multilayer niobium-based superconducting process SFQ5ee by MIT Lincoln Laboratory, and has a compact footprint of 1.3 mm2. To the best of our knowledge, this is the first implementation of a variable attenuator using distributed rf-SQUIDs. This device has implications in a variety of applications such as cryogenic receivers and qubit circuit measurements.

IEEE Transactions on Applied Superconductivity•Feb 14, 2023•3 citations

Superconducting Microwave Resonators

Charles Neill, A. Megrant, M. Lenander +17 more

Bulletin of the American Physical Society•Mar 1, 2012•0 citations
In the field of quantum information science, superconducting quantum integrated circuits are operated at millikelvin temperatures inside dilution refrigerators. The microwave performance of such non-connectorised devices can be characterised by measuring their calibrated S-parameters. The design of high-quality microwave standards is essential to achieve accurate calibration. In this work we describe the architecture of a full 2-port S-parameter measurement set-up for use at millikelvin temperatures along with the microwave calibration unit. The design of the standards for use in the calibration unit at millikelvin temperatures is described and verified using electromagnetic simulation and measurements. The suitability of the standards is verified by characterising a commercial attenuator as a test device.
Power divider is a useful device that divides the power of signal into different subpowers at a certain ratio. The superconducting power divider plays an important role in various superconducting quantum computing circuits and superconducting microwave photon detectors. Therefore, in this paper we investigate how to design and prepare a typical coplanar waveguide superconducting microwave power divider. The parameters are designed by using the odd-even mode method to analyze the transport features of a three-port microwave network. Specifically, the microwave transport properties of the device with a center frequency of 5 GHz and 3 dB power division ratio are simulated. Then, the designed aluminum coplanar waveguide superconducting power divider on silicon is prepared by micro-processing technology and experimentally tested at low temperature. It is shown that the measurement results are consistent with the design parameters. It is noted that the center frequency of the actually prepared power divider is measured to be about 5.25 GHz, which is slightly different from the result of the design and simulation. This difference is probably due to the following main reasons. Firstly, the limited precision of the micromachining process is caused by the fact that the fabricated quarter-wave impedance matching line is etched incompletely, leading the length of the impedance matching line to be shortened. As a consequence, the frequency of the prepared power divider is slightly higher. Secondly, the simulation software is not designed specially for superconducting device simulations, thereby yielding the design parameters slightly different from those of the fabricated superconducting devices. Additionally, a series of attenuations has been used in the experimental test system of the superconducting microwave power dividers for reducing the various noises. This causes the input test signal to weaken, thus the reflected signal turns significantly small. Therefore, none of the S11 parameters of the device can be effectively measured. Finally, neither of S21 and S31 parameters measured in the experiment is the predicted –3 dB, which is mainly due to the imperfections in the welding between SMA connectors and high-frequency transmission lines, and the spot welding between high-frequency transmission lines and power divider samples, and also due to the discontinuities of the high-frequency transmission line and the power divider and so on. All these factors can yield the tested insertion loss of the device. Hopefully, the method in this work can be extended to designing and preparing other passive superconducting microwave devices.
We present the design, fabrication and testing of a low-temperature superconducting (LTS) analog microwave variable attenuator. The two-port circuit includes two 90ohybrid couplers and a phase shifter to realize a variable attenuation at the output port. The wideband analog phase shifter is implemented using LTS microstrip transmission line (TL) coupled to an array of radio frequency superconducting quantum interference devices (rf-SQUIDs). The phase shift is achieved by passing a dc current through a TL adjacent to the SQUID-loaded microstrip line which controls the flux through the rf-SQUIDs. The proposed variable attenuator shows more than 30 dB of precise analog flat attenuation tuning range over 8 GHz to 12 GHz with a dc control current ranging from 0 mA to 4.5 mA. The device exhibits a wideband operation with variable attenuation seen not only in theX-band but also inKu-band. The device is fabricated using a multilayer niobium-based superconducting process SFQ5ee by MIT Lincoln Laboratory, and has a compact footprint of 1.3 mm2. To the best of our knowledge, this is the first implementation of a variable attenuator using distributed rf-SQUIDs. This device has implications in a variety of applications such as cryogenic receivers and qubit circuit measurements.