Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Conference on Lasers and Electro-Optics

Frequency-Domain Measurement of Spontaneous Emission Lifetime in Rare-Earth-Doped Gain Media

Emir Salih Magden, Patrick T. Callahan, Nanxi Li, Katia Shtyrkova, Alfonso Ruocco, Neetesh Singh, Ming Xin, Diedrik Vermeulen, Jonathan D. B. Bradley, Gerald Leake, Douglas D. Coolbaugh, L. A. Kolodziejski, Franz X. Käertner, Erich P. Ippen, Michael R. Watts

Published Jan 1, 2017• 0 citations
Publisher

Abstract

The spontaneous emission lifetime in Al2O3:Tm3+ waveguides is measured to be 568 ± 48 µs, using a frequency-domain method. The method is studied and verified in Er3+-doped silica fiber, yielding a measured lifetime of 9.73 ± 0.08 ms.
DOI
10.1364/cleo_si.2017.sm1k.3

Related papers

Frequency Domain Spectroscopy in Rare-Earth-Doped Gain Media

Emir Salih Magden, Patrick T. Callahan, Nanxi Li +6 more

Many spectroscopic techniques today rely on time-resolved measurements under short excitation pulses. Instead of using a chopped pump excitation, or ultrafast optical pulses, we expand on and apply the previously developed set of frequency domain methods to analyze the population level dynamics in rare-earth-doped media. By identifying the full frequency response of the gain medium, this method can accurately yield excited state lifetimes and can also be used to estimate transition cross-sections. The accuracy of the frequency domain methods are verified with Er3+-and Tm3+-doped fibers, and an Al2O3:Tm3+waveguide, recovering similar results as reported by time-resolved techniques. The complete frequency domain model presented here can be used in characterization of novel optical gain media, and can provide insights into population dynamics in solid state amplifiers and lasers.

IEEE Journal of Selected Topics in Quantum Electronics•Feb 15, 2018•10 citations

Low temperature study of rare earth doped glasses

Casey L. Richardson

In this paper, we present a low-temperature study of rare earth doped glasses, which are important for creating compact, efficient gain media. We resolved effective Stark components of erbium doped glasses by analyzing their absorption cross sections at T=293K and T=110K. Using these Stark energy levels and the McCumber theory, we calculated the radiative lifetime of the I/-I/ transition in erbium. Our calculated lifetime agrees with the measured lifetime for this transition better than previously accepted methods.

•Jan 1, 2000•0 citations

Controlled atomic spontaneous emission from Er3+ in a transparent Si/ SiO2 microcavity

Arjen M. Vredenberg, N. E. J. Hunt, E. Fred Schubert +3 more

The spontaneous emission lifetime and intensity of Er implanted into ${\mathrm{SiO}}_{2}$ is modified by a Si/${\mathrm{SiO}}_{2}$ planar microcavity. The cavity strongly affects the coupling of the optically excited ${\mathrm{Er}}^{3+}$ to the radiative and waveguiding modes of the system, resulting in a spontaneous lifetime of 14.8 ms for a cavity off-resonance with the ${\mathrm{Er}}^{3+}$ versus a lifetime of 9.1 ms for an on-resonance cavity. The observed spontaneous emission lifetime changes agree well with calculated values based on a computation method which is also presented.

Physical Review Letters•Jul 26, 1993•188 citations

Simultaneous measurements of lifetime, gain and emission cross section in a neodymium-doped fiber

Bernard Dussardier, Gérard Monnom, Eric Maurice +2 more

A method for measuring the gain and the emission cross section of the four-level neodymium system in doped waveguides is presented. The method is based on a temporal analysis of the fluorescence decay occurring when the pump is switched off, after establishing a steady-state with high levels of absorbed power. For the case of doped fibers, results obtained using this method are compared with the usual low signal amplification technique, using a launched signal in the fiber, and the agreement is good. It is shown that the technique allows a rapid, simple method of determining low signal gain.>

IEEE Photonics Technology Letters•Apr 1, 1993•2 citations

Simple and Accurate Fluorescence Lifetime Measurement Scheme Using Traditional Time-Domain Spectroscopy and Modern Digital Signal Processing

Amirhassan Zareanborji, Huayong Yang, Graham E. Town +2 more

Fluorescence lifetime measurement is an essential process for evaluation and application of optical gain media. An accurate and convenient scheme for fluorescence lifetime measurement of complex emission processes with either single or multiple fluorescence lifetimes is essential. We developed a new convolution-based scheme for fluorescence lifetime measurement. The innovation of the scheme lies in a combination of convolution-based digital signal processing algorithms with a low cost and simple time-domain spectroscopic setup. The convolution-based scheme is able to achieve accurate microsecond fluorescence lifetime resolution using the spectroscopic setup with only millisecond fluorescence lifetime resolution, for both single or multiple fluorescence lifetimes. We demonstrated the performance of the scheme, both theoretically and experimentally, by measuring fluorescence lifetimes associated with complicated emission processes in bismuth-erbium-doped fibers and erbium-doped fiber.

Journal of Lightwave Technology•Aug 25, 2016•14 citations

A theoretical investigation of the optical gain in waveguide based on a silica matrix containing silicon nanograins and doped either withNd3+ or with Er3+ ions

Alexandre Fafin, Julien Cardin, Christian Dufour +1 more

We aim to amplify a signal in a strip loaded waveguide composed by an active silica layer co-doped with silicon nanograins and rare-earth ions deposited on a silica cladding layer and topped by a silica strip. The signal wavelength corresponds to the transition wavelength between two energy levels of a rare earth ions. To achieve an efficient population inversion, the rare earth ions benefit from the indirect excitation via silicon nanograins which show an absorption cross section fourfold higher than the one of rare earth ions. In order to study the influence of the type of rare earth on the optical gain, we consider two rare earth ions : neodymium ions (Nd3+) for a signal wavelength at 1060 nm and erbium ions (Er3+) for a signal wavelength at 1540 nm. The optical gain is simulated using a modified two loops auxiliary-differential equation and finite-difference time-domain (ADE-FDTD) algorithm. Within this new scheme we can compute the steady state levels populations as well as the spatial distribution of the guided field in the waveguide whatever the populations levels lifetime considered. We also calculate the gross gain as well as the net gain by taking into account the experimental background losses. We demonstrate that a significant positive net gain can only be achieved with the Nd3+ doped waveguide up to 30 dB/cm for a pump power density of 10^4 mW/mm².

•May 11, 2015•0 citations
Many spectroscopic techniques today rely on time-resolved measurements under short excitation pulses. Instead of using a chopped pump excitation, or ultrafast optical pulses, we expand on and apply the previously developed set of frequency domain methods to analyze the population level dynamics in rare-earth-doped media. By identifying the full frequency response of the gain medium, this method can accurately yield excited state lifetimes and can also be used to estimate transition cross-sections. The accuracy of the frequency domain methods are verified with Er3+-and Tm3+-doped fibers, and an Al2O3:Tm3+waveguide, recovering similar results as reported by time-resolved techniques. The complete frequency domain model presented here can be used in characterization of novel optical gain media, and can provide insights into population dynamics in solid state amplifiers and lasers.
In this paper, we present a low-temperature study of rare earth doped glasses, which are important for creating compact, efficient gain media. We resolved effective Stark components of erbium doped glasses by analyzing their absorption cross sections at T=293K and T=110K. Using these Stark energy levels and the McCumber theory, we calculated the radiative lifetime of the I/-I/ transition in erbium. Our calculated lifetime agrees with the measured lifetime for this transition better than previously accepted methods.
The spontaneous emission lifetime and intensity of Er implanted into SiO2{\mathrm{SiO}}_{2}SiO2​ is modified by a Si/SiO2{\mathrm{SiO}}_{2}SiO2​ planar microcavity. The cavity strongly affects the coupling of the optically excited Er3+{\mathrm{Er}}^{3+}Er3+ to the radiative and waveguiding modes of the system, resulting in a spontaneous lifetime of 14.8 ms for a cavity off-resonance with the Er3+{\mathrm{Er}}^{3+}Er3+ versus a lifetime of 9.1 ms for an on-resonance cavity. The observed spontaneous emission lifetime changes agree well with calculated values based on a computation method which is also presented.
A method for measuring the gain and the emission cross section of the four-level neodymium system in doped waveguides is presented. The method is based on a temporal analysis of the fluorescence decay occurring when the pump is switched off, after establishing a steady-state with high levels of absorbed power. For the case of doped fibers, results obtained using this method are compared with the usual low signal amplification technique, using a launched signal in the fiber, and the agreement is good. It is shown that the technique allows a rapid, simple method of determining low signal gain.>
Fluorescence lifetime measurement is an essential process for evaluation and application of optical gain media. An accurate and convenient scheme for fluorescence lifetime measurement of complex emission processes with either single or multiple fluorescence lifetimes is essential. We developed a new convolution-based scheme for fluorescence lifetime measurement. The innovation of the scheme lies in a combination of convolution-based digital signal processing algorithms with a low cost and simple time-domain spectroscopic setup. The convolution-based scheme is able to achieve accurate microsecond fluorescence lifetime resolution using the spectroscopic setup with only millisecond fluorescence lifetime resolution, for both single or multiple fluorescence lifetimes. We demonstrated the performance of the scheme, both theoretically and experimentally, by measuring fluorescence lifetimes associated with complicated emission processes in bismuth-erbium-doped fibers and erbium-doped fiber.
We aim to amplify a signal in a strip loaded waveguide composed by an active silica layer co-doped with silicon nanograins and rare-earth ions deposited on a silica cladding layer and topped by a silica strip. The signal wavelength corresponds to the transition wavelength between two energy levels of a rare earth ions. To achieve an efficient population inversion, the rare earth ions benefit from the indirect excitation via silicon nanograins which show an absorption cross section fourfold higher than the one of rare earth ions. In order to study the influence of the type of rare earth on the optical gain, we consider two rare earth ions : neodymium ions (Nd3+) for a signal wavelength at 1060 nm and erbium ions (Er3+) for a signal wavelength at 1540 nm. The optical gain is simulated using a modified two loops auxiliary-differential equation and finite-difference time-domain (ADE-FDTD) algorithm. Within this new scheme we can compute the steady state levels populations as well as the spatial distribution of the guided field in the waveguide whatever the populations levels lifetime considered. We also calculate the gross gain as well as the net gain by taking into account the experimental background losses. We demonstrate that a significant positive net gain can only be achieved with the Nd3+ doped waveguide up to 30 dB/cm for a pump power density of 10^4 mW/mm².