Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

The Japan Society of Applied Physics

Superconducting Phase Shifters Using PdNi Thin Film Patterns

Shozo TANIGUCHI

Published Feb 6, 2014• 0 citations
OpenAlex

Related papers

Investigation of an electronically tuned 100 GHz superconducting phase shifter

Elie K. Track, Zhongxiang Shen, H. Dang +2 more

Turnable superconducting millimeter-wave phase shifters are discussed. The tuning mechanism is based on inductance modulation of NbN microstrips by excess quasiparticle injection. When measured by a DC method, using the interference patterns and resonances of specially designed DC SQUIDs, the inductance of NbN microstrips can be varied by up to 300%. Based on these results, superconducting microstrip interferometers to operate as low-power 100 GHz phase shifters were designed and fabricated. The 100 GHz signal is coupled into and out of the interferometers by finline antennas. Amplitude modulation of the output is used as the criterion for phase shift in one of the interferometer branches. Thin superconducting films (thinner than the penetration depth) and dielectric layers are needed to achieve tunability of the inductance. The conflicting requirements of tunability and efficient signal coupling are quantified in the interferometer testing, and the range of parameter optimization is bracketed. The elements of this required optimization are presented.

IEEE Transactions on Magnetics•Mar 1, 1991•9 citations

Magnetic control of superconducting phase-shifters with experimental verification

Robert Ernest Troxler

•Dec 1, 1992•1 citation

SUPERCONDUCTING QUANTUM PHASE DEVICES

John L. Clarke

•May 1, 1971•0 citations

A hybrid phase shifter circuit based on TlCaBaCuO superconducting thin films

G. Subramanyam, Vikram J. Kapoor, K. B. Bhasin

A superconductor-semiconductor hybrid reflection-type phase shifter circuit has been designed, fabricated, and characterized for 180/spl deg/ phase bit with center frequency of 4 GHz and bandwidth of 0.5 GHz for operation at 77 K. All of the passive components of the phase shifter circuit such as input/output feed lines, 3 dB Lange coupler, impedance matching networks, and transmission lines consisted of thallium based superconducting TlCaBaCuO thin films of 4000 /spl Aring/ thickness on lanthanum aluminate substrate. Metal-Schottky field-effect-transistors (MESFET's) on GaAs semiconductor were used as active devices for switching action (on-state and off-state) in the phase shifter circuit. The phase shift and insertion losses were investigated as a function of frequency from 3.6 to 4.6 GHz at 77 K. The circuit exhibited a fairly flat response of 180/spl deg/ phase shift with a maximum deviation of less than 2/spl deg/ and a maximum insertion loss of 2 dB for on-state and 2.2 dB for off-state conditions over 0.5 GHz bandwidth at 4 GHz. The insertion losses were also fairly flat within the bandwidth. The insertion losses were constant between 50 and 80 K, giving the circuit a large range of operation at or below 77 K. The performance of this circuit as compared to a gold microstrip-semiconductor circuit designed identically was superior by a factor of 1.5, and may be due to lower conductor losses and lower surface resistance in the superconducting microstrips.>

IEEE Transactions on Microwave Theory and Techniques•Mar 1, 1995•5 citations

Superconducting thin film nanoelectronics

Adam N. McCaughan

Superconducting devices have found application in a diverse set of fields due to their unique properties which cannot be reproduced in normal materials. Although many of these devices rely on the properties of bulk superconductors, superconducting devices based on thin films are finding increasing application, especially in the realms of sensing and amplification. With recent advances in electron-beam lithography, superconducting thin films can be patterned into geometries with feature sizes at or below the characteristic length scales of the superconducting state. By patterning 2D geometries with features smaller than these characteristic length scales, we were able to use nanoscale phenomena which occur in thin superconducting films to create superconducting devices which performed useful tasks such as sensor amplification, logical processing, and fluxoid state sensing. In this thesis, I describe the development, characterization, and application of three novel superconducting nanoelectronic devices: the nTron, the yTron, and the current-controlled nanoSQUID. These devices derive their functionality from the exploitation of nanoscale superconducting effects such as kinetic inductance, electrothermal suppression, and current-crowding. Patterning these devices from superconducting thin-films has allowed them to be integrated monolithically with each other and other thin-film superconducting devices such as the superconducting nanowire single-photon detector.

•Jan 1, 2015•1 citation

Superconducting Coplanar Switch and Phase Shifter for CMB Applications

G. Bordier, Davide Cammilleri, B. Bélier +6 more

Journal of Low Temperature Physics•Mar 3, 2016•0 citations
Turnable superconducting millimeter-wave phase shifters are discussed. The tuning mechanism is based on inductance modulation of NbN microstrips by excess quasiparticle injection. When measured by a DC method, using the interference patterns and resonances of specially designed DC SQUIDs, the inductance of NbN microstrips can be varied by up to 300%. Based on these results, superconducting microstrip interferometers to operate as low-power 100 GHz phase shifters were designed and fabricated. The 100 GHz signal is coupled into and out of the interferometers by finline antennas. Amplitude modulation of the output is used as the criterion for phase shift in one of the interferometer branches. Thin superconducting films (thinner than the penetration depth) and dielectric layers are needed to achieve tunability of the inductance. The conflicting requirements of tunability and efficient signal coupling are quantified in the interferometer testing, and the range of parameter optimization is bracketed. The elements of this required optimization are presented.
A superconductor-semiconductor hybrid reflection-type phase shifter circuit has been designed, fabricated, and characterized for 180/spl deg/ phase bit with center frequency of 4 GHz and bandwidth of 0.5 GHz for operation at 77 K. All of the passive components of the phase shifter circuit such as input/output feed lines, 3 dB Lange coupler, impedance matching networks, and transmission lines consisted of thallium based superconducting TlCaBaCuO thin films of 4000 /spl Aring/ thickness on lanthanum aluminate substrate. Metal-Schottky field-effect-transistors (MESFET's) on GaAs semiconductor were used as active devices for switching action (on-state and off-state) in the phase shifter circuit. The phase shift and insertion losses were investigated as a function of frequency from 3.6 to 4.6 GHz at 77 K. The circuit exhibited a fairly flat response of 180/spl deg/ phase shift with a maximum deviation of less than 2/spl deg/ and a maximum insertion loss of 2 dB for on-state and 2.2 dB for off-state conditions over 0.5 GHz bandwidth at 4 GHz. The insertion losses were also fairly flat within the bandwidth. The insertion losses were constant between 50 and 80 K, giving the circuit a large range of operation at or below 77 K. The performance of this circuit as compared to a gold microstrip-semiconductor circuit designed identically was superior by a factor of 1.5, and may be due to lower conductor losses and lower surface resistance in the superconducting microstrips.>
Superconducting devices have found application in a diverse set of fields due to their unique properties which cannot be reproduced in normal materials. Although many of these devices rely on the properties of bulk superconductors, superconducting devices based on thin films are finding increasing application, especially in the realms of sensing and amplification. With recent advances in electron-beam lithography, superconducting thin films can be patterned into geometries with feature sizes at or below the characteristic length scales of the superconducting state. By patterning 2D geometries with features smaller than these characteristic length scales, we were able to use nanoscale phenomena which occur in thin superconducting films to create superconducting devices which performed useful tasks such as sensor amplification, logical processing, and fluxoid state sensing. In this thesis, I describe the development, characterization, and application of three novel superconducting nanoelectronic devices: the nTron, the yTron, and the current-controlled nanoSQUID. These devices derive their functionality from the exploitation of nanoscale superconducting effects such as kinetic inductance, electrothermal suppression, and current-crowding. Patterning these devices from superconducting thin-films has allowed them to be integrated monolithically with each other and other thin-film superconducting devices such as the superconducting nanowire single-photon detector.