A highly polarized atomic 23Na beam is produced by optical pumping using either a multimode cw dye laser or a single mode ring dye laser followed by a double pass acousto‐optic modulator. Electron spin polarizations of 0.72 to 0.90 are obtained.
A highly polarized 23Na atomic beam is produced by optical pumping with the use of either a multimode cw dye laser or a single-mode ring dye laser followed by a double-passed acousto-optic modulator. Electron-spin polarizations of 0.72 to 0.90 are obtained.
We describe optically pumping a beam of sodium atoms to >96% mS and >92% mS, mI state selection. (We have accurately measured the population of every mS, mI state in the optically pumped beam.) For the optical pumping both ground hyperfine states are pumped, using single-mode cw dye-laser radiation tuned to the 3S1/2–3P1/2 transition that is phase modulated in a LiTaO3 crystal to produce first-order sidebands at approximately the 1772-MHz hyperfine splitting of the ground state. The z-directed optical pumping is performed in a z-directed magnetic field of ~5 G. The state-selected atoms then move, in ~1 cm, into an ~200 G, z-directed field. The downstream probe laser beam is scanned through the 3S1/2 (mS, mI) → 3P3/2 (mS′, mI) transitions, which are spectroscopically resolved at 200 G, and the fluorescence intensities portray the residual populations in each of the eight 3S1/2 states.
We have produced a cesium beam of 10 14 atoms s −1 with more than 98% of the atoms in a single spin state. The beam was polarized by optically pumping it with a single laser diode whose frequency was switched between the 6 s (F = 4)−6 p 3/2 (F = 5) and 6 s (F = 3)−6 p 3/2 (F = 4) transitions at 100 kHz. To do this, it was necessary to determine the frequency modulation characteristics of the laser. The same laser was used to simultaneously probe the atomic population distribution. We find this to be a remarkably simple and inexpensive way to produce a highly spin polarized beam.