This thesis undertakes new investigations with respect to hybrid systems that interacts microwave radiation with spin and phonons. In this work, YSO and YAP samples had their permittivity tensor characterized with YAP subjected to an electron spin resonance spectroscopy. Furthermore, reentrant cavities were explored to promote the interaction of photons with different physical systems. Hence, a piezoelectric controlled cavity was developed and upgraded to a superconducting tunable device, and a parametric transducer based on optomechanical coupling was tested. Finally, an optoacoustic device was built allowing the coupling between photons and phonons in a quartz bulk acoustic wave resonator.
Hardware-efficient methods for high-fidelity quantum state measurements are crucial for superconducting qubit experiments, as qubit numbers grow and feedback and state reset begin to be employed for quantum error correction. We present a three-dimensional reentrant-cavity filter designed for frequency-multiplexed readout of superconducting qubits. The cavity filter is situated out of the plane of the qubit circuit and capacitively couples to an array of on-chip readout resonators in a manner that can scale to large qubit arrays. The reentrant cavity functions as a large-linewidth bandpass filter with intrinsic Purcell filtering. We demonstrate the concept with a four-qubit multiplexed device in which we achieve an average readout fidelity of 98.6% and measurement-induced crosstalk dephasing rates below 0.15 kHz.
We report strong coupling between an ensemble of N impurity
(P1) centers in diamond and microwave photons using a unique double-post reentrant cavity. The cavity is designed so that the magnetic component of the cavity field is spatially separated from the electric component and focused into the small volume in which the diamond sample is mounted. The novelty of the structure simultaneously allows the high magnetic filling factor (38.4%) and low frequencies necessary to interact, at low magnetic field, with transitions in diamond such as those in negatively charged nitrogen-vacancy and
P1 centers. Coupling strength (or normal-mode splitting) of 51.42 MHz was achieved with
P1 centers at 6.18 GHz and 220 mT in a centimeter-scale cavity, with a corresponding cooperativity factor of 4.7. This technique offers an alternative way, with some significant advantages, to couple 3D cavities to transitions in diamond and achieve the strong coupling necessary for applications to quantum information processing.