Ever since Peter Shor's ground-breaking discovery in 1994 of an algorithm capable of factoring large integers on a quantum-mechanical computer exponentially faster than using any known classical method, research on quantum computing has boomed. Quantum information – a unique mixture of computer science, physics and mathematics – has developed into a new branch of information theory. On the experimental side, physicists from many different disciplines including atomic, solid-state and low-temperature physics, as well as optics, are striving today towards a practical quantum computer. All the candidate quantum bit (qubit) technologies have one thing in common: They rely on the controlled time-evolution of a closed quantum system, a seemingly paradoxical task. In this Thesis the temporal control of quantum systems is studied. The topics included can be divided into two according to the type of temporal evolution; geometrical or dynamical. Geometrical realization-independent methods for quantum computing are studied first. Then the study is extended into dynamical quantum computing and the so-called Josephson charge-qubit register is considered as a test bench. Finally, a spin-off application of the geometrical evolution of a Josephson junction system is studied, i.e. Cooper pair pumping. A novel Cooper pair pump, the Cooper pair "sluice", is introduced. The work on quantum computing reported in this Thesis is theoretical while the Cooper pair "sluice" is studied both theoretically and experimentally. Numerical simulations, both sequential and parallel, are used extensively throughout the Thesis. The experiments were carried out under cryogenic mK conditions and the sample fabrication was done using e-beam nanolithography. Because the execution time of a quantum algorithm is always limited by the inevitable process of decoherence, it is important to utilize any measure available for accelerating quantum computations. It is found that practical quantum algorithms could greatly benefit from classical computer-aided optimization. Moreover, it is found that even a modest demonstrator of a full quantum algorithm using Josephson charge qubits is just barely realizable within present-day coherence times. However, the experimental part of this Thesis shows clear evidence of the functioning of the "sluice". While the worldwide effort of improving the coherence properties of qubits is underway, the "sluice" could well find practical use, e.g., in metrology in the foreseeable future.
Ever since Peter Shor's ground-breaking discovery in 1994 of an algorithm capable of factoring large integers on a quantum-mechanical computer exponentially faster than using any known classical method, research on quantum computing has boomed. Quantum information – a unique mixture of computer science, physics and mathematics – has developed into a new branch of information theory. On the experimental side, physicists from many different disciplines including atomic, solid-state and low-temperature physics, as well as optics, are striving today towards a practical quantum computer. All the candidate quantum bit (qubit) technologies have one thing in common: They rely on the controlled time-evolution of a closed quantum system, a seemingly paradoxical task. In this Thesis the temporal control of quantum systems is studied. The topics included can be divided into two according to the type of temporal evolution; geometrical or dynamical. Geometrical realization-independent methods for quantum computing are studied first. Then the study is extended into dynamical quantum computing and the so-called Josephson charge-qubit register is considered as a test bench. Finally, a spin-off application of the geometrical evolution of a Josephson junction system is studied, i.e. Cooper pair pumping. A novel Cooper pair pump, the Cooper pair "sluice", is introduced. The work on quantum computing reported in this Thesis is theoretical while the Cooper pair "sluice" is studied both theoretically and experimentally. Numerical simulations, both sequential and parallel, are used extensively throughout the Thesis. The experiments were carried out under cryogenic mK conditions and the sample fabrication was done using e-beam nanolithography. Because the execution time of a quantum algorithm is always limited by the inevitable process of decoherence, it is important to utilize any measure available for accelerating quantum computations. It is found that practical quantum algorithms could greatly benefit from classical computer-aided optimization. Moreover, it is found that even a modest demonstrator of a full quantum algorithm using Josephson charge qubits is just barely realizable within present-day coherence times. However, the experimental part of this Thesis shows clear evidence of the functioning of the "sluice". While the worldwide effort of improving the coherence properties of qubits is underway, the "sluice" could well find practical use, e.g., in metrology in the foreseeable future.
The concept of a quantum computer was invented in the beginning of the 1980s as a quantum generalization of the reversible classical computer. After discoveries in the middle of the 1990s of quantum algorithms, which wouldsolve some problems considered intractable for classical computers, the field of quantum computing has developed rapidly. A wide range of quantum systems are investigated for their possible ability to implement quantum algorithms in practice. The most promising solid state implementations are superconducting electrical circuits based on the Josephson effect, and the Coulomb blockade effect. Superconducting circuits are macroscopic quantum systems which can be fabricated using standard lithography technologies. Superconducting qubits - basic building blocks of a quantum computer - have been developed at several research laboratories, among others the MC2 here at Chalmers. This thesis presents a theoretical investigation of controllable coupling of superconducting qubits based on the single Cooper-pair box. Two coupling schemes are investigated in detail: current-controlled coupling via large Josephson junctions, and coupling via a superconducting stripline cavity. Both coupling designs are scalable and suitable for the charge regime of the single Cooper-pair box, as well as for the charge-phase regime where the qubit is better protected from environmental noise. Quantum gate protocols which are relevant for these physical couplings are discussed. The investigations show that, for both considered designs, the simplest two-qubit gate is the conditional phase-shift gate. This gate is universal for quantum computing, and it can create maximallyentangled qubit pairs in only one run. The investigation combines methods from electrical engineering, quantum mechanics and quantum computer science.
The last two decades have seen an enormous increase in the computational power of digital computers. This was due to the rapid technical development in manufacturing processes and controlling semiconducting structures on submicron scale. Concurrently, the electric circuits have encountered the first signs of the realm of quantum mechanics. Those effects may induce noise and thus they are typically considered harmful. However, the manipulation of the coherent quantum states might turn out be the basis of powerful computers – quantum computers. There, the computation is encoded into the unitary time evolution of a quantum mechanical state vector. Eventually, quantum mechanics could enable one, for example, to read secret electronic messages which are encrypted by the widely employed RSA cryptosystem – a task which is extremely laborious for the current digital computers. This thesis presents a theoretical study of the coherent manipulations of pure quantum states in a quantum register, that is, quantum algorithms. An implementation of a quantum algorithm involves the initialization of the input state and its manipulation with quantum gates followed by the measurements. The physical implementation of each gate requires that it is decomposed into low-level gates whose physical realizations are explicitly known. Here, the problem is examined from two directions. Firstly, the numerical optimization scheme for controlling time-evolution of a closed quantum system is discussed. This yields a method for implementing quantum gates acting on up to three quantum bits, qubits. The approach is independent of the physical realization of the quantum computer, but it is considered explicitly for a proposed inductively coupled Josephson charge qubit register. Secondly, the techniques of numerical matrix computation are utilized to find a general method for decomposing an arbitrary n-qubit gate into a sequence of elementary gates, which act on one or two qubits. The results of this thesis help to improve the implementation of quantum algorithms. The quantum circuit construction developed in the thesis is the first one to achieve the asymptotically minimal complexity in the number of elementary gates. In context of acceleration of quantum algorithms we present a gate-level study of Shor's algorithm and show how to accelerate the algorithm by merging several elementary gates into multiqubit gates. Finally, the requirements set by the resulting gate array are compared to the properties of superconducting qubits. This allows us to discuss the feasibility of the Josephson charge qubit register, for instance, as hardware for breaking the RSA cryptosystem.
Several physical realizations of quantum bits have been proposed. Of those, nano-electronic devices appear most suitable for large-scale integration and potential applications. We suggest to use low-capacitance Josephson junctions, exploiting the coherence of tunneling in the superconducting state combined with the possibility to control individual charges by Coulomb blockade effects (cond-mat/9706016,cond-mat/9808067). These systems constitute quantum bits, with logical states differing by one Cooper-pair charge. Single- and two-bit operations can be performed by applying a sequence of gate voltages. The phase coherence time is sufficiently long to allow a series of these steps. In addition to the manipulation of qubits the resulting quantum state has to be read out. This can be accomplished by coupling a single-electron transistor capacitively to the qubit (cond-mat/9801125). To describe this quantum measurement process we study the time evolution of the density matrix of the coupled system. Only when a transport voltage is turned on, the transistor destroys the phase coherence of the qubit; in this case within a short time. The measurement is accomplished after a longer time scale, when the signal resolves the different quantum states. At still longer times the measurement process itself destroys the information about the initial state. We present a suitable set of system parameters, which can be realized by present-day technology.
Among the potential physical implementations of quantum bits (qubits) solid state devices appear most promising for large scale applications and integration in electronic circuits. Devices based on low-capacitance Josephson junctions exploit the coherence of the superconducting state, combined with the possibility to control individual charges by Coulomb blockade effects. The logical states in these systems differ by one Cooper-pair charge. Single- and two-bit operations can be performed by applying a sequence of gate voltages. The phase coherence time is sufficiently long to allow a series of these steps. If, in addition, the strength of the Josephson coupling is controlled (e.g. by currents in SQUID loops) the system is ideal for quantum computation. Recent experiments by Nakamura et al. show the feasibility of this approach. In addition to the manipulations of qubits the resulting quantum state has to be read out. This quantum measurement process can be accomplished by coupling a single-electron transistor (SET) capacitively to the qubit. We investigate the process by analyzing the time-evolution of the density matrix of the coupled system. The measurement process is characterized by three time scales: the dephasing time, which is fast when a dissipative current flows in the SET, a longer ‘measurement time’ needed to read out the signal, and a third, even longer ‘mixing time’, characterizing measurement induced transitions which destroy the information about the initial quantum state. The noise spectrum of the current in the SET displays these time scales and allows their direct observation.
Quantum computing holds the promise of solving problems that are intractable for classical computers, with applications ranging from optimization and materials simulation to cryptography. It achieves this by leveraging the exponentially scaling dimensionality of the space encoding quantum information and by executing algorithms on quantum registers in superposition states – a feature often referred to as quantum parallelism. However, while encoding information in computational units capable of exploring a continuous set of quantum states enables exponential scaling of computational power with system size, quantum systems are also more susceptible to errors than their classical counterparts. These errors take the form of both control errors, where miscalibration of the control pulses causes coherent errors on the qubit states, as well as incoherent errors due to energy relaxation and dephasing. Scaling quantum systems to run useful algorithms involving hundreds or thousands of logical qubits will require quantum error correction. In this approach, quantum information is redundantly encoded across an entangled state of many physical qubits. This has enabled experimental demonstrations across various platforms – including ion traps, superconducting circuits, and neutral atoms – showing that encoded quantum states can be preserved beyond the coherence times of the constituting physical qubits. However, quantum state preservation is only one component needed for scalable quantum computing. To execute algorithms, it is also necessary to implement quantum gates on and between encoded qubits, in a way that maintains fault tolerance by preserving the ability to correct errors as they occur during the computation. In the first part of this thesis, we demonstrate the implementation of an error-corrected quantum operation that entangles two logical qubits. This is achieved by performing lattice surgery on a distance-three surface code qubit, resulting in a logical Bell state encoded in distance-three repetition codes, which enable the correction of single bit-flip errors. We further introduce techniques to benchmark and characterize the performance of logical operations, including applying the protocol to arbitrary logical input states and performing logical quantum process tomography. Together, these results constitute one of the first realizations of error-corrected lattice surgery in superconducting circuits. While quantum error correction can correct errors provided they occur with sufficiently low frequency, it may fail when many qubits experience errors simultaneously. In the second part of this thesis, we therefore shift focus to a specific error mechanism known to cause correlated errors in superconducting circuits – quasiparticle-induced decoherence. In this case, various forms of energy deposition on the quantum device can break Cooper pairs into quasiparticles, which may subsequently diffuse to the tunnel junction and interact with the qubit state, thereby causing decoherence. In this thesis, we investigate the impact of quasiparticle tunneling on qubit performance, with a focus on infrared-induced quasiparticles. We compare the sensitivity of niobium-based qubits to those made from tantalum – a material that has gained interest in recent years following demonstrations of qubits with improved coherence times based on this material. Using a thermal radiator source, we show that the performance of tantalum qubits may be limited by infrared-induced quasiparticles in typical superconducting circuit experimental setups. By employing both ambient and in-line infrared filters, we investigate the effectiveness of different filtering strategies and develop best practices for engineering cryogenic environments for superconducting quantum processors. The results presented in this thesis contribute to the advancement of quantum computing based on superconducting circuits by implementing and characterizing quantum error-corrected operations, and by investigating quasiparticles as a source of decoherence, along with strategies to improve infrared filtering and signal conditioning in cryogenic environments for future fault-tolerant quantum computing.
Quantum-state engineering, i.e., active control over the coherent dynamics of suitable quantum-mechanical systems, has become a fascinating prospect of modern physics. With concepts developed in atomic and molecular physics and in the context of NMR, the field has been stimulated further by the perspectives of quantum computation and communication. Low-capacitance Josephson tunneling junctions offer a promising way to realize quantum bits (qubits) for quantum information processing. The article reviews the properties of these devices and the practical and fundamental obstacles to their use. Two kinds of device have been proposed, based on either charge or phase (flux) degrees of freedom. Single- and two-qubit quantum manipulations can be controlled by gate voltages in one case and by magnetic fields in the other case. Both kinds of device can be fabricated with present technology. In flux qubit devices, an important milestone, the observation of superpositions of different flux states in the system eigenstates, has been achieved. The Josephson charge qubit has even demonstrated coherent superpositions of states readable in the time domain. There are two major problems that must be solved before these devices can be used for quantum information processing. One must have a long phase coherence time, which requires that external sources of dephasing be minimized. The review discusses relevant parameters and provides estimates of the decoherence time. Another problem is in the readout of the final state of the system. This issue is illustrated with a possible realization by a single-electron transistor capacitively coupled to the Josephson device, but general properties of measuring devices are also discussed. Finally, the review describes how the basic physical manipulations on an ideal device can be combined to perform useful operations.