Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

AIP conference proceedings

Towards trace detection of [sup 85]Kr by two-step excitation and field ionization

Xinghua Li

Published Jan 1, 2001• 0 citations
Publisher

Abstract

We have implemented a new laser-based detection scheme for the rare krypton isotopes. The scheme utilizes two-step excitation of metastable krypton atoms in a nearly perfect three-level system followed by field ionization. The detection scheme was realized experimentally with a mass-separated atom beam. A total detection efficiency of about 10% is obtained.

DOI
10.1063/1.1405584

Related papers

Atom trap trace analysis of krypton isotopes

K. Bailey, Chen, C. Y., Du, X. +4 more

A new method of ultrasensitive isotope trace analysis has been developed. This method, based on the technique of laser manipulation of neutral atoms, has been used to count individual {sup 85}Kr and {sup 81}Kr atoms present in a natural krypton gas sample with isotopic abundances in the range of 10{sup {minus}11} and 10{sup {minus}13}, respectively. This method is free of contamination from other isotopes and elements and can be applied to several different isotope tracers for a wide range of applications. The demonstrated detection efficiency is 1 x 10{sup {minus}7}. System improvements could increase the efficiency by many orders of magnitude.

•Nov 17, 1999•0 citations

Atom Trap Trace Analysis

Zheng‐Tian Lu

A new method of ultrasensitive trace-isotope analysis has been developed based upon the technique of laser manipulation of neutral atoms. It has been used to count individual {sup 85}Kr and {sup 81}Kr atoms present in a natural krypton sample with isotopic abundances in the range of 10{sup {minus}11} and 10{sup {minus}13}, respectively. The atom counts are free of contamination from other isotopes, elements,or molecules. The method is applicable to other trace-isotopes that can be efficiently captured with a magneto-optical trap, and has a broad range of potential applications.

APS Division of Atomic, Molecular and Optical Physics Meeting Abstracts•May 1, 2011•0 citations

Optical production of metastable krypton

Linda Young, Donghai Yang, R. W. Dunford

We have investigated a new scheme for excitation of the 5s, J = 2 metastable level of Kr (5s[3/2] J = 2 ) which can be readily extended to other rare gases. In the scheme, an ultraviolet (UV) lamp is used to create a population of Kr atoms in the 5s[3/2] J = 1 level in a gas cell. The excited atoms are then pumped to the 5p[3/2] J = 2 level, using 819 nm light from a Ti:sapphire laser, from which they decay to the metastable state with a branching ratio of 77%. We made two striking observations: (1) the laser power required to saturate the second step decreases markedly as a function of gas cell pressure, and (2) the UV photon flux is converted with very high efficiency (≈10%) to metastable atom flux. A Monte Carlo study of the scattering of UV photons in the cell reproduces the trends observed. The understanding achieved points to the design of a higher flux source of metastable atoms.

Journal of Physics B Atomic Molecular and Optical Physics•Jun 25, 2002•25 citations

Resonant isotopic depletion spectroscopy

G. R. Janik, Bruce A. Bushaw, Bret D. Cannon

We have devised a simple new scheme to increase the isotopic selectivity in optical rare-isotope detection experiments. We can effectively remove interfering isotopes from an atomic beam by optically pumping them into a state that is invisible to the optical detection system. The selectivity of this resonant depletion scales exponentially with the isotope shift and yields almost unlimited selectivity in principle. We have demonstrated a selectivity of 2.3 x 10(5) with a single laser excitation in a beam of metastable krypton atoms. With better laser stability we may be able to improve the selectivity much further.

Optics Letters•Jan 15, 1989•8 citations

Thermal beam of metastable krypton atoms produced by optical excitation

Yue Ding, Shui-Ming Hu, K. Bailey +5 more

A room-temperature beam of krypton atoms in the metastable 5s[3/2]2 level is demonstrated via an optical excitation method. A Kr-discharge lamp is used to produce vacuum ultraviolet photons at 124 nm for the first-step excitation from the ground level 4p6 1S0 to the 5s[3/2]1 level. An 819 nm Ti:sapphire laser is used for the second-step excitation from 5s[3/2]1 to 5s[3/2]2 followed by a spontaneous decay to the 5s[3/2]2 metastable level. A metastable atomic beam with an angular flux density of 3 x 10(14) s(-1) sr(-1) is achieved at the total gas flow rate of 0.01 cm3/s at STP (or 3 x 10(17) at./s). The dependences of the flux on the gas flow rate, laser power, and lamp parameters are investigated.

arXiv:physics/0612046•Review of Scientific Instruments•Feb 1, 2007•22 citations

Towards Purely Laser Based Generation and Trapping of Metastable Krypton

M. Abou Dakka

Radioisotopes that break down at a constant rate over time through radioactive decay allow scientists to understand the development of geological and anthropological history by dating samples that contain such isotopes. While many techniques exist to measure the age of a sample, in this thesis we explore the possibility of enhancing the atom trap trace analysis (ATTA) method, which has made significant strides in the area of ultra-sensitive radioisotope detection, especially with the use of metastable noble gas radionuclides. A metastable atom is an atom in a stable, long-lived (>1 ms) excited state. Noble gases have the longest metastable lifetimes, which combined with their geochemical inertness, make them ideal candidates for geological and environmental radiometric techniques. The production of metastable noble gases for this purpose has traditionally relied on discharge sources, but this method suffers from important drawbacks such as high levels of crosscontamination and poor excitation efficiencies. In an effort to overcome these drawbacks, the method described in this work presents a new platform for implementing, characterising and comparing purely laser-based production of metastable noble gases. In the first part of this thesis, we present both state-of-the-art experimental results in the purely laser-based generation of metastable krypton atoms, and a physically realistic simulation with good agreement with our experimental results. Our calculation of the twophoton absorption cross section for krypton (to a metastable-generating excited state) using 215nm deep ultraviolet (DUV) laser radiation, obtained by fitting with theory, confirms that high metastable production efficiencies are possible with laser-based techniques. In addition to this parameter, the branching ratio and photoionisation rate from the excited state are calculated and agree with the literature. In the second part, we present the experimental progress to date for a brand new method of manipulating metastable noble gas atoms using a two-stage approach of metastable production then trapping via a magneto-optical trap (MOT). While the results are limited due to experimental difficulties, they are complemented by a physically realistic 3D simulation based on the Monte Carlo method. This simulation suggests that the production and trapping of metastable noble gases is feasible without the use of a discharge source, a Zeeman slower, and even a secondary excitation chamber. However, the loading rate for such a MOT is not sufficient for ATTA measurements without drastic changes in the experimental configuration. In the final part, we propose a next-generation ATTA system based on stimulated rapid adiabatic passage (STIRAP) to transfer noble gas atoms to their metastable state with near 100% efficiency. This technique for the generation of metastable noble gases would be purely laser-based and would compete with the loading rates of conventional production techniques, while avoiding their deleterious effects. We conclude by identifying limits of laser-based techniques and explore approaches to overcome them.

•Jan 1, 2019•0 citations
We have implemented a new laser-based detection scheme for the rare krypton isotopes. The scheme utilizes two-step excitation of metastable krypton atoms in a nearly perfect three-level system followed by field ionization. The detection scheme was realized experimentally with a mass-separated atom beam. A total detection efficiency of about 10% is obtained.
A new method of ultrasensitive isotope trace analysis has been developed. This method, based on the technique of laser manipulation of neutral atoms, has been used to count individual {sup 85}Kr and {sup 81}Kr atoms present in a natural krypton gas sample with isotopic abundances in the range of 10{sup {minus}11} and 10{sup {minus}13}, respectively. This method is free of contamination from other isotopes and elements and can be applied to several different isotope tracers for a wide range of applications. The demonstrated detection efficiency is 1 x 10{sup {minus}7}. System improvements could increase the efficiency by many orders of magnitude.
A new method of ultrasensitive trace-isotope analysis has been developed based upon the technique of laser manipulation of neutral atoms. It has been used to count individual {sup 85}Kr and {sup 81}Kr atoms present in a natural krypton sample with isotopic abundances in the range of 10{sup {minus}11} and 10{sup {minus}13}, respectively. The atom counts are free of contamination from other isotopes, elements,or molecules. The method is applicable to other trace-isotopes that can be efficiently captured with a magneto-optical trap, and has a broad range of potential applications.
We have investigated a new scheme for excitation of the 5s, J = 2 metastable level of Kr (5s[3/2] J = 2 ) which can be readily extended to other rare gases. In the scheme, an ultraviolet (UV) lamp is used to create a population of Kr atoms in the 5s[3/2] J = 1 level in a gas cell. The excited atoms are then pumped to the 5p[3/2] J = 2 level, using 819 nm light from a Ti:sapphire laser, from which they decay to the metastable state with a branching ratio of 77%. We made two striking observations: (1) the laser power required to saturate the second step decreases markedly as a function of gas cell pressure, and (2) the UV photon flux is converted with very high efficiency (≈10%) to metastable atom flux. A Monte Carlo study of the scattering of UV photons in the cell reproduces the trends observed. The understanding achieved points to the design of a higher flux source of metastable atoms.
We have devised a simple new scheme to increase the isotopic selectivity in optical rare-isotope detection experiments. We can effectively remove interfering isotopes from an atomic beam by optically pumping them into a state that is invisible to the optical detection system. The selectivity of this resonant depletion scales exponentially with the isotope shift and yields almost unlimited selectivity in principle. We have demonstrated a selectivity of 2.3 x 10(5) with a single laser excitation in a beam of metastable krypton atoms. With better laser stability we may be able to improve the selectivity much further.
A room-temperature beam of krypton atoms in the metastable 5s[3/2]2 level is demonstrated via an optical excitation method. A Kr-discharge lamp is used to produce vacuum ultraviolet photons at 124 nm for the first-step excitation from the ground level 4p6 1S0 to the 5s[3/2]1 level. An 819 nm Ti:sapphire laser is used for the second-step excitation from 5s[3/2]1 to 5s[3/2]2 followed by a spontaneous decay to the 5s[3/2]2 metastable level. A metastable atomic beam with an angular flux density of 3 x 10(14) s(-1) sr(-1) is achieved at the total gas flow rate of 0.01 cm3/s at STP (or 3 x 10(17) at./s). The dependences of the flux on the gas flow rate, laser power, and lamp parameters are investigated.
Radioisotopes that break down at a constant rate over time through radioactive decay allow scientists to understand the development of geological and anthropological history by dating samples that contain such isotopes. While many techniques exist to measure the age of a sample, in this thesis we explore the possibility of enhancing the atom trap trace analysis (ATTA) method, which has made significant strides in the area of ultra-sensitive radioisotope detection, especially with the use of metastable noble gas radionuclides. A metastable atom is an atom in a stable, long-lived (>1 ms) excited state. Noble gases have the longest metastable lifetimes, which combined with their geochemical inertness, make them ideal candidates for geological and environmental radiometric techniques. The production of metastable noble gases for this purpose has traditionally relied on discharge sources, but this method suffers from important drawbacks such as high levels of crosscontamination and poor excitation efficiencies. In an effort to overcome these drawbacks, the method described in this work presents a new platform for implementing, characterising and comparing purely laser-based production of metastable noble gases. In the first part of this thesis, we present both state-of-the-art experimental results in the purely laser-based generation of metastable krypton atoms, and a physically realistic simulation with good agreement with our experimental results. Our calculation of the twophoton absorption cross section for krypton (to a metastable-generating excited state) using 215nm deep ultraviolet (DUV) laser radiation, obtained by fitting with theory, confirms that high metastable production efficiencies are possible with laser-based techniques. In addition to this parameter, the branching ratio and photoionisation rate from the excited state are calculated and agree with the literature. In the second part, we present the experimental progress to date for a brand new method of manipulating metastable noble gas atoms using a two-stage approach of metastable production then trapping via a magneto-optical trap (MOT). While the results are limited due to experimental difficulties, they are complemented by a physically realistic 3D simulation based on the Monte Carlo method. This simulation suggests that the production and trapping of metastable noble gases is feasible without the use of a discharge source, a Zeeman slower, and even a secondary excitation chamber. However, the loading rate for such a MOT is not sufficient for ATTA measurements without drastic changes in the experimental configuration. In the final part, we propose a next-generation ATTA system based on stimulated rapid adiabatic passage (STIRAP) to transfer noble gas atoms to their metastable state with near 100% efficiency. This technique for the generation of metastable noble gases would be purely laser-based and would compete with the loading rates of conventional production techniques, while avoiding their deleterious effects. We conclude by identifying limits of laser-based techniques and explore approaches to overcome them.