Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Physical layer security scheme based on power efficient multi-antenna transmitter

Paulo Montezuma, Rui Dinis, Mário Marques da Silva

Published Jan 1, 2015• 0 citations
OpenAlex

Abstract

Security is a demanding challenge in wireless systems due to the broadcast nature of the channel. One the other hand security at physical layer can increase overall system's security since it can be combined with other security schemes from higher layers. High throughput required by modern wireless networks can be assured by MIMO (Multiple-input multiple-output), but when high spectral e-ciencies are needed multilevel modulations with high peak-to-average power ratios should be used, which may afiect e-ciency of power ampliflcation. This problem can be avoided by the MISO (Multi input Single Output) transmitter considered here, where transmitted multilevel constellations are the result of the combination of several uncorrelated BPSK (Bi-Phase Shift Keying) components, that are amplifled and transmitted independently by an antenna. The constellation shaping done by this transmitter means directivity in the transmitted constellation that can be used to assure security at physical layer. Security as well complexity are assured since any eavesdropper must know the set of coe-cients associated to each BPSK component as well as the antenna array conflguration. It is shown that the inherent security assured by this transmitter allows secrecy at physical layer. Several examples are analyzed and the corresponding results show the efiectiveness of the proposed approach to implement a security scheme at physical layer level.

Related papers

A MIMO Optimization for Physical Layer Security

Mário Marques da Silva

The use of multiple antennas at both the transmitter and receiver aims to improve performance or to increase symbol rate of systems, but it usually requires higher implementation complexity. Multiple Input Multiple Output (MIMO) architectures can be used for combined transmit and receive diversity, for the parallel transmission of data or spatial multiplexing. When used for spatial multiplexing, MIMO technology promises high bit rates in a narrow bandwidth. Therefore, it is of high significance to spectrum users. In this case, MIMO system considers the transmission of different signals from each transmit element so that the receiving antenna array receives a superposition of all transmitted signals. Mobile communication systems must support multiple users achieving at the same time privacy of users contents. Security common solutions are based on encrypted algorithms from higher layers, such as private and public encrypted keys. Other possibility is to implement physical layer security schemes. One advantage of physical layer security relies on their ability to be combined with other security schemes from higher layers. Due to the broadcast nature of MIMO systems, security is a critical issue. However, the constellation shaping on the desired direction introduced by a new proposed transmitter means that we have directivity at the transmitted constellation that can be employed to assure security at physical layer. Privacy is achieved since each user must know the set of coefficients associated to each BPSK component as well as the array configuration; otherwise receives useless data. Therefore, the inherent security lies on the constellation directivity, i.e., the direction in which the constellation is optimized, which can be improved by changes on coefficients’ phases or using constellations that are decomposed with a higher number of BPSK components. The several cases analyzed in this speech show effectiveness of the proposed approach to implement a security scheme at physical layer level.

International Journal of Sensor Networks and Data Communications•Apr 28, 2016•0 citations

Secure multi-antenna transmission with finite-alphabet signaling

Sina Rezaei Aghdam

With the ever-growing demand for services that rely on transmission over wireless networks, a challenging issue is the security of the transmitted information. Due to its open nature, wireless communications is prone to eavesdropping attacks. Typically, secrecy of the transmitted information is ensured with the aid of cryptographic techniques, which are deployed on upper layers of the network protocol stack. However, due to the need for key distribution and management, cryptographic solutions are difficult to implement in decentralized networks. Moreover, the security provided by key based solutions is not provable from a mathematical point of view. Physical layer security is an alternative or complement to the cryptographic techniques, which can resolve the complexities associated with key distribution and management. The basic principle of physical layer security is to exploit the randomness of the communication channels to allow a transmitter deliver its message to an intended receiver reliably while guaranteeing that a third party cannot infer any information about it. Much of the existing research in physical layer security focuses on investigating the information theoretic limits of secure communications. Among different techniques proposed, multiple-antenna based solutions have been shown to exhibit a high potential for enhancing security. Furthermore, Gaussian inputs are proved to be the optimal input distributions in a variety of scenarios. However, due to the high detection complexity, Gaussian signaling is not used in practice, and the transmission is carried out with the aid of symbols drawn from standard signal constellations. In this thesis, we develop several secure multi-antenna transmission techniques under the practical finite-alphabet input assumption. We first consider multipleinput multiple-output (MIMO) wiretap channels under finite-alphabet input constraints. We assume that the statistical channel state information (CSI) of the eavesdropper is available at the transmitter, and study two different scenarios regarding the transmitter's knowledge on the main channel CSI (MCSI) including availability of perfect and statistical MCSI at the transmitter. In each scenario, we introduce iterative algorithms for joint optimization of data precoder and arti ficial noise. We also propose different strategies to reduce the computational complexity associated with the transmit signal design. Moreover, we consider the setups with simultaneous wireless information and power transfer (SWIPT), and propose transmission schemes for achieving the trade-off between the secrecy rate and the harvested power. We demonstrate the efficacy of the proposed transmit signal design algorithms via extensive numerical examples. We also introduce several secure transmission schemes with spatial modulation and space shift keying (SSK). We derive an expression for the achievable secrecy rate, and develop precoder optimization algorithms for its maximization using transmitter side CSI. Furthermore, we introduce a group of secure SSK transmission schemes, which rely on dynamic antenna index assignment over reciprocal channels. Our results reveal that the fundamentally different working principle of SSK opens up new avenues for secure multi-antenna transmission.

•Jan 1, 2018•1 citation

MIMO Signal Processing Algorithms for Enhanced Physical Layer Security

Xiangyun Zhou, Lingyang Song, Yan Zhang

The use of physical layer methods for improving the security of wireless links has recently become the focus of a considerable research effort. Such methods can be used in combination with cryptography to enhance the exchange of confidential messages over a wireless medium in the presence of unauthorized eavesdroppers, or they can be used to enable secrecy in the absence of shared secret keys through the use of coding strategies, jamming or beamforming. Indeed, one of the driving forces behind the recent emergence of physical layer techniques for security is the push toward adding extra degrees of freedom in the form of multiple antennas at the transmitter and receiver of the link. Multiple-input multiple-output (MIMO) wireless systems have been extensively studied during the past two decades, and their potential gains in throughput, diversity, and range have been well quantified. MIMO approaches are now an integral part of the WiFi and 4G standards in use today. It is not surprising that MIMO architectures are useful in improving wireless security as well, since they can provide focused transmit selectivity of both information and noise toward desired and undesired receivers. In this chapter, we discuss a number of different ways that physical layer security can be achieved in wireless networks with MIMO links. We will focus primarily on signal processing related issues (e.g., beamforming, power control, resource allocation) that enable reliable reception at intended recipients and minimize data leakage to eavesdroppers, and we will consider a variety of different MIMO settings including point-to-point, broadcast, interference, and multi-hop networks. We cannot offer an exhaustive survey of such methods in just a single chapter; instead, we present a few representative approaches that illustrate ✐ ✐ — — ✐ ✐ ✐ ✐ ✐ ✐ Physical Layer Security in Wireless the gains that multiple antennas provide. Additional and more complete treatments of the physical layer security problem can be found in [1-4] as well as other chapters in this book.

CRC Press eBooks•Nov 7, 2013•2 citations

Physical Layer Secure MIMO Communications Against Eavesdroppers With Arbitrary Number of Antennas

Jie Tang, Long Jiao, Kai Zeng +2 more

Recently, MIMO (multiple-input-multiple-output) physical layer secure transmission has attracted great attentions. However, current schemes cannot defend against the passive eavesdroppers with arbitrary number of antennas. To address this problem, in this work, we propose a practical physical layer MIMO secure communication scheme (PLSC) to defend against such an eavesdropper with arbitrary number of antennas. In the proposed scheme, the transmitter first independently generates a random binary sequence as the “key bits (KB)” to “encrypt” (XOR) the confidential information. After that, the transmitter sends the “encrypted information” over the wireless channel, along with mapping key bits to the legitimate receiver simultaneously. The key principle lies in that the KB information is coded in the indexes of the activated/non-activated antennas combination of the legitimate user. Then, the legitimate receiver first observes his/her activated antenna indexes to obtain the corresponding key bits. After that, he/she demodulates the “encrypted information” at the activated antennas, and finally “decrypts” (XOR) the confidential information by using the observed key bits. However, due to the uniqueness and independence of MIMO wireless channel, for any other eavesdroppers who suffer an independent channel from legitimate users, we prove that it cannot observe any information about KB from the received signals, regardless of how many antennas it has used. Consequently, without knowledge of KB, it cannot decrypt any information about the confidential information, too. The reliability and security of PLSC are theoretically demonstrated. The simulation and numerical results fully verified the validity and effectiveness of the proposed scheme.

IEEE Transactions on Information Forensics and Security•Aug 11, 2020•35 citations

Physical layer security in emerging wireless communication systems

Wei Wang

Security has become an increasingly significant and urgent issue in wireless networks. The growing computational capability of the eavesdropper (Eve) and more and more complicated secure key management in large scale and heterogeneous networks, pose more and more stringent requirement to the cryptographic protocols. As a new design paradigm, physical layer security has been recognised as a promising solution to enhance the security of wireless links relying on the channel properties and advanced signal processing, and can act as either an alternative or a complementary solution to the conventional cryptographic methods. Without complicated secure key generation and management, physical layer security is quite suitable for the large scale distributed networks. In this thesis, we aim to improve the secrecy performance in emerging wireless communication systems relying on different physical layer security techniques. Firstly, the security of an amplify-and-forward successive relaying network with multiple untrusted relay nodes is investigated, where the conventional detrimental inter-relay interference is exploited to jam the untrusted nodes without assistance of external helpers. Considering different complexity requirements, several relay selection schemes are proposed, and the closed-form expressions of the lower bound of the secrecy outage probability and the maximum secrecy diversity order are derived accordingly. It is shown that the maximum secrecy diversity order of N-1 can be achieved for an N relay nodes network. Secondly, the artificial noise (AN) aided secure transmission strategy for a multiple-input single-output multiple-Eve (MISOME) system with a secure user (Bob) and a normal user (NU) is investigated. The power allocations among Bob, NU and AN, as well as the wiretap code rates, are jointly optimized to maximize the effective secrecy throughput (EST), under the average throughput constraint of NU. An alternative optimization algorithm with guaranteed convergence is proposed to obtain the optimal parameters. It is shown that the EST increases with the transmitting power and the number of transmit antennas, and decreases with the throughput constraint of NU, and the EST can be improved through injecting AN and concurrent transmission of Bob and NU. Thirdly, physical layer security in a multi-antenna small-cell network is investigated, where the multi-antenna base stations (BSs), cellular users, and Eves are all randomly distributed according to independent Poisson point processes. Stochastic geometry is applied to analyze the connection and secrecy outage probabilities and the average achievable secrecy rate. The impact of different parameters, including power allocation, BS and Eve density, and the adaptive eavesdropping or jamming on the secrecy performance is analyzed. It is shown that the average secrecy rate is a quasi-concave function of the power allocation factor and monotonically decreases with the ratio of the Eve-BS density. Finally, we study the physical layer security in a large-scale heterogeneous network consisting of both sub-6 GHz massive multi-input multi-output (MIMO) macro cells and millimeter wave (mmWave) small cells. By considering pilot spoofing attacks from the Eves, the coverage and secrecy probabilities are derived using stochastic geometry and the conditions under which the millimeter wave tier outperforms the sub-6 GHz counterpart are discussed in terms of both coverage and secrecy.It is shown that the mmWave small cell can provide better coverage performance in the high transmission code-rate region, and the secrecy performance of the mmWave system outperforms the sub-6 GHz counterpart in the low redundant rate region, which reveals the advantage of using mmWave for secure communication.

•Jan 1, 2018•0 citations

Physical-Layer Security over Generalized SIMO Multipath Fading Channels

Jules Merlin Moualeu, Paschalis C. Sofotasios, Daniel Benevides da Costa +3 more

The present work investigates the physical layer security of wireless communication systems over non-homogeneous fading environments, which are typically encountered in realistic wireless transmission scenarios in the context of conventional and emerging communication systems. This is carried out in the context of a single-input multiple-output system that consists of a single-antenna transmitter, a multi-antenna legitimate receiver, and a multi-antenna active eavesdropper. To this end, novel exact analytic expressions are derived for the corresponding average secrecy capacity, which are corroborated by respective results from computer simulations that verify their validity. Capitalizing on the offered results, the physical layer security is quantified in terms of different parameters. This leads to the development of useful insights on the impact of non-homogeneous fading environment and the number of employed antennas on the achieved physical layer security levels of the considered set up.

International Conference on Advanced Communication Technologies and Networking (CommNet)•Apr 1, 2019•6 citations
Security is a demanding challenge in wireless systems due to the broadcast nature of the channel. One the other hand security at physical layer can increase overall system's security since it can be combined with other security schemes from higher layers. High throughput required by modern wireless networks can be assured by MIMO (Multiple-input multiple-output), but when high spectral e-ciencies are needed multilevel modulations with high peak-to-average power ratios should be used, which may afiect e-ciency of power ampliflcation. This problem can be avoided by the MISO (Multi input Single Output) transmitter considered here, where transmitted multilevel constellations are the result of the combination of several uncorrelated BPSK (Bi-Phase Shift Keying) components, that are amplifled and transmitted independently by an antenna. The constellation shaping done by this transmitter means directivity in the transmitted constellation that can be used to assure security at physical layer. Security as well complexity are assured since any eavesdropper must know the set of coe-cients associated to each BPSK component as well as the antenna array conflguration. It is shown that the inherent security assured by this transmitter allows secrecy at physical layer. Several examples are analyzed and the corresponding results show the efiectiveness of the proposed approach to implement a security scheme at physical layer level.
The use of multiple antennas at both the transmitter and receiver aims to improve performance or to increase symbol rate of systems, but it usually requires higher implementation complexity. Multiple Input Multiple Output (MIMO) architectures can be used for combined transmit and receive diversity, for the parallel transmission of data or spatial multiplexing. When used for spatial multiplexing, MIMO technology promises high bit rates in a narrow bandwidth. Therefore, it is of high significance to spectrum users. In this case, MIMO system considers the transmission of different signals from each transmit element so that the receiving antenna array receives a superposition of all transmitted signals. Mobile communication systems must support multiple users achieving at the same time privacy of users contents. Security common solutions are based on encrypted algorithms from higher layers, such as private and public encrypted keys. Other possibility is to implement physical layer security schemes. One advantage of physical layer security relies on their ability to be combined with other security schemes from higher layers. Due to the broadcast nature of MIMO systems, security is a critical issue. However, the constellation shaping on the desired direction introduced by a new proposed transmitter means that we have directivity at the transmitted constellation that can be employed to assure security at physical layer. Privacy is achieved since each user must know the set of coefficients associated to each BPSK component as well as the array configuration; otherwise receives useless data. Therefore, the inherent security lies on the constellation directivity, i.e., the direction in which the constellation is optimized, which can be improved by changes on coefficients’ phases or using constellations that are decomposed with a higher number of BPSK components. The several cases analyzed in this speech show effectiveness of the proposed approach to implement a security scheme at physical layer level.
With the ever-growing demand for services that rely on transmission over wireless networks, a challenging issue is the security of the transmitted information. Due to its open nature, wireless communications is prone to eavesdropping attacks. Typically, secrecy of the transmitted information is ensured with the aid of cryptographic techniques, which are deployed on upper layers of the network protocol stack. However, due to the need for key distribution and management, cryptographic solutions are difficult to implement in decentralized networks. Moreover, the security provided by key based solutions is not provable from a mathematical point of view. Physical layer security is an alternative or complement to the cryptographic techniques, which can resolve the complexities associated with key distribution and management. The basic principle of physical layer security is to exploit the randomness of the communication channels to allow a transmitter deliver its message to an intended receiver reliably while guaranteeing that a third party cannot infer any information about it. Much of the existing research in physical layer security focuses on investigating the information theoretic limits of secure communications. Among different techniques proposed, multiple-antenna based solutions have been shown to exhibit a high potential for enhancing security. Furthermore, Gaussian inputs are proved to be the optimal input distributions in a variety of scenarios. However, due to the high detection complexity, Gaussian signaling is not used in practice, and the transmission is carried out with the aid of symbols drawn from standard signal constellations. In this thesis, we develop several secure multi-antenna transmission techniques under the practical finite-alphabet input assumption. We first consider multipleinput multiple-output (MIMO) wiretap channels under finite-alphabet input constraints. We assume that the statistical channel state information (CSI) of the eavesdropper is available at the transmitter, and study two different scenarios regarding the transmitter's knowledge on the main channel CSI (MCSI) including availability of perfect and statistical MCSI at the transmitter. In each scenario, we introduce iterative algorithms for joint optimization of data precoder and arti ficial noise. We also propose different strategies to reduce the computational complexity associated with the transmit signal design. Moreover, we consider the setups with simultaneous wireless information and power transfer (SWIPT), and propose transmission schemes for achieving the trade-off between the secrecy rate and the harvested power. We demonstrate the efficacy of the proposed transmit signal design algorithms via extensive numerical examples. We also introduce several secure transmission schemes with spatial modulation and space shift keying (SSK). We derive an expression for the achievable secrecy rate, and develop precoder optimization algorithms for its maximization using transmitter side CSI. Furthermore, we introduce a group of secure SSK transmission schemes, which rely on dynamic antenna index assignment over reciprocal channels. Our results reveal that the fundamentally different working principle of SSK opens up new avenues for secure multi-antenna transmission.
The use of physical layer methods for improving the security of wireless links has recently become the focus of a considerable research effort. Such methods can be used in combination with cryptography to enhance the exchange of confidential messages over a wireless medium in the presence of unauthorized eavesdroppers, or they can be used to enable secrecy in the absence of shared secret keys through the use of coding strategies, jamming or beamforming. Indeed, one of the driving forces behind the recent emergence of physical layer techniques for security is the push toward adding extra degrees of freedom in the form of multiple antennas at the transmitter and receiver of the link. Multiple-input multiple-output (MIMO) wireless systems have been extensively studied during the past two decades, and their potential gains in throughput, diversity, and range have been well quantified. MIMO approaches are now an integral part of the WiFi and 4G standards in use today. It is not surprising that MIMO architectures are useful in improving wireless security as well, since they can provide focused transmit selectivity of both information and noise toward desired and undesired receivers. In this chapter, we discuss a number of different ways that physical layer security can be achieved in wireless networks with MIMO links. We will focus primarily on signal processing related issues (e.g., beamforming, power control, resource allocation) that enable reliable reception at intended recipients and minimize data leakage to eavesdroppers, and we will consider a variety of different MIMO settings including point-to-point, broadcast, interference, and multi-hop networks. We cannot offer an exhaustive survey of such methods in just a single chapter; instead, we present a few representative approaches that illustrate ✐ ✐ — — ✐ ✐ ✐ ✐ ✐ ✐ Physical Layer Security in Wireless the gains that multiple antennas provide. Additional and more complete treatments of the physical layer security problem can be found in [1-4] as well as other chapters in this book.
Recently, MIMO (multiple-input-multiple-output) physical layer secure transmission has attracted great attentions. However, current schemes cannot defend against the passive eavesdroppers with arbitrary number of antennas. To address this problem, in this work, we propose a practical physical layer MIMO secure communication scheme (PLSC) to defend against such an eavesdropper with arbitrary number of antennas. In the proposed scheme, the transmitter first independently generates a random binary sequence as the “key bits (KB)” to “encrypt” (XOR) the confidential information. After that, the transmitter sends the “encrypted information” over the wireless channel, along with mapping key bits to the legitimate receiver simultaneously. The key principle lies in that the KB information is coded in the indexes of the activated/non-activated antennas combination of the legitimate user. Then, the legitimate receiver first observes his/her activated antenna indexes to obtain the corresponding key bits. After that, he/she demodulates the “encrypted information” at the activated antennas, and finally “decrypts” (XOR) the confidential information by using the observed key bits. However, due to the uniqueness and independence of MIMO wireless channel, for any other eavesdroppers who suffer an independent channel from legitimate users, we prove that it cannot observe any information about KB from the received signals, regardless of how many antennas it has used. Consequently, without knowledge of KB, it cannot decrypt any information about the confidential information, too. The reliability and security of PLSC are theoretically demonstrated. The simulation and numerical results fully verified the validity and effectiveness of the proposed scheme.
Security has become an increasingly significant and urgent issue in wireless networks. The growing computational capability of the eavesdropper (Eve) and more and more complicated secure key management in large scale and heterogeneous networks, pose more and more stringent requirement to the cryptographic protocols. As a new design paradigm, physical layer security has been recognised as a promising solution to enhance the security of wireless links relying on the channel properties and advanced signal processing, and can act as either an alternative or a complementary solution to the conventional cryptographic methods. Without complicated secure key generation and management, physical layer security is quite suitable for the large scale distributed networks. In this thesis, we aim to improve the secrecy performance in emerging wireless communication systems relying on different physical layer security techniques. Firstly, the security of an amplify-and-forward successive relaying network with multiple untrusted relay nodes is investigated, where the conventional detrimental inter-relay interference is exploited to jam the untrusted nodes without assistance of external helpers. Considering different complexity requirements, several relay selection schemes are proposed, and the closed-form expressions of the lower bound of the secrecy outage probability and the maximum secrecy diversity order are derived accordingly. It is shown that the maximum secrecy diversity order of N-1 can be achieved for an N relay nodes network. Secondly, the artificial noise (AN) aided secure transmission strategy for a multiple-input single-output multiple-Eve (MISOME) system with a secure user (Bob) and a normal user (NU) is investigated. The power allocations among Bob, NU and AN, as well as the wiretap code rates, are jointly optimized to maximize the effective secrecy throughput (EST), under the average throughput constraint of NU. An alternative optimization algorithm with guaranteed convergence is proposed to obtain the optimal parameters. It is shown that the EST increases with the transmitting power and the number of transmit antennas, and decreases with the throughput constraint of NU, and the EST can be improved through injecting AN and concurrent transmission of Bob and NU. Thirdly, physical layer security in a multi-antenna small-cell network is investigated, where the multi-antenna base stations (BSs), cellular users, and Eves are all randomly distributed according to independent Poisson point processes. Stochastic geometry is applied to analyze the connection and secrecy outage probabilities and the average achievable secrecy rate. The impact of different parameters, including power allocation, BS and Eve density, and the adaptive eavesdropping or jamming on the secrecy performance is analyzed. It is shown that the average secrecy rate is a quasi-concave function of the power allocation factor and monotonically decreases with the ratio of the Eve-BS density. Finally, we study the physical layer security in a large-scale heterogeneous network consisting of both sub-6 GHz massive multi-input multi-output (MIMO) macro cells and millimeter wave (mmWave) small cells. By considering pilot spoofing attacks from the Eves, the coverage and secrecy probabilities are derived using stochastic geometry and the conditions under which the millimeter wave tier outperforms the sub-6 GHz counterpart are discussed in terms of both coverage and secrecy.It is shown that the mmWave small cell can provide better coverage performance in the high transmission code-rate region, and the secrecy performance of the mmWave system outperforms the sub-6 GHz counterpart in the low redundant rate region, which reveals the advantage of using mmWave for secure communication.
The present work investigates the physical layer security of wireless communication systems over non-homogeneous fading environments, which are typically encountered in realistic wireless transmission scenarios in the context of conventional and emerging communication systems. This is carried out in the context of a single-input multiple-output system that consists of a single-antenna transmitter, a multi-antenna legitimate receiver, and a multi-antenna active eavesdropper. To this end, novel exact analytic expressions are derived for the corresponding average secrecy capacity, which are corroborated by respective results from computer simulations that verify their validity. Capitalizing on the offered results, the physical layer security is quantified in terms of different parameters. This leads to the development of useful insights on the impact of non-homogeneous fading environment and the number of employed antennas on the achieved physical layer security levels of the considered set up.