Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE Transactions on Applied Superconductivity

Vacuum Gap Microstrip Microwave Resonators for 2.5-D Integration in Quantum Computing

Rupert Lewis, Michael David Henry, Katlin M. Schroeder

Published Feb 24, 2017• 2 citations
Publisher

Abstract

Vacuum gap λ/2 microwave resonators are demonstrated as a route toward higher integration in superconducting qubit circuits. The resonators are fabricated from pieces on two silicon chips bonded together with an In-Sb bond. Measurements of the devices yield resonant frequencies in good agreement with simulations. Creating low loss circuits in this geometry is also discussed.

DOI
10.1109/tasc.2017.2672719

Related papers

Low-loss superconducting resonant circuits using vacuum-gap-based microwave components

Katarina Cicak, Dale Li, Joshua Strong +6 more

We have produced high-quality complex microwave circuits, such as multiplexed resonators and superconducting phase qubits, using a “vacuum-gap” technology that eliminates lossy dielectric materials. We have improved our design and fabrication strategy beyond our earlier work, leading to increased yield, enabling the realization of these complex circuits. We incorporate both novel vacuum-gap wiring crossovers for gradiometric inductors and vacuum-gap capacitors (VGC) on chip to produce resonant circuits that have large internal quality factors (30 000<QI<165 000) at 50 mK, outperforming most dielectric-filled devices. Resonators with VGCs as large as 180 pF confirm single mode behavior of our lumped-element components.

arXiv:0910.5252•Applied Physics Letters•Mar 1, 2010•68 citations

Making high-quality quantum microwave devices with van der Waals superconductors

Abhinandan Antony, M. Gustafsson, Anjaly Rajendran +5 more

Abstract Ultra low-loss microwave materials are crucial for enhancing quantum coherence and scalability of superconducting qubits. Van der Waals (vdW) heterostructure is an attractive platform for quantum devices due to the single-crystal structure of the constituent two-dimensional (2D) layered materials and the lack of dangling bonds at their atomically sharp interfaces. However, new fabrication and characterization techniques are required to determine whether these structures can achieve low loss in the microwave regime. Here we report the fabrication of superconducting microwave resonators using NbSe2 that achieve a quality factor Q > 105. This value sets an upper bound that corresponds to a resistance of ⩽ 192 μ Ω when considering the additional loss introduced by integrating NbSe2 into a standard transmon circuit. This work demonstrates the compatibility of 2D layered materials with high-quality microwave quantum devices.

arXiv:2107.09147•Journal of Physics Condensed Matter•Nov 30, 2021•10 citations

Demonstration of superconducting micromachined cavities

T. Brecht, Matthew J. Reagor, Yiwen Chu +5 more

Superconducting enclosures will be key components of scalable quantum computing devices based on circuit quantum electrodynamics. Within a densely integrated device, they can protect qubits from noise and serve as quantum memory units. Whether constructed by machining bulk pieces of metal or microfabricating wafers, 3D enclosures are typically assembled from two or more parts. The resulting seams potentially dissipate crossing currents and limit performance. In this letter, we present measured quality factors of superconducting cavity resonators of several materials, dimensions, and seam locations. We observe that superconducting indium can be a low-loss RF conductor and form low-loss seams. Leveraging this, we create a superconducting micromachined resonator with indium that has a quality factor of two million, despite a greatly reduced mode volume. Inter-layer coupling to this type of resonator is achieved by an aperture located under a planar transmission line. The described techniques demonstrate a proof-of-principle for multilayer microwave integrated quantum circuits for scalable quantum computing.

arXiv:1509.01119•Applied Physics Letters•Nov 9, 2015•88 citations

Coplanar waveguide resonators for circuit quantum electrodynamics

M. Göppl, A. Fragner, Matthias Baur +7 more

High quality on-chip microwave resonators have recently found prominent new applications in quantum optics and quantum information processing experiments with superconducting electronic circuits, a field now known as circuit quantum electrodynamics (QED). They are also used as single photon detectors and parametric amplifiers. Here we analyze the physical properties of coplanar waveguide resonators and their relation to the materials properties for use in circuit QED. We have designed and fabricated resonators with fundamental frequencies from 2 to 9 GHz and quality factors ranging from a few hundreds to a several hundred thousands controlled by appropriately designed input and output coupling capacitors. The microwave transmission spectra measured at temperatures of 20 mK are shown to be in good agreement with theoretical lumped element and distributed element transmission matrix models. In particular, the experimentally determined resonance frequencies, quality factors, and insertion losses are fully and consistently explained by the two models for all measured devices. The high level of control and flexibility in design renders these resonators ideal for storing and manipulating quantum electromagnetic fields in integrated superconducting electronic circuits.

arXiv:0807.4094•Journal of Applied Physics•Dec 1, 2008•402 citations

A Versatile Analytical Model for Fast and Accurate Determination of Feedline-Coupled Resonators for Superconducting Qubit Readout

Zhen Luo, Lea Richard, Ivan Tsitsilin +4 more

Superconducting quantum chips commonly utilize quarter-wavelength (λ/4) transmission line resonators as readout circuits. An analytical model for the accurate determination of resonance frequencies and coupling Q-factors of feedline-coupled superconducting resonators is introduced. The model leverages four-port microwave network analysis, integrating boundary conditions and conformal mapping techniques to compute even- and odd-mode impedances in edge-coupled coplanar waveguide (CPW) structures. Its versatility allows application to both planar and 3-D heterogeneous architectures, making it a powerful tool for resonator design. To validate the model, a test chip with λ/4 resonators of varying geometries is fabricated and measured in a cryogenic environment. Comparisons with finite element method (FEM) simulations and experimental measurements confirm the model's accuracy, with resonance frequencies and coupling Q-factors aligning closely across configurations. This proposed model facilitates the design of superconducting resonators in readout circuits for more effective, scalable, and adaptable quantum computing architectures.

quant-pharXiv:2607.00490•IEEE Transactions on Microwave Theory and Techniques•Jul 2, 2026•2 citations

Superconducting Microstrip High-Q Microwave Resonators

A. DiNardo, J. G. Smith, Frank R. Arams

Superconducting miniature microstrip resonators, operating at X band, have been constructed using vacuum-deposited lead on low-loss sintered alumina substrate. Unloaded Q's as high as 200 000 and 500 000 have been measured at 14.3 GHz at 4.2 and 1.8 K, respectively.

Journal of Applied Physics•Jan 1, 1971•17 citations
Vacuum gap λ/2 microwave resonators are demonstrated as a route toward higher integration in superconducting qubit circuits. The resonators are fabricated from pieces on two silicon chips bonded together with an In-Sb bond. Measurements of the devices yield resonant frequencies in good agreement with simulations. Creating low loss circuits in this geometry is also discussed.
We have produced high-quality complex microwave circuits, such as multiplexed resonators and superconducting phase qubits, using a “vacuum-gap” technology that eliminates lossy dielectric materials. We have improved our design and fabrication strategy beyond our earlier work, leading to increased yield, enabling the realization of these complex circuits. We incorporate both novel vacuum-gap wiring crossovers for gradiometric inductors and vacuum-gap capacitors (VGC) on chip to produce resonant circuits that have large internal quality factors (30 000<QI<165 000) at 50 mK, outperforming most dielectric-filled devices. Resonators with VGCs as large as 180 pF confirm single mode behavior of our lumped-element components.
Abstract Ultra low-loss microwave materials are crucial for enhancing quantum coherence and scalability of superconducting qubits. Van der Waals (vdW) heterostructure is an attractive platform for quantum devices due to the single-crystal structure of the constituent two-dimensional (2D) layered materials and the lack of dangling bonds at their atomically sharp interfaces. However, new fabrication and characterization techniques are required to determine whether these structures can achieve low loss in the microwave regime. Here we report the fabrication of superconducting microwave resonators using NbSe2 that achieve a quality factor Q > 105. This value sets an upper bound that corresponds to a resistance of ⩽ 192 μ Ω when considering the additional loss introduced by integrating NbSe2 into a standard transmon circuit. This work demonstrates the compatibility of 2D layered materials with high-quality microwave quantum devices.
Superconducting enclosures will be key components of scalable quantum computing devices based on circuit quantum electrodynamics. Within a densely integrated device, they can protect qubits from noise and serve as quantum memory units. Whether constructed by machining bulk pieces of metal or microfabricating wafers, 3D enclosures are typically assembled from two or more parts. The resulting seams potentially dissipate crossing currents and limit performance. In this letter, we present measured quality factors of superconducting cavity resonators of several materials, dimensions, and seam locations. We observe that superconducting indium can be a low-loss RF conductor and form low-loss seams. Leveraging this, we create a superconducting micromachined resonator with indium that has a quality factor of two million, despite a greatly reduced mode volume. Inter-layer coupling to this type of resonator is achieved by an aperture located under a planar transmission line. The described techniques demonstrate a proof-of-principle for multilayer microwave integrated quantum circuits for scalable quantum computing.
High quality on-chip microwave resonators have recently found prominent new applications in quantum optics and quantum information processing experiments with superconducting electronic circuits, a field now known as circuit quantum electrodynamics (QED). They are also used as single photon detectors and parametric amplifiers. Here we analyze the physical properties of coplanar waveguide resonators and their relation to the materials properties for use in circuit QED. We have designed and fabricated resonators with fundamental frequencies from 2 to 9 GHz and quality factors ranging from a few hundreds to a several hundred thousands controlled by appropriately designed input and output coupling capacitors. The microwave transmission spectra measured at temperatures of 20 mK are shown to be in good agreement with theoretical lumped element and distributed element transmission matrix models. In particular, the experimentally determined resonance frequencies, quality factors, and insertion losses are fully and consistently explained by the two models for all measured devices. The high level of control and flexibility in design renders these resonators ideal for storing and manipulating quantum electromagnetic fields in integrated superconducting electronic circuits.
Superconducting quantum chips commonly utilize quarter-wavelength (λ/4) transmission line resonators as readout circuits. An analytical model for the accurate determination of resonance frequencies and coupling Q-factors of feedline-coupled superconducting resonators is introduced. The model leverages four-port microwave network analysis, integrating boundary conditions and conformal mapping techniques to compute even- and odd-mode impedances in edge-coupled coplanar waveguide (CPW) structures. Its versatility allows application to both planar and 3-D heterogeneous architectures, making it a powerful tool for resonator design. To validate the model, a test chip with λ/4 resonators of varying geometries is fabricated and measured in a cryogenic environment. Comparisons with finite element method (FEM) simulations and experimental measurements confirm the model's accuracy, with resonance frequencies and coupling Q-factors aligning closely across configurations. This proposed model facilitates the design of superconducting resonators in readout circuits for more effective, scalable, and adaptable quantum computing architectures.