Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

AIP Advances

Magnetic stability of oxygen defects on the SiO2 surface

Nicole Adelstein, Donghwa Lee, Jonathan L. DuBois, Keith G. Ray, Joel Basile Varley, Vincenzo Lordi

Published Feb 1, 2017• 15 citations
Publisher

Abstract

The magnetic stability of E′ centers and the peroxy radical on the surface of α-quartz is investigated with first-principles calculations to understand their role in magnetic flux noise in superconducting qubits (SQs) and superconducting quantum interference devices (SQUIDs) fabricated on amorphous silica substrates. Paramagnetic E′ centers are common in both stoichiometric and oxygen deficient silica and quartz, and we calculate that they are more common on the surface than the bulk. However, we find the surface defects are magnetically stable in their paramagnetic ground state and thus will not contribute to 1/f noise through fluctuation at millikelvin temperatures.

DOI
10.1063/1.4977194

Related papers

Magnetic fluctuation from oxygen deficiency centers on the SiO$_2$ surface

Nicole Adelstein, Donghwa Lee, Jonathan L. DuBois +1 more

The magnetic stability of oxygen deficiency centers on the surface of α-quartz is investigated with first- principles calculations to understand their role in contributing to magnetic flux noise in superconducting qubits (SQs) and superconducting quantum interference devices (SQUIDs) fabricated on amorphous silica substrates. Magnetic defects on the substrate are likely responsible for some of the 1/f noise that plagues these systems. Dangling-bonds associated with three-coordinated Si atoms allow electron density transfer between spin up and down channels, resulting in low energy magnetic states. Such under-coordinated Si defects are common in both stoichiometric and oxygen deficient silica and quartz and are a probable source of magnetic flux fluctuations in SQs and SQUIDs.

arXiv:1403.0685•Mar 4, 2014•0 citations

Identification of the Local Sources of Paramagnetic Noise in Superconducting Qubit Devices Fabricated on α−Al2O3 Substrates Using Density-Functional Calculations

Donghwa Lee, Jonathan L. DuBois, Vincenzo Lordi

Effective methods for decoupling superconducting qubits (SQs) from parasitic environmental noise sources are critical for increasing their lifetime and phase fidelity. While considerable progress has been made in this area, the microscopic origin of noise remains largely unknown. In this work, first principles density functional theory calculations are employed to identify the microscopic origins of magnetic noise sources in SQs on an α-Al2O3 substrate. The results indicate that it is unlikely that the existence of intrinsic point defects and defect complexes in the substrate are responsible for low frequency noise in these systems. Rather, a comprehensive analysis of extrinsic defects shows that surface aluminum ions interacting with ambient molecules will form a bath of magnetic moments that can couple to the SQ paramagnetically. The microscopic origin of this magnetic noise source is discussed and strategies for ameliorating the effects of these magnetic defects are proposed.

Physical Review Letters•Jan 7, 2014•48 citations

Candidate Source of Flux Noise in SQUIDs: Adsorbed Oxygen Molecules

Hui Wang, Chuntai Shi, Jun Hu +3 more

A major obstacle to using superconducting quantum interference devices (SQUIDs) as qubits is flux noise. We propose that the heretofore mysterious spins producing flux noise could be O_{2} molecules adsorbed on the surface. Using density functional theory calculations, we find that an O_{2} molecule adsorbed on an α-alumina surface has a magnetic moment of ~1.8 μ_{B}. The spin is oriented perpendicular to the axis of the O-O bond, the barrier to spin rotations is about 10 mK. Monte Carlo simulations of ferromagnetically coupled, anisotropic XY spins on a square lattice find 1/f magnetization noise, consistent with flux noise in Al SQUIDs.

arXiv:1504.08075•Physical Review Letters•Aug 14, 2015•62 citations

On the nature of decoherence in quantum circuits: Revealing the structural motif of the surface radicals in α-Al 2 O 3

Sun Un, Sebastian E. de Graaf, Patrice Bertet +2 more

Quantum information technology puts stringent demands on the quality of materials and interfaces in the pursuit of increased device coherence. Yet, little is known about the chemical structure and origins of paramagnetic impurities that produce flux/charge noise that causes decoherence of fragile quantum states and impedes the progress toward large-scale quantum computing. Here, we perform high magnetic field electron paramagnetic resonance (HFEPR) and hyperfine multispin spectroscopy on α-Al 2 O 3 , a common substrate for quantum devices. In its amorphous form, α-Al 2 O 3 is also unavoidably present in aluminum-based superconducting circuits and qubits. The detected paramagnetic centers are immanent to the surface and have a well-defined but highly complex structure that extends over multiple hydrogen, aluminum, and oxygen atoms. Modeling reveals that the radicals likely originate from well-known reactive oxygen chemistry common to many metal oxides. We discuss how EPR spectroscopy might benefit the search for surface passivation and decoherence mitigation strategies.

Science Advances•Apr 6, 2022•16 citations

Field-Dependent Qubit Flux Noise Simulated from Materials-Specific Disordered Exchange Interactions Between Paramagnetic Adsorbates

Keith G. Ray, Yaniv Rosen, Jonathan L Dubois +1 more

Superconducting quantum devices, from qubits and magnetometers to dark matter detectors, are influenced by magnetic flux noise originating from paramagnetic surface defects and impurities. These spin systems can feature complex dynamics, including a Berezinskii-Kosterlitz-Thouless transition, that depend on the lattice, interactions, external fields, and disorder. However, the disorder included in typical models is not materials-specific, diminishing the ability to accurately capture measured flux noise phenomena. We present a first principles-based simulation of a spin lattice consisting of paramagnetic O$_2$ molecules on an Al$_2$O$_3$ surface, a likely flux noise source in superconducting qubits, to elucidate opportunities to mitigate flux noise. We simulate an ensemble of surface adsorbates with disordered orientations and calculate the orientation-dependent exchange couplings using density functional theory. Thus, our spin simulation has no free parameters or assumed functional form of the disorder, and captures correlation in the defect landscape that would appear in real systems. We calculate a range of exchange interactions between electron pairs, with the smallest values, 0.016 meV and -0.023 meV, being in the range required to act as a two-level system and couple to GHz resonators. We calculate the flux noise frequency, temperature, and applied external magnetic field dependence, as well as the susceptibility-flux noise cross-correlation. Calculated trends agree with experiment, demonstrating that a surface harboring paramagnetic adsorbates arranged with materials-specific disorder and interactions captures the various properties of magnetic flux noise observed in superconducting circuits. In addition, we find that an external electric field can tune the spin-spin interaction strength and reduce magnetic flux noise.

cond-mat.mes-hallCross-listedarXiv:2602.09471•Feb 11, 2026•0 citations

Magnetic flux noise in SQUIDs and qubits

Steven M. Anton

For over three decades, the presence of magnetic flux noise with a power spectral density scaling roughly as $S_Phi(f) propto 1/f^alpha$, where $alpha lesssim 1$, has been known to limit the low-frequency performance of dc superconducting quantum interference devices (SQUIDs). In recent years, experiments indicate that this same noise persists to frequencies up to 1~GHz and is a dominant source of dephasing in flux-sensitive superconducting quantum bits (qubits). Thus, the reduction of flux noise presents a major hurdle towards the successful realization of scalable quantum computers that are based on flux-based qubits. In this thesis, we present experimental measurements, theoretical analyses, and numerical simulations that support a more detailed understanding of both the microscopic and macroscopic properties of flux noise.Our experimental work begins with flux noise measurements of a large number of SQUIDs in the temperature range from 0.1~K to 4~K. We report on measurements of ten SQUIDs with systematically varied geometries and show that $alpha$ increases as the temperature is lowered; in so doing, each spectrum pivots about a nearly constant frequency. The mean square flux noise, inferred by integrating the power spectra, grows rapidly with temperature and at a given temperature is approximately independent of the outer dimension of a given SQUID washer. We show that these results are incompatible with a model based on the random reversal of independent, spins that are located at the surface of the SQUID washer.In the course of our flux noise measurements, we became aware of a spurious contribution to low-frequency critical current noise in Josephson junctions---normally attributed to charge trapping in the barrier---arising from temperature instabilities inherent in cryogenic systems. These temperature fluctuations modify the critical current via its temperature dependence. By computing cross-correlations between measured temperature and critical current noise in Al-AlOx-Al junctions, we show that, despite excellent temperature stability, temperature fluctuations induce observable critical current fluctuations. Particularly, because $1/f$ critical current noise has decreased with improved fabrication techniques in recent years, it is important to understand and eliminate this additional noise source.Next, we introduce a numerical method of calculating the mean square flux noise $Phisq$ from independently fluctuating spins on the surface of thin-film loops of arbitrary geometry. By reciprocity, $Phisq$ is proportional to $langleBbf(rbf)^2rangle$, where $Bbf(rbf)$ is the magnetic field generated by a circulating current around the loop and $rbf$ varies over the loop surface. By discretizing the loop nonuniformly, we efficiently and accurately compute the current distribution and resulting magnetic field, which may vary rapidly across the loop. We use this method to compute $Phisq$ in a number of scenarios in which we systematically vary physical parameters of the loop. We compare our simulations to an earlier analytic result predicting that $Phisq propto R/W$ in the limit where the loop radius $R$ is much greater than the linewidth $W$. We further show that the previously neglected contribution of edge spins to $Phisq$ is significant---even dominant---in narrow-linewidth loops.To calculate theoretical dephasing rates in qubits, we consider flux noise with a spectral density $S_Phi(f) = A^2/(f/1~hbox{Hz})^alpha$, where $A$ is of the order of 1~$muPhi_0 , hbox{Hz}^{-1/2}$ and $0.6 leq alpha leq 1.2$; $Phi_{0}$ is the flux quantum. For a qubit with an energy level splitting linearly coupled to the applied flux, our calculations of the dependence of the pure dephasing time $tau_phi$ of Ramsey and echo pulse sequences on $alpha$ for fixed $A$ show that $tau_phi$ decreases rapidly as $alpha$ is reduced. We find that $tau_phi$ is relatively insensitive to the noise bandwidth, $f_1 leq f leq f_2$, for all $alpha$ provided the ultraviolet cutoff frequency $f_2 > 1/tau_phi$. We calculate the ratio $tau_{phi,E} / tau_{phi,R}$ of the echo ($E$) and Ramsey ($R$) sequences, and the dependence of the decay function on $alpha$ and $f_2$. We investigate the case in which $S_Phi(f_0)$ is fixed at the ``pivot frequency'' $f_0 neq 1$~Hz while $alpha$ is varied, and find that the choice of $f_0$ can greatly influence the sensitivity of $tau_{phi,E}$ and $tau_{phi,R}$ to the value of $alpha$.Finally, we conclude with a brief review of our principal results and conclusions. We also comment on promising avenues of future research.

•Jan 1, 2013•0 citations
The magnetic stability of E′ centers and the peroxy radical on the surface of α-quartz is investigated with first-principles calculations to understand their role in magnetic flux noise in superconducting qubits (SQs) and superconducting quantum interference devices (SQUIDs) fabricated on amorphous silica substrates. Paramagnetic E′ centers are common in both stoichiometric and oxygen deficient silica and quartz, and we calculate that they are more common on the surface than the bulk. However, we find the surface defects are magnetically stable in their paramagnetic ground state and thus will not contribute to 1/f noise through fluctuation at millikelvin temperatures.
Magnetic fluctuation from oxygen deficiency centers on the SiO2_22​ surface
The magnetic stability of oxygen deficiency centers on the surface of α-quartz is investigated with first- principles calculations to understand their role in contributing to magnetic flux noise in superconducting qubits (SQs) and superconducting quantum interference devices (SQUIDs) fabricated on amorphous silica substrates. Magnetic defects on the substrate are likely responsible for some of the 1/f noise that plagues these systems. Dangling-bonds associated with three-coordinated Si atoms allow electron density transfer between spin up and down channels, resulting in low energy magnetic states. Such under-coordinated Si defects are common in both stoichiometric and oxygen deficient silica and quartz and are a probable source of magnetic flux fluctuations in SQs and SQUIDs.
Effective methods for decoupling superconducting qubits (SQs) from parasitic environmental noise sources are critical for increasing their lifetime and phase fidelity. While considerable progress has been made in this area, the microscopic origin of noise remains largely unknown. In this work, first principles density functional theory calculations are employed to identify the microscopic origins of magnetic noise sources in SQs on an α-Al2O3 substrate. The results indicate that it is unlikely that the existence of intrinsic point defects and defect complexes in the substrate are responsible for low frequency noise in these systems. Rather, a comprehensive analysis of extrinsic defects shows that surface aluminum ions interacting with ambient molecules will form a bath of magnetic moments that can couple to the SQ paramagnetically. The microscopic origin of this magnetic noise source is discussed and strategies for ameliorating the effects of these magnetic defects are proposed.
A major obstacle to using superconducting quantum interference devices (SQUIDs) as qubits is flux noise. We propose that the heretofore mysterious spins producing flux noise could be O_{2} molecules adsorbed on the surface. Using density functional theory calculations, we find that an O_{2} molecule adsorbed on an α-alumina surface has a magnetic moment of ~1.8 μ_{B}. The spin is oriented perpendicular to the axis of the O-O bond, the barrier to spin rotations is about 10 mK. Monte Carlo simulations of ferromagnetically coupled, anisotropic XY spins on a square lattice find 1/f magnetization noise, consistent with flux noise in Al SQUIDs.
Quantum information technology puts stringent demands on the quality of materials and interfaces in the pursuit of increased device coherence. Yet, little is known about the chemical structure and origins of paramagnetic impurities that produce flux/charge noise that causes decoherence of fragile quantum states and impedes the progress toward large-scale quantum computing. Here, we perform high magnetic field electron paramagnetic resonance (HFEPR) and hyperfine multispin spectroscopy on α-Al 2 O 3 , a common substrate for quantum devices. In its amorphous form, α-Al 2 O 3 is also unavoidably present in aluminum-based superconducting circuits and qubits. The detected paramagnetic centers are immanent to the surface and have a well-defined but highly complex structure that extends over multiple hydrogen, aluminum, and oxygen atoms. Modeling reveals that the radicals likely originate from well-known reactive oxygen chemistry common to many metal oxides. We discuss how EPR spectroscopy might benefit the search for surface passivation and decoherence mitigation strategies.
Superconducting quantum devices, from qubits and magnetometers to dark matter detectors, are influenced by magnetic flux noise originating from paramagnetic surface defects and impurities. These spin systems can feature complex dynamics, including a Berezinskii-Kosterlitz-Thouless transition, that depend on the lattice, interactions, external fields, and disorder. However, the disorder included in typical models is not materials-specific, diminishing the ability to accurately capture measured flux noise phenomena. We present a first principles-based simulation of a spin lattice consisting of paramagnetic O2_22​ molecules on an Al2_22​O3_33​ surface, a likely flux noise source in superconducting qubits, to elucidate opportunities to mitigate flux noise. We simulate an ensemble of surface adsorbates with disordered orientations and calculate the orientation-dependent exchange couplings using density functional theory. Thus, our spin simulation has no free parameters or assumed functional form of the disorder, and captures correlation in the defect landscape that would appear in real systems. We calculate a range of exchange interactions between electron pairs, with the smallest values, 0.016 meV and -0.023 meV, being in the range required to act as a two-level system and couple to GHz resonators. We calculate the flux noise frequency, temperature, and applied external magnetic field dependence, as well as the susceptibility-flux noise cross-correlation. Calculated trends agree with experiment, demonstrating that a surface harboring paramagnetic adsorbates arranged with materials-specific disorder and interactions captures the various properties of magnetic flux noise observed in superconducting circuits. In addition, we find that an external electric field can tune the spin-spin interaction strength and reduce magnetic flux noise.
For over three decades, the presence of magnetic flux noise with a power spectral density scaling roughly as SPhi(f)propto1/falphaS_Phi(f) propto 1/f^alphaSP​hi(f)propto1/falpha, where alphalesssim1alpha lesssim 1alphalesssim1, has been known to limit the low-frequency performance of dc superconducting quantum interference devices (SQUIDs). In recent years, experiments indicate that this same noise persists to frequencies up to 1~GHz and is a dominant source of dephasing in flux-sensitive superconducting quantum bits (qubits). Thus, the reduction of flux noise presents a major hurdle towards the successful realization of scalable quantum computers that are based on flux-based qubits. In this thesis, we present experimental measurements, theoretical analyses, and numerical simulations that support a more detailed understanding of both the microscopic and macroscopic properties of flux noise.Our experimental work begins with flux noise measurements of a large number of SQUIDs in the temperature range from 0.1~K to 4~K. We report on measurements of ten SQUIDs with systematically varied geometries and show that alphaalphaalpha increases as the temperature is lowered; in so doing, each spectrum pivots about a nearly constant frequency. The mean square flux noise, inferred by integrating the power spectra, grows rapidly with temperature and at a given temperature is approximately independent of the outer dimension of a given SQUID washer. We show that these results are incompatible with a model based on the random reversal of independent, spins that are located at the surface of the SQUID washer.In the course of our flux noise measurements, we became aware of a spurious contribution to low-frequency critical current noise in Josephson junctions---normally attributed to charge trapping in the barrier---arising from temperature instabilities inherent in cryogenic systems. These temperature fluctuations modify the critical current via its temperature dependence. By computing cross-correlations between measured temperature and critical current noise in Al-AlOx-Al junctions, we show that, despite excellent temperature stability, temperature fluctuations induce observable critical current fluctuations. Particularly, because 1/f1/f1/f critical current noise has decreased with improved fabrication techniques in recent years, it is important to understand and eliminate this additional noise source.Next, we introduce a numerical method of calculating the mean square flux noise PhisqPhisqPhisq from independently fluctuating spins on the surface of thin-film loops of arbitrary geometry. By reciprocity, PhisqPhisqPhisq is proportional to langleBbf(rbf)2ranglelangleBbf(rbf)^2ranglelangleBbf(rbf)2rangle, where Bbf(rbf)Bbf(rbf)Bbf(rbf) is the magnetic field generated by a circulating current around the loop and rbfrbfrbf varies over the loop surface. By discretizing the loop nonuniformly, we efficiently and accurately compute the current distribution and resulting magnetic field, which may vary rapidly across the loop. We use this method to compute PhisqPhisqPhisq in a number of scenarios in which we systematically vary physical parameters of the loop. We compare our simulations to an earlier analytic result predicting that PhisqproptoR/WPhisq propto R/WPhisqproptoR/W in the limit where the loop radius RRR is much greater than the linewidth WWW. We further show that the previously neglected contribution of edge spins to PhisqPhisqPhisq is significant---even dominant---in narrow-linewidth loops.To calculate theoretical dephasing rates in qubits, we consider flux noise with a spectral density SPhi(f)=A2/(f/1 hboxHz)alphaS_Phi(f) = A^2/(f/1~hbox{Hz})^alphaSP​hi(f)=A2/(f/1 hboxHz)alpha, where AAA is of the order of 1~muPhi0,hboxHz−1/2muPhi_0 , hbox{Hz}^{-1/2}muPhi0​,hboxHz−1/2 and 0.6leqalphaleq1.20.6 leq alpha leq 1.20.6leqalphaleq1.2; Phi0Phi_{0}Phi0​ is the flux quantum. For a qubit with an energy level splitting linearly coupled to the applied flux, our calculations of the dependence of the pure dephasing time tauphitau_phitaup​hi of Ramsey and echo pulse sequences on alphaalphaalpha for fixed AAA show that tauphitau_phitaup​hi decreases rapidly as alphaalphaalpha is reduced. We find that tauphitau_phitaup​hi is relatively insensitive to the noise bandwidth, f1leqfleqf2f_1 leq f leq f_2f1​leqfleqf2​, for all alphaalphaalpha provided the ultraviolet cutoff frequency f2>1/tauphif_2 > 1/tau_phif2​>1/taup​hi. We calculate the ratio tauphi,E/tauphi,Rtau_{phi,E} / tau_{phi,R}tauphi,E​/tauphi,R​ of the echo (EEE) and Ramsey (RRR) sequences, and the dependence of the decay function on alphaalphaalpha and f2f_2f2​. We investigate the case in which SPhi(f0)S_Phi(f_0)SP​hi(f0​) is fixed at the ``pivot frequency'' f0neq1f_0 neq 1f0​neq1~Hz while alphaalphaalpha is varied, and find that the choice of f0f_0f0​ can greatly influence the sensitivity of tauphi,Etau_{phi,E}tauphi,E​ and tauphi,Rtau_{phi,R}tauphi,R​ to the value of alphaalphaalpha.Finally, we conclude with a brief review of our principal results and conclusions. We also comment on promising avenues of future research.