Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEICE Technical Report; IEICE Tech. Rep.

Study of superconducting tunable dual-band bandpass filter with independently controllable center frequencies

Takahiro Unno, N. Sekiya

Published Dec 8, 2016• 0 citations
OpenAlex

Related papers

Study of Superconducting Dual-Bandpass Resonators with Independent Controllable Resonant Frequency

Takahiro Unno, N. Sekiya

The Japan Society of Applied Physics•Feb 8, 2016•0 citations

Third-Order Intermodulation Measurements for Superconducting Bandpass Filters

Hisashi Sato, Keizo Cho

IEICE Transactions on Electronics•May 1, 2004•0 citations

Study of mechanically tunable superconducting microwave filter using lumped elements

Shigeki Hontsu, S. Mine, Hiroaki Nishikawa +5 more

We propose a mechanically tunable superconducting microwave filter based on lumped elements composed of planar meander-line inductors (L) and inter-digital capacitors (C). As the first step, we have designed and evaluated a 3-pole Chebyshev bandpass filters with lumped elements using a circuit simulator. It is found that the center frequency, bandwidth and skirt rejection of the filter can be controlled by changing only the capacitance. The L and C elements values are estimated using an electromagnetic simulator. Furthermore, we have fabricated the inter-digital capacitor designed with the above procedure. We have evaluated change of the C values using mechanical tuning as a step toward a tunable superconducting microwave filter.

IEEE Transactions on Applied Superconductivity•Jun 1, 2003•14 citations

Multiresonator Superconducting Band-Pass and Band-Reject Filters

Frank R. Arams, R. Domchick, Kenneth Siegel +3 more

Journal of Applied Physics•Apr 1, 1969•0 citations

Niobium Tunable Microwave Filter

Rizwan Rafique, Thomas Ohki, Peter Linnér +1 more

A superconductor bandpass filter with tunable central frequency in the range of 2-3.5 GHz has been implemented using superconducting quantum interference devices (SQUIDs). The filter is designed using two pi-network resonators connected by a transmission line. Both resonators have a SQUID inductor with a tuning range of 65-200 pH, controlled by current magnetically coupled to the SQUIDs. Over a frequency tunability of 1.5 GHz, the filter has a mid-band insertion loss of 0.5-3.0 dB and corresponding maximum unloaded quality factor of 40. Due to the presence of active elements, tunability of the filter depends on the power of the microwave signal. A maximum power of -52 dBm corresponds to a frequency tuning range of 15%. Spectral measurements by controlling the central frequency of the filter with variable pulsewidth shows that the filter can be tuned at a rate of 120 GHz/mus.

IEEE Transactions on Microwave Theory and Techniques•Apr 15, 2009•9 citations

Dual-Band Bandpass Filter Optimized for High Q-Factor

Walid M. Fahmy, Asmaa Elsayed Farahat, Khalid Fawzy Ahmed Hussein +1 more

High quality factor bandpass filters based on a number of cascaded resonators of dual-resonance mechanism are proposed in the present paper. Each resonator is constructed as two overlapped coplanar waveguide (CPW) resonant structures. The cascaded resonators mediate microwave coupling between two isolated corner-shaped CPW feeders only at the resonant frequencies leading to a bandpass filter of high quality factor. The two resonant frequencies and the separation between them can be fine-tuned by the dimensions of the structure. The effects of the dimensional parameters of the resonator and the feeding CPW regions on the resonant frequencies and the performance of the bandpass filter are investigated. The effect of the loss tangent of the dielectric substrate material on the quality factors at the two resonant frequencies is studied. Three prototypes of the proposed filter are fabricated and experimentally studied for more understanding of the underlying physical principles of operation and for verifying some of the simulation results. The experimental results show good agreement when compared with the corresponding simulation results. It is shown that, at low enough absolute temperature, the proposed structure can operate as superconducting microwave resonator when made from the appropriate materials. Also, it is shown that an optimized design of the proposed bandpass filter, based on superconducting CPWR structure, can achieve quality factors high enough to form a quantum data bus for hybrid architecture of quantum information systems.

The Applied Computational Electromagnetics Society Journal (ACES)•May 10, 2021•3 citations
We propose a mechanically tunable superconducting microwave filter based on lumped elements composed of planar meander-line inductors (L) and inter-digital capacitors (C). As the first step, we have designed and evaluated a 3-pole Chebyshev bandpass filters with lumped elements using a circuit simulator. It is found that the center frequency, bandwidth and skirt rejection of the filter can be controlled by changing only the capacitance. The L and C elements values are estimated using an electromagnetic simulator. Furthermore, we have fabricated the inter-digital capacitor designed with the above procedure. We have evaluated change of the C values using mechanical tuning as a step toward a tunable superconducting microwave filter.
A superconductor bandpass filter with tunable central frequency in the range of 2-3.5 GHz has been implemented using superconducting quantum interference devices (SQUIDs). The filter is designed using two pi-network resonators connected by a transmission line. Both resonators have a SQUID inductor with a tuning range of 65-200 pH, controlled by current magnetically coupled to the SQUIDs. Over a frequency tunability of 1.5 GHz, the filter has a mid-band insertion loss of 0.5-3.0 dB and corresponding maximum unloaded quality factor of 40. Due to the presence of active elements, tunability of the filter depends on the power of the microwave signal. A maximum power of -52 dBm corresponds to a frequency tuning range of 15%. Spectral measurements by controlling the central frequency of the filter with variable pulsewidth shows that the filter can be tuned at a rate of 120 GHz/mus.
High quality factor bandpass filters based on a number of cascaded resonators of dual-resonance mechanism are proposed in the present paper. Each resonator is constructed as two overlapped coplanar waveguide (CPW) resonant structures. The cascaded resonators mediate microwave coupling between two isolated corner-shaped CPW feeders only at the resonant frequencies leading to a bandpass filter of high quality factor. The two resonant frequencies and the separation between them can be fine-tuned by the dimensions of the structure. The effects of the dimensional parameters of the resonator and the feeding CPW regions on the resonant frequencies and the performance of the bandpass filter are investigated. The effect of the loss tangent of the dielectric substrate material on the quality factors at the two resonant frequencies is studied. Three prototypes of the proposed filter are fabricated and experimentally studied for more understanding of the underlying physical principles of operation and for verifying some of the simulation results. The experimental results show good agreement when compared with the corresponding simulation results. It is shown that, at low enough absolute temperature, the proposed structure can operate as superconducting microwave resonator when made from the appropriate materials. Also, it is shown that an optimized design of the proposed bandpass filter, based on superconducting CPWR structure, can achieve quality factors high enough to form a quantum data bus for hybrid architecture of quantum information systems.