Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Materials Research Express

Electronic structure of strongly correlated materials: from one-particle to many-body theory

Fredrik Nilsson, F. Aryasetiawan

Published Feb 9, 2017• 10 citations
Publisher

Abstract

One of the great challenges of modern condensed matter theory is to develop reliable and practical methods for describing the electronic structure of strongly correlated materials fully from first principles. It has been known for a long time that the widely used Kohn-Sham density functional theory within the local density approximation (LDA) often fails for these systems. This paper describes the theoretical development of including electron correlations beyond the LDA with emphasis on ab initio methods, starting from the highly successful LDA+U and the many-body Green's function-based GW method to the state-of-the-art combination of dynamical mean-field theory and GW. Apart from reviewing the development so far we also present some previously unpublished results.

DOI
10.1088/2053-1591/aa5fa1

Related papers

Recent Progress in First-Principles Methods for Computing the Electronic Structure of Correlated Materials

Fredrik Nilsson, F. Aryasetiawan

Substantial progress has been achieved in the last couple of decades in computing the electronic structure of correlated materials from first principles. This progress has been driven by parallel development in theory and numerical algorithms. Theoretical development in combining ab initio approaches and many-body methods is particularly promising. A crucial role is also played by a systematic method for deriving a low-energy model, which bridges the gap between real and model systems. In this article, an overview is given tracing the development from the LDA+U to the latest progress in combining the G W method and (extended) dynamical mean-field theory ( G W +EDMFT). The emphasis is on conceptual and theoretical aspects rather than technical ones.

Computation•Mar 19, 2018•21 citations

Solving the strong-correlation problem in materials

Eva Pavarini

Abstract This article is a short introduction to the modern computational techniques used to tackle the many-body problem in materials. The aim is to present the basic ideas, using simple examples to illustrate strengths and weaknesses of each method. We will start from density-functional theory (DFT) and the Kohn–Sham construction—the standard computational tools for performing electronic structure calculations. Leaving the realm of rigorous density-functional theory, we will discuss the established practice of adopting the Kohn–Sham Hamiltonian as approximate model. After recalling the triumphs of the Kohn–Sham description, we will stress the fundamental reasons of its failure for strongly-correlated compounds, and discuss the strategies adopted to overcome the problem. The article will then focus on the most effective method so far, the DFT+DMFT technique and its extensions. Achievements, open issues and possible future developments will be reviewed. The key differences between dynamical (DFT+DMFT) and static (DFT+ U ) mean-field methods will be elucidated. In the conclusion, we will assess the apparent dichotomy between first-principles and model-based techniques, emphasizing the common ground that in fact they share.

Rivista Del Nuovo Cimento•Jul 14, 2021•27 citations

First-Principles Approach to the Electronic Structure of Strongly Correlated Systems: Combining the GW Approximation and Dynamical Mean-Field Theory

Silke Biermann, F. Aryasetiawan, Antoine Georges

We propose a dynamical mean-field approach for calculating the electronic structure of strongly correlated materials from first principles. The scheme combines the GW method with dynamical mean-field theory, which enables one to treat strong interaction effects. It avoids the conceptual problems inherent to conventional "LDA+DMFT," such as Hubbard interaction parameters and double-counting terms. We apply a simplified version of the approach to the electronic structure of nickel and find encouraging results.

arXiv:cond-mat/0207419•Physical Review Letters•Feb 27, 2003•398 citations

Methodological study of computational approaches to address the problem of strong correlations

Juho Lee

The main focus of this thesis is the detailed investigation of computational methods to tackle strongly correlated materials in which a rich variety of exotic phenomena are found. A many-body problem with sizable electronic correlations can no longer be explained by independent-particle approximations such as density functional theory (DFT) or tight-binding approaches. The influence of an electron to the others is too strong for each electron to be treated as an independent quasiparticle and consequently those standard band-structure methods fail even at a qualitative level. One of the most powerful approaches for strong correlations is the dynamical mean-field theory (DMFT), which has enlightened the understanding of the Mott transition based on the Hubbard model. For realistic applications, the dynamical mean-field theory is combined with various independent-particles approaches. The most widely used one is the DMFT combined with the DFT in the local density approximation (LDA), so-called LDA+DMFT. In this approach, the electrons in the weakly correlated orbitals are calculated by LDA while others in the strongly correlated orbitals are treated by DMFT. Recently, the method combining DMFT with Hedin's $GW$ approximation was also developed, in which the momentum-dependent self-energy is also added. In this thesis, we discuss the application of those methodologies based on DMFT. First, we apply the dynamical mean-field theory to solve the 3-dimensional Hubbard model in Chap. 3. In this application, we model the interface between the thermodynamically coexisting metal and Mott insulator. We show how to model the required slab geometry and extract the electronic spectra. We construct an effective Landau free energy and compute the variation of its parameters across the phase diagram. Finally, using a linear mixture of the density and double-occupancy, we identify a natural Ising order parameter which unifies the treatment of the bandwidth and filling controlled Mott transitions. Secondly, we study the double-counting problem, a subtle issue that arises in LDA+DMFT. We propose a highly precise double-counting functional, in which the intersection of LDA and DMFT is calculated exactly, and implement a parameter-free version of the LDA+DMFT that is tested on one of the simplest strongly correlated systems, the H2 molecule. We show that the exact double-counting treatment along with a good DMFT projector leads to very accurate and total energy and excitation spectrum of H$_2$ molecule. Finally, we implement various versions of $GW$+DMFT, in its fully self-consistent way, one shot GW approximation, and quasiparticle self-consistent scheme, and studied how well these combined methods perform on H$_2$ molecule as compared to more established methods such as LDA+DMFT. We found that most flavors of GW+DMFT break down in strongly correlated regime due to causality violation. Among GW+DMFT methods, only the self-consistent quasiparticle GW+DMFT with static double-counting, and a new method with causal double-counting, correctly recover the atomic limit at large H-atom separation. While some flavors of GW+DMFT improve the single-electron spectra of LDA+DMFT, the total energy is best predicted by LDA+DMFT, for which the exact double-counting is known, and is static.

•Jan 1, 2017•0 citations

Electronic Structure of Strongly Correlated Systems Emerging from Combining Path-Integral Renormalization Group with the Density-Functional Approach

Yoshiki Imai, Igor V. Solovyev, Masatoshi Imada

A new scheme of first-principles computation for strongly correlated electron systems is proposed. This scheme starts from the local-density approximation (LDA) at high-energy band structure, while the low-energy effective Hamiltonian is constructed by a downfolding procedure using combinations of the constrained-LDA and the GW method. The obtained low-energy Hamiltonian is solved by the path-integral renormalization-group method, where spatial and dynamical fluctuations are fully considered. An application to Sr2VO4 shows that the scheme is powerful in agreement with experimental results. It further predicts a nontrivial orbital-stripe order.

arXiv:cond-mat/0503270•Physical Review Letters•Oct 19, 2005•72 citations

Many-Body Green’s Function Theory and the GW Approximation

In Chapter 2, we pointed out that although the Kohn–Sham (KS) eigenvalues provide a good zeroth-order approximation for the single-particle excitation energies, LDA/GGA fails to give a satisfactory description of the fundamental band gaps in semiconductors and insulations. The many-body Green function theory (or otherwise called many-body perturbation theory), on the other hand, provides the formal basis for evaluating the experimentally observed quasi-particle band structures. Nowadays, it has become routine practice to resort to this many-body perturbation theory (especially within its so-called “ GW approximation”) for the descriptions of the single-particle excitation in real poly-atomic systems. Because of this, we will present an overview of the Green function method in the many-body electronic systems, with a special emphasis on the GW approximation in this chapter.

Peking University-World Scientific advanced physics series/Peking University-World Scientific advance physics series•Jan 8, 2018•0 citations
One of the great challenges of modern condensed matter theory is to develop reliable and practical methods for describing the electronic structure of strongly correlated materials fully from first principles. It has been known for a long time that the widely used Kohn-Sham density functional theory within the local density approximation (LDA) often fails for these systems. This paper describes the theoretical development of including electron correlations beyond the LDA with emphasis on ab initio methods, starting from the highly successful LDA+U and the many-body Green's function-based GW method to the state-of-the-art combination of dynamical mean-field theory and GW. Apart from reviewing the development so far we also present some previously unpublished results.
Substantial progress has been achieved in the last couple of decades in computing the electronic structure of correlated materials from first principles. This progress has been driven by parallel development in theory and numerical algorithms. Theoretical development in combining ab initio approaches and many-body methods is particularly promising. A crucial role is also played by a systematic method for deriving a low-energy model, which bridges the gap between real and model systems. In this article, an overview is given tracing the development from the LDA+U to the latest progress in combining the G W method and (extended) dynamical mean-field theory ( G W +EDMFT). The emphasis is on conceptual and theoretical aspects rather than technical ones.
Abstract This article is a short introduction to the modern computational techniques used to tackle the many-body problem in materials. The aim is to present the basic ideas, using simple examples to illustrate strengths and weaknesses of each method. We will start from density-functional theory (DFT) and the Kohn–Sham construction—the standard computational tools for performing electronic structure calculations. Leaving the realm of rigorous density-functional theory, we will discuss the established practice of adopting the Kohn–Sham Hamiltonian as approximate model. After recalling the triumphs of the Kohn–Sham description, we will stress the fundamental reasons of its failure for strongly-correlated compounds, and discuss the strategies adopted to overcome the problem. The article will then focus on the most effective method so far, the DFT+DMFT technique and its extensions. Achievements, open issues and possible future developments will be reviewed. The key differences between dynamical (DFT+DMFT) and static (DFT+ U ) mean-field methods will be elucidated. In the conclusion, we will assess the apparent dichotomy between first-principles and model-based techniques, emphasizing the common ground that in fact they share.
We propose a dynamical mean-field approach for calculating the electronic structure of strongly correlated materials from first principles. The scheme combines the GW method with dynamical mean-field theory, which enables one to treat strong interaction effects. It avoids the conceptual problems inherent to conventional "LDA+DMFT," such as Hubbard interaction parameters and double-counting terms. We apply a simplified version of the approach to the electronic structure of nickel and find encouraging results.
The main focus of this thesis is the detailed investigation of computational methods to tackle strongly correlated materials in which a rich variety of exotic phenomena are found. A many-body problem with sizable electronic correlations can no longer be explained by independent-particle approximations such as density functional theory (DFT) or tight-binding approaches. The influence of an electron to the others is too strong for each electron to be treated as an independent quasiparticle and consequently those standard band-structure methods fail even at a qualitative level. One of the most powerful approaches for strong correlations is the dynamical mean-field theory (DMFT), which has enlightened the understanding of the Mott transition based on the Hubbard model. For realistic applications, the dynamical mean-field theory is combined with various independent-particles approaches. The most widely used one is the DMFT combined with the DFT in the local density approximation (LDA), so-called LDA+DMFT. In this approach, the electrons in the weakly correlated orbitals are calculated by LDA while others in the strongly correlated orbitals are treated by DMFT. Recently, the method combining DMFT with Hedin's GWGWGW approximation was also developed, in which the momentum-dependent self-energy is also added. In this thesis, we discuss the application of those methodologies based on DMFT. First, we apply the dynamical mean-field theory to solve the 3-dimensional Hubbard model in Chap. 3. In this application, we model the interface between the thermodynamically coexisting metal and Mott insulator. We show how to model the required slab geometry and extract the electronic spectra. We construct an effective Landau free energy and compute the variation of its parameters across the phase diagram. Finally, using a linear mixture of the density and double-occupancy, we identify a natural Ising order parameter which unifies the treatment of the bandwidth and filling controlled Mott transitions. Secondly, we study the double-counting problem, a subtle issue that arises in LDA+DMFT. We propose a highly precise double-counting functional, in which the intersection of LDA and DMFT is calculated exactly, and implement a parameter-free version of the LDA+DMFT that is tested on one of the simplest strongly correlated systems, the H2 molecule. We show that the exact double-counting treatment along with a good DMFT projector leads to very accurate and total energy and excitation spectrum of H2_22​ molecule. Finally, we implement various versions of GWGWGW+DMFT, in its fully self-consistent way, one shot GW approximation, and quasiparticle self-consistent scheme, and studied how well these combined methods perform on H2_22​ molecule as compared to more established methods such as LDA+DMFT. We found that most flavors of GW+DMFT break down in strongly correlated regime due to causality violation. Among GW+DMFT methods, only the self-consistent quasiparticle GW+DMFT with static double-counting, and a new method with causal double-counting, correctly recover the atomic limit at large H-atom separation. While some flavors of GW+DMFT improve the single-electron spectra of LDA+DMFT, the total energy is best predicted by LDA+DMFT, for which the exact double-counting is known, and is static.
A new scheme of first-principles computation for strongly correlated electron systems is proposed. This scheme starts from the local-density approximation (LDA) at high-energy band structure, while the low-energy effective Hamiltonian is constructed by a downfolding procedure using combinations of the constrained-LDA and the GW method. The obtained low-energy Hamiltonian is solved by the path-integral renormalization-group method, where spatial and dynamical fluctuations are fully considered. An application to Sr2VO4 shows that the scheme is powerful in agreement with experimental results. It further predicts a nontrivial orbital-stripe order.
In Chapter 2, we pointed out that although the Kohn–Sham (KS) eigenvalues provide a good zeroth-order approximation for the single-particle excitation energies, LDA/GGA fails to give a satisfactory description of the fundamental band gaps in semiconductors and insulations. The many-body Green function theory (or otherwise called many-body perturbation theory), on the other hand, provides the formal basis for evaluating the experimentally observed quasi-particle band structures. Nowadays, it has become routine practice to resort to this many-body perturbation theory (especially within its so-called “ GW approximation”) for the descriptions of the single-particle excitation in real poly-atomic systems. Because of this, we will present an overview of the Green function method in the many-body electronic systems, with a special emphasis on the GW approximation in this chapter.