In this paper, we tackle the physical-layer security issue in MISO wiretap channel considering the pilot-assisted channel estimation at the receiver side. Unlike the conventional schemes, we introduce the cooperative jamming scheme that transmits artificial noise (AN) only on downlink pilot transmission phase. In order to disrupt the channel estimation at the eavesdropper (Eve) effectively, an optimal beamforming at the cooperative jammer (CJ) was obtained by means of difference-of-convex (DC) algorithm and rank relaxation. In addition, with focus on the energy budget limitation issue at the CJ, energy efficiency at the CJ is verified based on the circuit power consumption model. Numerical results provide a performance comparison with a conventional scheme, which transmits AN only in data transmission phase.
In this paper, we tackle the physical-layer security issue in MISO wiretap channel considering the pilot-assisted channel estimation at the receiver side. Unlike the conventional schemes, we introduce the cooperative jamming scheme that transmits artificial noise (AN) only on downlink pilot transmission phase. In order to disrupt the channel estimation at the eavesdropper (Eve) effectively, an optimal beamforming at the cooperative jammer (CJ) was obtained by means of difference-of-convex (DC) algorithm and rank relaxation. In addition, with focus on the energy budget limitation issue at the CJ, energy efficiency at the CJ is verified based on the circuit power consumption model. Numerical results provide a performance comparison with a conventional scheme, which transmits AN only in data transmission phase.
In this paper, we consider the multiple-input single-output (MISO) wiretap channel with a cooperative jammer (CJ). Motivated by the fact that corrupting pilot signals can effectively degrade the channel estimation at the eavesdropper (Eve), we emphasize that the physical-layer security can be enhanced by introducing jamming signals in pilot phase. Therefore, we propose a cooperative jamming scheme which delivers artificial noise (AN) both in pilot and data phases, unlike the conventional schemes that transmit AN only in data phase. More specifically, we optimize the jamming power allocation between pilot phase and data phase, along with designing the beamforming vector at the CJ. Furthermore, considering the limitation of energy budget at the CJ, the energy efficiency of the proposed scheme is investigated based on the circuit power consumption model. Finally, numerical results verify the performance of the proposed scheme, in terms of secrecy rate and energy efficiency.
Tackling the physical layer secrecy issue, existing studies on cooperative jamming generally assume the persistent jamming and perfect channel estimation at the receiver side. However, these two assumptions are incompatible since jamming signals can corrupt the pilot symbols. In addition, due to the energy budget limitation, persistent jamming is burdensome to the cooperative jammers. To address these issues, we propose a cooperative jamming strategy that designs the jamming symbols aiming only at the pilot signals to attain security improvement by manipulating the channel estimations at the authorized receiver and the eavesdropper simultaneously. Via computer simulations, we compare the performance of the proposed strategy with that of a conventional persistent artificial noise-aided strategy, and these results demonstrate that the proposed strategy achieves substantial secrecy rate gain in wide region, especially at the low data transmission power regime and at the rank-deficient environment.
Achieving secure transmission in wireless network is a significantly important research topic. Classic cryptography encrypts a confidential message to an unreadable cipher message. Thus only the authentic receiver with correct secrecy key is able to decrypt the message. However, with the growing computational capability of adversaries, the requirement of secrecy key generation and distribution is getting stringent. Another method to achieve wireless security, which has attracted much attention in recent years, is through physical layer processing, named physical layer security. In a typical wiretap channel model consisting of a transmitter, a legal receiver and an adversary (illegal receiver), early works have proven that it is possible to achieve positive secrecy rate using multiple antenna techniques, such as beamforming, at the transmitter. In this thesis, we focus on two types of malicious behaviors of the adversary: passive eavesdropping and active attack. For the passive eavesdropping, we first consider the multi-input-single-output (MISO) wiretap channel, in which the legitimate transmitter utilizes the artificial noise aided precoding strategy to maximize the achievable secrecy rate of the channel. Both scenarios of known and unknown channel state information (CSI) for the eavesdropper channels are considered. By deriving the closed-form expression of ergodic secrecy rate, we prove that there exists an optimal power ratio between the information signal and the artificial noise. We then extend our study to a four-node fading channel model in a wireless relay network, which includes two single-antenna users, one single-antenna eavesdropper and one relay node equipped with multiple antennas. By studying the decode-and-forward (DF) scheme, cooperative jamming (CJ) scheme and one proposed hybrid relay scheme, relay-and-jamming (RJ), we aims to find the optimal relay scheme with the condition that the transmitter and the relay node are under individual power constraints and the CSI of the illegitimate channel is only statistically known. Our analysis shows that the hybrid RJ scheme is optimal when the transmitter has a relatively small power budget and/or the transmitter is far away from the intended receiver. Besides the passive eavesdropping, the adversary could also choose the active attack. The pilot spoofing attack is one active attack conducted by the adversary during the channel estimation phase of the legitimate transmission. In practical systems, the pilot signals are usually known \textit{a priori} and repeatedly used information. In this attack, an intelligent adversary spoofs the transmitter on the estimation of CSI by sending the identical pilot signal as the legitimate receiver. By doing so, the adversary could obtain a larger channel rate in the data transmission phase, and also drastically weaken the strength of the received signal at the legitimate receiver if the adversary utilizes large enough power. Due to the serious consequences caused by such an attack, we first propose an energy ratio detector (ERD) that explores the asymmetry of received signal power levels at the transmitter and the legitimate receiver when the attack occurs. Our analysis shows that the ERD could provide very high probability of detection with certain requirement on the false alarming probability. Furthermore, we design a two-way training based scheme to provide not only attack detection but also secure transmission. The two-way training based detector (TWTD) exploits the intrusive component created by the adversary, followed by a secure beamforming-assisted data transmission. In addition to the good detection performance, our scheme could estimate both legitimate and illegitimate channels, with which the beamforming could be designed for data transmission.
Cooperative jamming approach has been commonly used in the field of physical layer security to achieve a good secrecy rate of wireless networks. In this approach, the Gaussian noise signal sent by a friendly jammer can disrupt the reception of the eavesdropper, however, it may also interfere with the legitimate receiver. In this paper, we propose a novel approach, namely, information jamming, to go beyond the secrecy rate achieved by the traditional cooperative jamming approach in a multiple-input single-output (MISO) wiretap channel. We propose that a multi-antenna friendly jammer transmits the source message rather than Gaussian noise signal for simultaneously enhancing the signal strength at the legitimate receiver and canceling the received signal at the eavesdropper. In particular, we aim to maximize the achievable secrecy rate by optimizing the information jammer's beamforming vector. Though the optimization problem is non-convex, we successfully solve it optimally via a two-stage based numerical approach. To gain more useful analytical results, we also propose two suboptimal jamming schemes with low computation, by targeting at improving the legitimate reception and avoiding the eavesdropping, respectively. Finally, numerical results show that the proposed information jamming approach significantly helps go beyond the secrecy rate of the existing cooperative jamming approach, especially when the transmit power of the jammer is large enough.
Cooperative jamming is a widely used approach for improving the security of wireless networks. In this approach, a friendly jammer sends jamming signals to disrupt the reception of the eavesdropper, which inevitably interferes with the legitimate receiver. In this paper, we propose a novel approach, namely, information jamming, to exceed the secrecy rate achieved by the traditional cooperative jamming approach in a multiple-input single-output (MISO) wiretap channel. We propose that multiple multi-antenna information jammers (iJammers) transmit the source signals of the legitimate transmitter rather than independent noise signals for simultaneously enhancing the signal strength at the legitimate receiver and canceling the received signal at the eavesdropper. Specifically, we aim at maximizing the achievable secrecy rate by jointly optimizing the beamforming vectors at Alice and iJammers, subject to the individual transmit power constraints. We first propose a semi-definite relaxation based approach to solve the original non-convex problem optimally. For ease of implementation, we then provide a suboptimal distributed information beamforming scheme, whose optimal solution is obtained in closed-form. Finally, we extend our study to the imperfect channel state information case. Simulation results show that our proposed information jamming approach significantly outperforms the traditional cooperative jamming approach in terms of achievable secrecy rate.
Internet of Things (IoT) is becoming an emerging paradigm to achieve ubiquitous connectivity, via massive deployment of physical objects, such as sensors, controllers, and actuators. However, concerns on the IoT security are raised due to the wireless broadcasting nature and the energy constraint of the physical objects. In this paper, we study secure downlink transmission from a controller to an actuator, with the help of a cooperative jammer to fight against multiple passive and noncolluding eavesdroppers. In addition to artificial noise aided secrecy beamforming for secure transmission, cooperative jamming (CJ) is explored to further enhance physical layer security. In particular, we provide a secrecy enhancing transmit design to minimize the secrecy outage probability (SOP), subject to a minimum requirement on the secrecy rate. Based on a strict mathematical analysis, we further characterize the impacts of the main channel quality and the minimum secrecy rate on transmit designs. Numerical results confirm that our design can enhance both security (in terms of SOP) and power efficiency as compared with the approach without CJ.