Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Globecom

Physical Layer Secret Key Capacity Using Correlated Wireless Channel Samples

Xu Wang, Liang Jin, Kaizhi Huang, Mingliang Li, Yi Ming

Published Dec 1, 2016• 9 citations
Publisher

Abstract

When extracting physical layer security secret key with multiple wireless channel samples, its capacity is affected by the time difference of channel sounding, terminal's moving speed, sampling period, the number of samples, and additive noise. In order to quantitatively analyze their effects and determine the constrains on the optimal sampling period, a closed-form solution to the physical layer secret key capacity in the time domain is derived over the uniform scattering environment. Simulation results indicate that the results of this paper can be applied to both the uniform and non-uniform scattering environment. Furthermore, the feasibility to extract physical layer secret key from the commercial TD-LTE and the promising co-frequency co- time full duplex communication systems is verified.

DOI
10.1109/glocom.2016.7842141

Related papers

Physical Layer Secret Key Capacity Based on Wireless Channel Parameters

Wang Xu Jin, Liang Song Huawei Huang, Kaizhi

Physical layer secret key capacity is affected by such factors as additive noise, the time difference of channel sampling, terminal's moving speed, sampling period, and the number of samples, whose effects on the physical layer secret key capacity are analyzed quantitatively using the single-input single-output wireless channel over the uniform scattering environment. Specifically, a closed-form solution to the secret key capacity is derived to determine the constraints on the optimal sampling period. Analysis and simulation results reveal that the results can also be applied to the nonuniform scattering environment. Furthermore, the feasibility to utilize the physical layer secret key extraction techniques in the mobile communication systems is verified.

•Jan 1, 2016•1 citation

Physical Layer Secret Key Capacity of Two Moving Terminals

Xu Wang, Mingliang Li, Liang Jin +1 more

When extracting secret key from shared wireless channel between two legitimate moving terminals, its capacity is affected by the time difference of channel sampling, terminal's mobility, and additive noise. In order to quantitatively analyze their effects, a closed-form solution to physical layer secret key capacity in the time domain is derived over the uniform scattering environment. Afterwards, simulations in the uniform and non-uniform scattering environment are carried out to demonstrate its validity and applicability, respectively. Simula-tion results show that the derivation can be utilized to provide theoretical reference for physical layer secret key extraction between two moving terminals located among dense scatters.

IEEE Vehicular Technology Conference•Jun 1, 2017•0 citations

A two-step decorrelation method on time-frequency correlated channel for secret key generation

Zijie Ji, Zunwen He, Yan Zhang +1 more

Secret key generation based on channel reciprocity is an important branch of wireless physical layer security which provides strong or even theoretically perfect secret. With the pursuit of higher secret key rate, the time-frequency joint key extraction schemes have been recently considered, which can exploit simultaneously the resources contained in the frequency and time domains. However, the strong correlation existing between the broadband time-variant channel samples makes the decorrelation process indispensable before quantization. Due to the large size of these channel sample matrices, decorrelation methods based on full channel covariance matrix corresponding to high calculation complexity are difficult to deploy in realistic mobile communication systems. In this work, we propose a method which separates the decorrelation of time-frequency correlated channel characteristics into two steps. The performance of this proposed method is evaluated through both standardized channel model and practical measurements. It is shown that the decorrelation of samples with the two-step method could be close to that based on the full channel covariance matrix, as well as leading to a dramatical reduction on the calculation complexity. The impact of the signal-to-noise-ratio (SNR) on the secret key rate is analyzed, and no distinct difference is shown in this aspect between these two methods.

IEEE Wireless Communications and Networking Conference•Apr 1, 2018•4 citations

On secret key generation from multiple observations of wireless channels

Kang Liu, Serguei L. Primak, Xianbin Wang

Secret key generation at physical layer has attracted more and more attentions as an emerging cryptography method. Compared to traditional security approaches, secret key generation at physical layer not only avoids the problem of key distribution, but also holds high efficiency and low complexity in application. Based on the principle of channel reciprocity, Alice and Bob both estimate the channel conditions and extract shared keys from this source of common randomness. In this paper, we first analyze the basic steps (channel estimation, sample quantization and key reconciliation) of secret key generation, key match rate with different quantization levels and key reconciliation times are also simulated. While in practical situations, different non-reciprocity factors affect the channel estimation step, key match rate can be greatly decreased and hardly meet real time cryptography requirements. In order to increase the key match rate, the unified framework of physical layer key generation has been extended to utilizing multiple observations of wireless channels to generate secret keys. An improved key generation approach with multiple observations can well deal with discrepancies between transceivers and keep increasing the key match rate. Theoretical analysis and simulation results both validate the significant improvement due to multiple observations. With an increased number of observations on both sides, the desired key match rate can be achieved much greater than with a single observation, and also the probability of key recovery by Eve can be decreased.

IEEE International Conference on Communication Systems (ICCS)•Nov 1, 2014•6 citations

Secret Key Capacity of Key Generation in the Slow-Fading Wireless Channels

Yuang Zhang, Liquan Chen, Yufan Song +1 more

This paper investigates the secret key capacity of key generation in the slow-fading wireless channel by considering the temporal correlation between channel measurements in the previous and current frame. We derive the analytical expression of secret key capacity in the slow-fading channel, and propose the design guideline for practical key generation schemes in slow fading channel environments. We systematically analyze the impact of all corresponding parameters on secret key capacity, including sampling period, sampling delay, eavesdroppers' location, signal-to-noise ratio, Doppler spread, and pilot length. Theoretical and simulation results indicate that secret key capacity in the slow fading channel is affected by frame-to-frame correlation and increasing transmission power or sampling period can suppress this effect.

IEEE Wireless Communications and Networking Conference•Mar 24, 2025•0 citations

Threat on Physical Layer Security: Side Channel vs. Wiretap Channel

Peng Hui Luo, Huiyun Li, Guoqing Xu +1 more

The location-specific channel state information can be exploited to generate secret keys for wireless system services, In the multipath wireless environment. Its secrecy capacity was usually studied with the wiretap channel model. This paper proposes a side channel model which is even more threatening to the security of the physical layer randomness based secret keys. We present the information-theoretic analysis of the side channel model, and compare it with the wire-tap model. The analysis indicates that the secret key capacity of the side-channel will be lower than that of the wire-tap channel, especially with a fading scenario. We conduct MATLAB simulation of physical layer randomness based key generation and SPICE simulation of key extraction to observe the side channel leakage of the circuit. The simulation results confirm the consistency of the key bits, thus verifying the feasibility of our proposed side-channel attack scheme against the physical layer security.

IEEE International Conference on Computational Science and Engineering (CSE)•Dec 1, 2013•3 citations
When extracting physical layer security secret key with multiple wireless channel samples, its capacity is affected by the time difference of channel sounding, terminal's moving speed, sampling period, the number of samples, and additive noise. In order to quantitatively analyze their effects and determine the constrains on the optimal sampling period, a closed-form solution to the physical layer secret key capacity in the time domain is derived over the uniform scattering environment. Simulation results indicate that the results of this paper can be applied to both the uniform and non-uniform scattering environment. Furthermore, the feasibility to extract physical layer secret key from the commercial TD-LTE and the promising co-frequency co- time full duplex communication systems is verified.
Physical layer secret key capacity is affected by such factors as additive noise, the time difference of channel sampling, terminal's moving speed, sampling period, and the number of samples, whose effects on the physical layer secret key capacity are analyzed quantitatively using the single-input single-output wireless channel over the uniform scattering environment. Specifically, a closed-form solution to the secret key capacity is derived to determine the constraints on the optimal sampling period. Analysis and simulation results reveal that the results can also be applied to the nonuniform scattering environment. Furthermore, the feasibility to utilize the physical layer secret key extraction techniques in the mobile communication systems is verified.
When extracting secret key from shared wireless channel between two legitimate moving terminals, its capacity is affected by the time difference of channel sampling, terminal's mobility, and additive noise. In order to quantitatively analyze their effects, a closed-form solution to physical layer secret key capacity in the time domain is derived over the uniform scattering environment. Afterwards, simulations in the uniform and non-uniform scattering environment are carried out to demonstrate its validity and applicability, respectively. Simula-tion results show that the derivation can be utilized to provide theoretical reference for physical layer secret key extraction between two moving terminals located among dense scatters.
Secret key generation based on channel reciprocity is an important branch of wireless physical layer security which provides strong or even theoretically perfect secret. With the pursuit of higher secret key rate, the time-frequency joint key extraction schemes have been recently considered, which can exploit simultaneously the resources contained in the frequency and time domains. However, the strong correlation existing between the broadband time-variant channel samples makes the decorrelation process indispensable before quantization. Due to the large size of these channel sample matrices, decorrelation methods based on full channel covariance matrix corresponding to high calculation complexity are difficult to deploy in realistic mobile communication systems. In this work, we propose a method which separates the decorrelation of time-frequency correlated channel characteristics into two steps. The performance of this proposed method is evaluated through both standardized channel model and practical measurements. It is shown that the decorrelation of samples with the two-step method could be close to that based on the full channel covariance matrix, as well as leading to a dramatical reduction on the calculation complexity. The impact of the signal-to-noise-ratio (SNR) on the secret key rate is analyzed, and no distinct difference is shown in this aspect between these two methods.
Secret key generation at physical layer has attracted more and more attentions as an emerging cryptography method. Compared to traditional security approaches, secret key generation at physical layer not only avoids the problem of key distribution, but also holds high efficiency and low complexity in application. Based on the principle of channel reciprocity, Alice and Bob both estimate the channel conditions and extract shared keys from this source of common randomness. In this paper, we first analyze the basic steps (channel estimation, sample quantization and key reconciliation) of secret key generation, key match rate with different quantization levels and key reconciliation times are also simulated. While in practical situations, different non-reciprocity factors affect the channel estimation step, key match rate can be greatly decreased and hardly meet real time cryptography requirements. In order to increase the key match rate, the unified framework of physical layer key generation has been extended to utilizing multiple observations of wireless channels to generate secret keys. An improved key generation approach with multiple observations can well deal with discrepancies between transceivers and keep increasing the key match rate. Theoretical analysis and simulation results both validate the significant improvement due to multiple observations. With an increased number of observations on both sides, the desired key match rate can be achieved much greater than with a single observation, and also the probability of key recovery by Eve can be decreased.
This paper investigates the secret key capacity of key generation in the slow-fading wireless channel by considering the temporal correlation between channel measurements in the previous and current frame. We derive the analytical expression of secret key capacity in the slow-fading channel, and propose the design guideline for practical key generation schemes in slow fading channel environments. We systematically analyze the impact of all corresponding parameters on secret key capacity, including sampling period, sampling delay, eavesdroppers' location, signal-to-noise ratio, Doppler spread, and pilot length. Theoretical and simulation results indicate that secret key capacity in the slow fading channel is affected by frame-to-frame correlation and increasing transmission power or sampling period can suppress this effect.
The location-specific channel state information can be exploited to generate secret keys for wireless system services, In the multipath wireless environment. Its secrecy capacity was usually studied with the wiretap channel model. This paper proposes a side channel model which is even more threatening to the security of the physical layer randomness based secret keys. We present the information-theoretic analysis of the side channel model, and compare it with the wire-tap model. The analysis indicates that the secret key capacity of the side-channel will be lower than that of the wire-tap channel, especially with a fading scenario. We conduct MATLAB simulation of physical layer randomness based key generation and SPICE simulation of key extraction to observe the side channel leakage of the circuit. The simulation results confirm the consistency of the key bits, thus verifying the feasibility of our proposed side-channel attack scheme against the physical layer security.