Single-photon detectors have been widely used in many vital fields, such as quantum teleportation and quantum computation. Compared with other single-photon detectors, superconducting nanowire single-photon detector exhibits relatively wide response spectrum, low dark count rate and high detection efficiency. The principle of superconducting nanowire single-photon detector is demonstrated, especially on the process of the generation and the diffusion of the hotspot, and the simulation is done to illustrate this process. Many important parameters of superconducting nanowire single-photon detector are measured, such as R-T curve and photon response. Through the analysis of experimental data, the approach to improve the performance of superconducting nanowire single-photon detector is proposed.
We use quantum detector tomography to investigate the detection mechanism in WSi nanowire superconducting single photon detectors. To this purpose, we fabricated a 250 nm wide and 250 nm long WSi nanowire and measured its response to impinging photons with wavelengths ranging from λ = 900 nm to λ = 1650 nm. Tomographic measurements show that the detector response depends on the total excitation energy only. Moreover, for total absorbed energies >0.8 eV the current–energy relation is linear, similar to what was observed in NbN nanowires, whereas the current–energy relation deviates from linear behavior for total energies below 0.8 eV.