Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE Photonics Conference

Tunable wavelength converter using cascade of sum frequency mixing and difference frequency mixing in quasi-phase matched lithium niobate

Yutaka Fukuchi

Published Oct 1, 2016• 1 citation
Publisher

Abstract

We investigate bandwidth limitation of tunable wavelength conversion from an arbitrary wavelength to another arbitrary one using the cascaded second-order nonlinear effect in quasi-phase matched lithium niobate waveguides. Critical pulse width to be wavelength-converted is proportional to the device length, and its ratio is 1.6ps/cm.
DOI
10.1109/ipcon.2016.7831240

Related papers

Improved cascaded sum and difference frequency generation-based wavelength converters in low-loss quasi-phase-matched lithium niobate waveguides

Amirhossein Tehranchi, Raman Kashyap

We numerically evaluate the wavelength converters based on cascaded sum and difference frequency generation in quasi-phase-matched lithium niobate waveguides with and without loss. A technique is also proposed to flatten the response by increased detuning of the pump wavelength. We present the criteria for the design of waveguide length and the assignment of pump power to achieve the desired efficiency, ripple and bandwidth, assuming a large pump wavelength difference of 75 nm.

Applied Optics•Oct 22, 2009•10 citations

Wavelength Converter Based on Linearly Chirped Gratings in Lithium Niobate Through Cascaded Second-Order Processes

Shiming Gao, Changxi Yang, Jin Guo-Fan

We report a wavelength converter based on linearly chirped gratings in a lithium niobate crystal through cascaded second-order nonlinear processes. The influence of the chirp coefficient on the conversion bandwidth and the efficiency is analysed. The exact phase matching point is optimized at the 0.33 times of the waveguide total length. When the waveguide length is 3 cm, the bandwidth of the linearly chirped grating increases 42% with the efficiency penalty of 1.7 dB compared with the periodic grating. At the same mean conversion efficiency of -1.4 dB via adjusting the waveguide total lengths, the bandwidth of the linearly chirped grating is 36% broader than the periodic grating.

Chinese Physics Letters•Jul 30, 2003•6 citations

All-Optical Wavelength Conversion Based on the Cascaded Sum and Difference Frequency Generation in a Periodically Poled Lithium-Niobate Waveguide

Jian Wang

The principle of all-optical wavelength conversion based on the cascaded sum and difference frequency generation (SFG+DFG) in quasi-phase-matched (QPM) periodically poled LiNbO3 (PPLN) waveguides is introduced. The conversion efficiency of the wavelength converter is calculated. The influences of the powers and span of two pumps on the conversion efficiency are analyzed. Bandwidth of one pump wavelength is discussed. The tuning is about 0.5 nm. The signal pulse width is compressed about 0.68 times.

Optics & Optoelectronic Technology•Jan 1, 2007•0 citations

Efficient wavelength shifting over the erbium amplifier bandwidth via cascaded second order processes in lithium niobate waveguides

Katia Gallo, Gaetano Assanto, G. I. Stegeman

We investigate two schemes for wavelength conversion based on the cascading of two successive second order processes in a quasi-phase-matched lithium niobate channel waveguide. Efficient conversion over the full erbium amplifier bandwidth is possible with a single multi-hundred milliwatt pump laser operating around 1.55 μm.

Applied Physics Letters•Aug 25, 1997•106 citations

Flattop broadband wavelength converters based on double-pass cascaded SFG + DFG in quasi-phase matched waveguides

Amirhossein Tehranchi, Raman Kashyap

Wavelength converters based on double-pass quasi-phase matched cascaded sum and difference frequency generation in lossy lithium niobate waveguides with a large pump wavelength difference are numerically evaluated assuming pump wavelength detuning to flatten the response.

IEEE Lasers and Electro-Optics Society Annual Meeting (LEOS)•Oct 1, 2009•0 citations

Single-to-Multiple Channel Wavelength Conversions and Tuning of Picosecond Pulses in Quasi-Phase-Matched Waveguides

Jian Wang, Junqiang Sun, Luo Chuan-hong +3 more

We report the single-to-multiple channel wavelength conversions of 1.57-ps pulses based on cascaded second-harmonic generation and difference frequency generation in quasi-phase-matched periodically poled lithium niobate waveguides. For single-to-single channel wavelength conversion, no external cavity laser is required with use of a fibre ring laser. The conversion efficiency is about -21.44 dB. The converted idler wavelength can be tuned from 1526.4 nm to 1537.5 nm as the lasing pump wavelength is varied from 1566.1 nm to 1555.0 nm. By employing several input pumps, tunable single-to-dual and single-to-triple channel wavelength conversions are experimentally demonstrated.

Chinese Physics Letters•Jun 28, 2006•9 citations
We report a wavelength converter based on linearly chirped gratings in a lithium niobate crystal through cascaded second-order nonlinear processes. The influence of the chirp coefficient on the conversion bandwidth and the efficiency is analysed. The exact phase matching point is optimized at the 0.33 times of the waveguide total length. When the waveguide length is 3 cm, the bandwidth of the linearly chirped grating increases 42% with the efficiency penalty of 1.7 dB compared with the periodic grating. At the same mean conversion efficiency of -1.4 dB via adjusting the waveguide total lengths, the bandwidth of the linearly chirped grating is 36% broader than the periodic grating.
The principle of all-optical wavelength conversion based on the cascaded sum and difference frequency generation (SFG+DFG) in quasi-phase-matched (QPM) periodically poled LiNbO3 (PPLN) waveguides is introduced. The conversion efficiency of the wavelength converter is calculated. The influences of the powers and span of two pumps on the conversion efficiency are analyzed. Bandwidth of one pump wavelength is discussed. The tuning is about 0.5 nm. The signal pulse width is compressed about 0.68 times.
We report the single-to-multiple channel wavelength conversions of 1.57-ps pulses based on cascaded second-harmonic generation and difference frequency generation in quasi-phase-matched periodically poled lithium niobate waveguides. For single-to-single channel wavelength conversion, no external cavity laser is required with use of a fibre ring laser. The conversion efficiency is about -21.44 dB. The converted idler wavelength can be tuned from 1526.4 nm to 1537.5 nm as the lasing pump wavelength is varied from 1566.1 nm to 1555.0 nm. By employing several input pumps, tunable single-to-dual and single-to-triple channel wavelength conversions are experimentally demonstrated.