A new kind of integrated circuit that steers atoms rather than electrons has been developed by a team of researchers from Austria and Sweden. The chip built by Jörg Schmiedmayer of the University of Innsbruck and co-workers is extremely simple compared with commercial electronic devices, and consists of just a few currentcarrying wires etched on a gallium-arsenide substrate. The electrical currents produce a complex magnetic-field pattern that is used to manipulate the motion of cold atoms floating above the chip – an exciting achievement (R Folman et al. 2000 Phys. Rev. Lett. 84 4749).
A new kind of integrated circuit that steers atoms rather than electrons has been developed by a team of researchers from Austria and Sweden. The chip built by Jörg Schmiedmayer of the University of Innsbruck and co-workers is extremely simple compared with commercial electronic devices, and consists of just a few currentcarrying wires etched on a gallium-arsenide substrate. The electrical currents produce a complex magnetic-field pattern that is used to manipulate the motion of cold atoms floating above the chip – an exciting achievement (R Folman et al. 2000 Phys. Rev. Lett. 84 4749).
Cold atoms promise versatile atomic chipsUsing a microelectronic chip to hold a cloud of cold atoms hovering above it, physicists in Germany may have developed an "atomic chip" that might eventually shunt Bose-Einstein condensates around an atom chip -just as electrons are shunted around a conventional silicon chip.This tiny circuit creates and manipulates a peculiar state of matter called a Bose-Einstein condensate (p21).Previously these condensates were made using light or magnetic fields to cool and confine a gas of atoms.Electric currents travelling through wires in the atom chip create a confining magnetic field barely 1 mm wide.This field holds a cloud of 1600 rubidium atoms at a height of less than a tenth of 1 mm above the chip surface.Quantum mechanics dictates that atoms, being so small, have wavelike properties.Normally each wave bobs up and down independently.However, in a Bose-Einstein condensate all of the atomic waves are "coherent" -moving in step, in the same quantum state.Instead of behaving like a
Atom chips are robust and extremely powerful toolboxes for quantum optical experiments, since they make it possible to create exceedingly precise magnetic traps for neutral atoms with minimal field modulations. Accurate manipulation of trapped atoms is feasible with magnetic and electric fields created on the atom chip. Therefore atom chips with high quality surfaces and extremely well defined wires were build (roughness < 20nm). Furthermore new generations of atom chips were developed, like the multi-layer atom chip with contact-free wire crossings, the sub-micron structured atom chip and the semiconducting atom chip. Extensive characterisation measurements of atom chip wires demonstrated that the wires stand current densities of up to 10^7A/cm^2 for seconds and voltage differences of more than 500V over 10µm. From the different materials tested doped silicon with a thin silicon dioxide layer is the best qualified substrate for atom chip fabrication. The atom chips fabricated during this thesis have been used in many successful experiments, yielding numerous results. Moreover this thesis established the basics for many further experiments in atom physics and quantum optics and delivers complete instructions for the fabrication of all developed atom chips as well as an introduction to the experiments.
The laser cooling, trapping and manipulating of neutral atoms has become a valuable tool for scientists, providing innovative ways to probe the nature of reality and giving rise to transformative devices in the fields of precise measurement and quantum information processing. Unlike traditional complex and bulky atomic experimental facilities, atom chips, through the design, fabrication of surface-patterned microstructures, and the integration of devices on the substrates, can precisely control the magnetic, electric or optical fields on a micro-nano scale with low power consumption. It can realize strong trapping as well as coherent atomic manipulation. Since atom chip was first proposed twenty years ago, it has built a robust quantum platform for miniaturizing and integrating quantum optics and atomic physics tools on a chip. In this paper, first, we briefly review the development history of atom chips, then introduce the basic knowledge of micro potential traps and micro guides based on on-chip current-carrying wires. Afterwards, the key technologies about the chip material, design, fabrication, characterization and integration of atom chips are discussed in detail. We not only focus on the currently most active and successful areas - current carrying wires, but also look at more visionary approaches such as to the manipulation of atoms with real nano structures, say, carbon nano tubes. The design and fabrication principles of ideal atom chips are discussed as well. In the forth part, the worldwide plans and research projects involving with atom chip technologies are summarized, showing that many countries see this as an important foundational technology. Following that, the major developments in the application fields including atom clocks, atom interferometer gyroscope, cold atom gravimeter, etc are described. Finally, the challenges faced by atom chips towards practical application are pointed out and the prospects for their subsequent development are depicted.
Summary form only given. Neutral-atom manipulation using integrated micro-devices is a new extremely promising experimental approach to QIPC. In devices we call Atom Chips, atoms are trapped or move in microscopic potentials above a surface. The traps, guides, are formed by potentials created using electric, magnetic and light fields which originate in (microscopic) structures built on the surface of the Atom Chip. To execute a QIPC toolbox we plan to implement quantum optics techniques using integrated micro devices fabricated on the Atom Chip. We describe our recent experimental progress towards this goal, demonstrating the realisation of traps and guides for neutral atoms on a nanofabricated chip.
Summary form only given. Neutral-atom manipulation using integrated micro-devices is a new extremely promising experimental approach to QIPC. In devices we call Atom Chips, atoms are trapped or move in microscopic potentials above a surface. The traps, guides, are formed by potentials created using electric, magnetic and light fields which originate in (microscopic) structures built on the surface of the Atom Chip. To execute a QIPC toolbox we plan to implement quantum optics techniques using integrated micro devices fabricated on the Atom Chip. We describe our recent experimental progress towards this goal, demonstrating the realisation of traps and guides for neutral atoms on a nanofabricated chip.