This paper is concerned with iterative decoding of short error correcting codes having high density parity check matrices (HDPC Codes). There is a need for reliable graph-based iterative decoding of short codes; for instance this is beneficial in the framework of a newly introduced random version of OFDMA (R-OFDMA) [1]. We first note how the structure of the parity check matrix can alter an iterative decoder's performance. Specifically we focus on the allowable redundancies in the matrices, where it is possible to benefit from inserting redundant parity checks without altering the code properties. We then employ computation tree analysis and density evolution which both support simulation results showing a performance improvement.
This paper is concerned with iterative decoding of short error correcting codes having high density parity check matrices (HDPC Codes). There is a need for reliable graph-based iterative decoding of short codes; for instance this is beneficial in the framework of a newly introduced random version of OFDMA (R-OFDMA) [1]. We first note how the structure of the parity check matrix can alter an iterative decoder's performance. Specifically we focus on the allowable redundancies in the matrices, where it is possible to benefit from inserting redundant parity checks without altering the code properties. We then employ computation tree analysis and density evolution which both support simulation results showing a performance improvement.
Recent advances in coding theory have uncovered the previously forgotten power of Low-Density Parity-Check (LDPC) codes. Their popularity can be related to their relatively simple iterative decoders and their potential to achieve high performance close to shannon limit. These make them an attractive candidate for error correcting application in communication systems. In this thesis, we focus our research on the iterative decoding algorithms for Low-Density Parity-Check codes and present an improved decoding algorithm. First, the graph structure of LDPC codes is studied and a graph-based search algorithm to find the shortest closed walk and shortest cycle for each node of the graph is proposed. Then, the Deterministic schedule is applied on nodes of the graph with the objective of preserving the optimality of the algorithms. Finally, Hybrid Switch-Type technique is applied on the improved algorithms to provide a desirable complexity/performance trade-off. Hybrid Technique and Deterministic schedule are combined for decoding regular and irregular LDPC codes. The performance and complexity of the decoder is studied for Sum-Product and Gallager A algorithms. The result is a flexible decoder for any available LDPC code and any combination of decoding algorithms based on the communication systems need. In this technique, we benefit the high performance of soft-decision algorithms and low complexity of hard-decision algorithms by changing the decoding rule after a few iterations. Hence, a desirable performance can be obtained with less average number of soft iterations. Moreover, all the nodes do not update messages in each iteration. As a result, the total number of computations is reduced considerably
We propose several improvements for Linear Programming (LP) decoding algorithms for High Density Parity Check (HDPC) codes. First, we use the automorphism groups of a code to create parity check matrix diversity and to generate valid cuts from redundant parity checks. Second, we propose an efficient mixed integer decoder utilizing the branch and bound method. We further enhance the proposed decoders by removing inactive constraints and by adapting the parity check matrix prior to decoding according to the channel observations. Based on simulation results the proposed decoders achieve near-ML performance with reasonable complexity.
Effective iterative decoding of short BCH codes faces two primary challenges: identifying an appropriate parity-check matrix and accelerating decoder convergence. To address these issues, we propose a systematic scheme to derive an optimized parity-check matrix through a heuristic approach. This involves a series of binary sum and row shift operations, resulting in a low-density, quasi-regular column weight distribution with a reduced number of shortest cycles in the underlying redundant Tanner graph. For the revised normalized min-sum decoder, we concurrently integrate three types of random permutations into the alternated messages across iterations, leading to significantly faster convergence compared to existing methods. Furthermore, by utilizing the iterative trajectories of failed normalized min-sum decoding, we enhance the reliability measurement of codeword bits with the assistance of a neural network model from prior work, which accommodates more failures for the post-processing of ordered statistics decoding. Additionally, we report the types of undetected errors for the design of iterative decoders for short BCH codes, which potentially challenge efforts to approach the maximum likelihood limit. Extensive simulations demonstrate that the proposed hybrid framework achieves an attractive balance between performance, latency, and complexity.
After the introduction of iterative coding, Low Density Parity Check (LDPC) codes have received a lot of attention due to their remarkable near Shannon-limit performance and practical decoder implementation. However, when employing an LDPC code for various applications, multiple issues do arise at the simulation, algorithm and implementation levels. The first issue is the performance evaluation of the iterative LDPC decoder in the very low Bit Error Rate (BER) regions. So far, no analytical tool has been developed to evaluate the performance of LDPC codes. Unfortunately standard Monte Carlo (MC) simulations cannot be used for performance estimation in these low BER regions due to prohibitive execution times. The second issue is the efficiency of the decoding algorithm. Due to the presence of short cycles in the bipartite graph, sum-product decoding algorithms lead to considerable performance loss for short block-length LDPC codes and produce error floors for longer codes. In addition, the iterative processing and estimation of soft probabilistic values with these algorithms result in very high computational complexity, which in turn impedes the adoption of LDPC codes for power constrained systems. Another prime objective is to design a high throughput decoder architecture which is capable of supporting multiple rates and variable code lengths within minimal area.
This work aims to address and provide solutions to the above problems. As a solution to the performance estimation problem of LDPC codes, a highly efficient and novel fast BER simulation technique is developed. At the algorithm level, a performance improvement and error floor avoidance method is introduced, and a computationally efficient algorithm is developed for the sum-product decoding of LDPC codes. And finally, at the architecture level, a high throughput multi-rate variable code length implementation is presented which, when implemented, efficiently minimizes device resources while alleviating the routing complexity of the decoder.
A generalization of Gallager's low-density parity-check codes is introduced, where as component codes single-error correcting Hamming codes are used instead of single-error detecting parity-check codes. Low-density (LD) parity-check codes were first introduced by Gallager in 1963. These codes are, in combination with iterative decoding, very promising for achieving low error probabilities at a reasonable cost. Results of computer simulations for long LD codes show, that a performance close to the Shannon capacity limit can be achieved. In this work, we consider a generalized version of low-density parity-check codes, where the decoding procedure can be based on the decoding of Hamming component codes.
A reliability-based iterative majority-logic decoding algorithm for regular low-density parity-check (LDPC) codes was recently proposed by Huang et al. In this paper we present an improved version of that algorithm by introducing a different reliability measure for each check-sum of the parity-check matrix, and taking it into account in the computation of the extrinsic information that is used to update the reliability measure of each received bit in each iteration. Some simulations results are given, which show that the new algorithm, while requiring very little additional computational complexity, not only achieves a considerable error performance gain over the standard one, but also, importantly, outperforms the iterative decoding based on belief propagation (IDBP), especially for short and medium block length finite-geometry (FG) LDPC codes.