Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

International Conference on Infrared, Millimeter, and Terahertz Waves (IRMMW-THz)

Terahertz spectrometer based on high temperature superconducting Josephson junction

Y. C. Xu, Weiwei Xu, Mei Yu, Fuziang Zhao, Jun Chen, Biaobing Jin, Lin Kang, Peiheng Wu

Published Sep 1, 2016• 0 citations
Publisher

Abstract

This paper presents a terahertz (THz) spectrometer based on high temperature superconducting Josephson junction. The YBa2Cu3O7(YBCO) bi-crystal Josephson junctions (JJS) with log-periodic antennas are used as detectors. In the low temperature, with the signal measurement, data acquisition and human-computer interactive system, the automatic measurement system of THz spectrometer is finally accomplished and realizes the measurement of the wide frequency range from 0.1THz to 2.5THz. The frequency resolution reaches 0.04GHz (@ 114GHz) and 2GHz (@ 1.78THz). The spectral line width (Δf) is preliminarily analyzed.

DOI
10.1109/irmmw-thz.2016.7758940

Related papers

THz Spectrometer Based on a Josephson Oscillator and a Cold-Electron Bolometer

Michael A. Tarasov, L. S. Kuzmin, Е. А. Степанцов +3 more

We have demonstrated a low temperature spectrometer operating in a wide range of frequencies from 100 GHz to 1.8 THz. The spectrometer has utilized unique properties of high-T c superconducting Josephson junctions and wideband response of sensitive Cold-Electron 13olometers (CEB). The voltage response of the CEB integrated with log-periodic and double-dipole antennas, has been measured using an oscillator consisting of high-T c Josephson junction integrated on separate substrate with a log-periodic antenna. The response of the bolometer with a double dipole antenna has resonance shape with maximum corresponding to the designed central frequency of 300 GHz. A voltage response of the bolometer up to 4 . 10 V/W corresponds to a technical noise equivalent power of the bolometer of 1.2 . 10 W/HZ 112 including bolometer and amplifier sources of noise. A high-T c Josephson junction operated at temperatures below 2 K shows advantages of high I cRii product that enhances the oscillation frequency to over 1.8 THz. The resolution of the spectrometer is determined by the linewidth of Josephson oscillations and for this temperature is of the order of 1 GHz.

Softwaretechnik-Trends•Jan 1, 2004•0 citations

Terahertz harmonic mixer based on HTS Josephson junction

Mei Yu, Weiwei Xu, Jin Shi +3 more

High temperature superconducting (HTS) Josephson junction (JJ) mixers are attractive candidates in receivers for terahertz (THz) communication due to their high sensitivity, wide bandwidth, low local oscillator (LO) power requirement and high harmonic numbers. The required LO frequencies and the cost can be greatly reduced when harmonic signals can be detected at high orders (more than 100). In this paper, up to 114thharmonic mixings is presented in a HTS bicrystal YBa2Cu3O7-δ(YBCO) JJ harmonic mixer coupled with a bowtie loaded meander antenna at 0.21 THz. HTS JJs will be promising high-order harmonic mixers for THz practical applications on reception or detection at THz bands.

International Conference on Infrared, Millimeter, and Terahertz Waves (IRMMW-THz)•Aug 29, 2021•0 citations

Submillimeter-wave Josephson spectroscopy

Michael A. Tarasov, A. Shul’man, O. Yu. Polyanskii +7 more

A Josephson high-temperature superconducting (HTSC) submillimeter-wave spectrometer is designed, built, and experimentally investigated. The integrated detection structure of the spectrometer includes a YBCO Josephson junction on a bicrystalline boundary, a double-slot or log-periodic antenna, and a low-inductance resistive shunt. The selective detector response and the response at an intermediate frequency of 1.4 GHz are measured under the action of a signal in the frequency range 350–1250 GHz. Three methods of spectroscopy are investigated using this setup: 1) a method of Hilbert spectroscopy with processing of the detector response is implemented; 2) it is found that for a wide Josephson line at intermediate frequency (IF) the response has the same form as the detector response, making it possible to obtain a spectrum and the width of the generation line from IF response measurements; 3) for a narrow Josephson line the IF response corresponds to the regime of conversion with self-pumping. A new method is proposed for calculating the emission spectrum. The method consists of simple shift, summation, and subtraction operations. The advantages of the method are simplicity, high sensitivity, and high resolution.

Journal of Experimental and Theoretical Physics Letters•Sep 1, 1999•4 citations

Terahertz transmission spectroscopy by Josephson oscillator and cold-electron bolometer

Michael A. Tarasov, L. S. Kuzmin, Evgueni Stepantsov +4 more

For sensitive wideband spectroscopy at TeraHertz frequencies one needs a wide-range electrically tunable THz source and a sensitive detector. In this paper a superconducting normal metal cold electron bolometer (CEB) was used as a broadband sensor. Bolometers were integrated with broadband log-periodic antenna designed for 0.2-2 THz frequency range and double-dipole antennas designed for 300 and 600 GHz central frequency. A Josephson junction was used as a wide band electrically tuned terahertz cryogenic oscillator. Bicrystal YBaCuO Josephson junctions demonstrated a characteristic voltage IcRn of over 4 mV that corresponds to characteristic frequency about 2 THz. The bolometer chip is attached to a Si substrate lens at 260 mK and the oscillator chip is attached to the sapphire substrate lens at 1.8 K, with lenses facing each other at the distance of few centimeters. High signal was measured in the whole frequency range up to 1.7 THz by simple changing the bias voltage of Josephson junction from zero to 3.5 mV. A voltage response of the bolometer up to 4*108 V/W corresponds to an amplifier-limited technical noise equivalent power of the bolometer NEP=1.25*10-17 W/Hz1/2. Combining a Terahertz band Josephson junction, a high-sensitive hot electron bolometer, and a sample under test in between, makes it possible to develop a cryogenic compact Terahertz-band transmission spectrometer with a resolution below 1 GHz corresponding to the linewidth of Josephson oscillations. For frequencies below 600 GHz a conventional Nb shunted SIS junction can be used as Josephson oscillator.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Dec 8, 2004•3 citations

Detection of Pulsed Terahertz Waves Using High-Temperature Superconductor Josephson Junction

Ryosuke Kaneko, Iwao Kawayama, Hironaru Murakami +1 more

We report a novel terahertz (THz) detector with a high- T c superconducting (HTS) Josephson junction. This detector was fabricated using a YBa 2 Cu 3 O 7-δ grain boundary junction. Clear THz signals induced by THz-pulse radiation from an ultrafast photoconductive antenna excited by femtosecond optical pulses were observed. We investigated the characteristics of the detector by changing the parameters of THz radiation such as pump laser power for the THz emitter and THz polarization. The results indicate that the detector mainly detects the THz electric fields. This is the first demonstration of a detection of pulsed THz electric fields using an HTS Josephson junction.

Applied Physics Express•Apr 9, 2010•10 citations

Terahertz spectroscopy by Josephson oscillator and cold-electron bolometer

Michael A. Tarasov, L. S. Kuzmin, T. Claeson +2 more

For sensitive wideband spectroscopy at THz frequencies with performance better than for Fourier Transform Spectrometer, one needs a wide-range electrically tunable, narrow linewidth THz source, and a sensitive broadband detector. To obtain a low noise level of sensor we use a superconducting normal metal cold electron bolometer (CEB). A voltage response of the bolometer is 4.108 V/W and an amplifier-limited technical noise equivalent power of the bolometer is 1.25.10-17 W/Hz1/2. The wide band electrically tuned terahertz band cryogenic oscillator is a Josephson junction. Contrary to conventional Josephson junctions based on niobium, and naturally limited in frequency by energy gap of about 700 GHz, the high critical temperature YBaCuO junctions can extend this limit by an order of magnitude. At 4 K such oscillators can radiate at frequencies exceeding 2 THz. Signals received by bolometers integrated with double-dipole and log-periodic antennas and irradiated by the Josephson oscillator show in our experiments the high frequency response corresponding to an oscillation frequency of up to 1.75 THz. Such cryogenic terahertz network analyzer is suitable for low-signal spectral evaluation of cryogenic detectors, quasioptical sub-mm cryogenic filters, planar antennas with planar microwave filters, integrated structures comprising such elements, and arrays of cryogenic receivers.

•Jan 1, 2004•0 citations
This paper presents a terahertz (THz) spectrometer based on high temperature superconducting Josephson junction. The YBa2Cu3O7(YBCO) bi-crystal Josephson junctions (JJS) with log-periodic antennas are used as detectors. In the low temperature, with the signal measurement, data acquisition and human-computer interactive system, the automatic measurement system of THz spectrometer is finally accomplished and realizes the measurement of the wide frequency range from 0.1THz to 2.5THz. The frequency resolution reaches 0.04GHz (@ 114GHz) and 2GHz (@ 1.78THz). The spectral line width (Δf) is preliminarily analyzed.
We have demonstrated a low temperature spectrometer operating in a wide range of frequencies from 100 GHz to 1.8 THz. The spectrometer has utilized unique properties of high-T c superconducting Josephson junctions and wideband response of sensitive Cold-Electron 13olometers (CEB). The voltage response of the CEB integrated with log-periodic and double-dipole antennas, has been measured using an oscillator consisting of high-T c Josephson junction integrated on separate substrate with a log-periodic antenna. The response of the bolometer with a double dipole antenna has resonance shape with maximum corresponding to the designed central frequency of 300 GHz. A voltage response of the bolometer up to 4 . 10 V/W corresponds to a technical noise equivalent power of the bolometer of 1.2 . 10 W/HZ 112 including bolometer and amplifier sources of noise. A high-T c Josephson junction operated at temperatures below 2 K shows advantages of high I cRii product that enhances the oscillation frequency to over 1.8 THz. The resolution of the spectrometer is determined by the linewidth of Josephson oscillations and for this temperature is of the order of 1 GHz.
High temperature superconducting (HTS) Josephson junction (JJ) mixers are attractive candidates in receivers for terahertz (THz) communication due to their high sensitivity, wide bandwidth, low local oscillator (LO) power requirement and high harmonic numbers. The required LO frequencies and the cost can be greatly reduced when harmonic signals can be detected at high orders (more than 100). In this paper, up to 114thharmonic mixings is presented in a HTS bicrystal YBa2Cu3O7-δ(YBCO) JJ harmonic mixer coupled with a bowtie loaded meander antenna at 0.21 THz. HTS JJs will be promising high-order harmonic mixers for THz practical applications on reception or detection at THz bands.
A Josephson high-temperature superconducting (HTSC) submillimeter-wave spectrometer is designed, built, and experimentally investigated. The integrated detection structure of the spectrometer includes a YBCO Josephson junction on a bicrystalline boundary, a double-slot or log-periodic antenna, and a low-inductance resistive shunt. The selective detector response and the response at an intermediate frequency of 1.4 GHz are measured under the action of a signal in the frequency range 350–1250 GHz. Three methods of spectroscopy are investigated using this setup: 1) a method of Hilbert spectroscopy with processing of the detector response is implemented; 2) it is found that for a wide Josephson line at intermediate frequency (IF) the response has the same form as the detector response, making it possible to obtain a spectrum and the width of the generation line from IF response measurements; 3) for a narrow Josephson line the IF response corresponds to the regime of conversion with self-pumping. A new method is proposed for calculating the emission spectrum. The method consists of simple shift, summation, and subtraction operations. The advantages of the method are simplicity, high sensitivity, and high resolution.
For sensitive wideband spectroscopy at TeraHertz frequencies one needs a wide-range electrically tunable THz source and a sensitive detector. In this paper a superconducting normal metal cold electron bolometer (CEB) was used as a broadband sensor. Bolometers were integrated with broadband log-periodic antenna designed for 0.2-2 THz frequency range and double-dipole antennas designed for 300 and 600 GHz central frequency. A Josephson junction was used as a wide band electrically tuned terahertz cryogenic oscillator. Bicrystal YBaCuO Josephson junctions demonstrated a characteristic voltage IcRn of over 4 mV that corresponds to characteristic frequency about 2 THz. The bolometer chip is attached to a Si substrate lens at 260 mK and the oscillator chip is attached to the sapphire substrate lens at 1.8 K, with lenses facing each other at the distance of few centimeters. High signal was measured in the whole frequency range up to 1.7 THz by simple changing the bias voltage of Josephson junction from zero to 3.5 mV. A voltage response of the bolometer up to 4*108 V/W corresponds to an amplifier-limited technical noise equivalent power of the bolometer NEP=1.25*10-17 W/Hz1/2. Combining a Terahertz band Josephson junction, a high-sensitive hot electron bolometer, and a sample under test in between, makes it possible to develop a cryogenic compact Terahertz-band transmission spectrometer with a resolution below 1 GHz corresponding to the linewidth of Josephson oscillations. For frequencies below 600 GHz a conventional Nb shunted SIS junction can be used as Josephson oscillator.
We report a novel terahertz (THz) detector with a high- T c superconducting (HTS) Josephson junction. This detector was fabricated using a YBa 2 Cu 3 O 7-δ grain boundary junction. Clear THz signals induced by THz-pulse radiation from an ultrafast photoconductive antenna excited by femtosecond optical pulses were observed. We investigated the characteristics of the detector by changing the parameters of THz radiation such as pump laser power for the THz emitter and THz polarization. The results indicate that the detector mainly detects the THz electric fields. This is the first demonstration of a detection of pulsed THz electric fields using an HTS Josephson junction.
For sensitive wideband spectroscopy at THz frequencies with performance better than for Fourier Transform Spectrometer, one needs a wide-range electrically tunable, narrow linewidth THz source, and a sensitive broadband detector. To obtain a low noise level of sensor we use a superconducting normal metal cold electron bolometer (CEB). A voltage response of the bolometer is 4.108 V/W and an amplifier-limited technical noise equivalent power of the bolometer is 1.25.10-17 W/Hz1/2. The wide band electrically tuned terahertz band cryogenic oscillator is a Josephson junction. Contrary to conventional Josephson junctions based on niobium, and naturally limited in frequency by energy gap of about 700 GHz, the high critical temperature YBaCuO junctions can extend this limit by an order of magnitude. At 4 K such oscillators can radiate at frequencies exceeding 2 THz. Signals received by bolometers integrated with double-dipole and log-periodic antennas and irradiated by the Josephson oscillator show in our experiments the high frequency response corresponding to an oscillation frequency of up to 1.75 THz. Such cryogenic terahertz network analyzer is suitable for low-signal spectral evaluation of cryogenic detectors, quasioptical sub-mm cryogenic filters, planar antennas with planar microwave filters, integrated structures comprising such elements, and arrays of cryogenic receivers.