Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Optics Express

Electromagnetically induced transparency-like effect in microring-Bragg gratings based coupling resonant system

Zecen Zhang, Geok Ing Ng, Ting Hu, Haodong Qiu, Xin Guo, Mohamed Saïd Rouifed, Chongyang Liu, Hong Wang

Published Oct 26, 2016• 27 citations
Publisher

Abstract

An all-pass microring-Bragg gratings (APMR-BG) based coupling resonant system is proposed and experimentally demonstrated to generate electromagnetically induced transparency (EIT)-like transmission for the first time. The coupling between two light path ways in the micro-ring resonator and the Fabry-Pérot (F-P) resonator formed by two sections of Bragg gratings gives rise to the EIT-like spectrum. This system has the advantage of a small footprint consisting of only one microring resonator and one bus waveguide with Bragg gratings. It also has a large fabrication tolerance as the overlap requirement between the resonance wavelengths of the microring and the F-P resonator is more relaxed. The two most important properties of the EIT-like transmission namely the insertion loss (IL) and the full-width-at-half-maximum (FWHM) have been analytically investigated by utilizing the specially developed model based on the transfer matrix method. The APMR-BG based coupling resonant system was fabricated on a silicon-on-insulator (SOI) platform. The EIT-like transmission with an extinction ratio (ER) of 12 dB, a FWHM of 0.077 nm and a quality factor (Q factor) of 20200 was achieved, which agree well with the simulated results based on our numerical model. A slow light with a group delay of 38 ps was also obtained.

DOI
10.1364/oe.24.025665

Related papers

Conversion between EIT and Fano spectra in a microring-Bragg grating coupled-resonator system

Zecen Zhang, Geok Ing Ng, Ting Hu +6 more

A conversion between the electromagnetically induced transparency (EIT) transmission and Fano transmission is theoretically and experimentally demonstrated in an all-pass microring-Bragg grating (APMR-BG) coupled-resonator system. In this work, the coupling between the two resonators (the microring resonator and the Fabry-Perot resonator formed by two Bragg gratings) gives rise to the EIT and Fano transmissions. The resonant status strongly depends on the round-trip attenuation of the microring and the coupling strength. By tuning the coupling strength, the EIT and Fano transmissions can be controlled and converted. The device performance has been theoretically calculated and analyzed with a specially developed numerical model based on the transfer matrix method. The APMR-BG coupled-resonator systems with different gap widths were designed, fabricated, and characterized on a silicon-on-insulator (SOI) platform. The conversion of resonance was experimentally observed and verified. In addition, this on-chip system has the advantage of a small footprint, and the fabrication process is compatible with the planar waveguide fabrication process.

Applied Physics Letters•Aug 21, 2017•38 citations

Induced transparency in ring resonator devices

Yanbing Young Zhang

A microring resonator consists of a ring side-coupled to a bus waveguide, where the light exchange is achieved by means of evanescent coupling mechanism.It is a strong candidate for integrated optics due to its advantage of compact size, cascadable input/output ports, and the compatibility of CMOS fabrication.The microring resonator can be used to create many interesting phenomena that are difficult to obtain in other classical configurations.This thesis focuses on the theoretical analysis and experimental realization of induced transparency in optical devices derived from ring resonators.In this thesis, I propose a ring-bus-ring Mach-Zehnder interferometer (RBRMZI) system based on a 3×3 coupler, and show that such a system can generate an electromagnetically induced transparency (EIT)-like spectrum via phase engineering facilitated by interpathways interference between RBR and MZI, instead of separate light interaction in two resonators alone.Both the transfer matrix formalism and the temporal coupled mode theory are investigated to model this induced transparency.The relationship between the two theories is obtained via the energy-conservation and Q-factors.In addition, the EIT-like spectrum in the RBRMZI is experimentally realized using silicon-oninsulator technology.The best RBRMZI device has a transparency with a bandwidth of 0.25nm, a free spectral range of 12nm and a Q-factor of ~6300.With further measurements of the devices having strong ring-bus coupling, we obtain a Q~18000 when the circumference of one ring is 43.4μm and the circumference of the other ring is slightly detuned by ~0.035%.Moreover, we achieve a roundtrip loss as small as ~0.5% of the input energy.The measurement results agree well with theoretical prediction and 2D-FDTD numerical calculations.

•Jan 1, 2012•0 citations

Optical Analog to Electromagnetically Induced Transparency in Cascaded Ring-Resonator Systems

Yonghua Wang, Hua Zheng, Chenyang Xue +1 more

The analogue of electromagnetically induced transparency in optical methods has shown great potential in slow light and sensing applications. Here, we experimentally demonstrated a coupled resonator induced transparency system with three cascaded ring coupled resonators in a silicon chip. The structure was modeled by using the transfer matrix method. Influences of various parameters including coupling ratio of couplers, waveguide loss and additional loss of couplers on transmission characteristic and group index have been investigated theoretically and numerically in detail. The transmission character of the system was measured by the vertical grating coupling method. The enhanced quality factor reached 1.22 × 10⁵. In addition, we further test the temperature performance of the device. The results provide a new method for the manipulation of light in highly integrated optical circuits and sensing applications.

Sensors•Jul 25, 2016•7 citations

Compact tunable electromagnetically induced transparency and Fano resonance on silicon platform

Shuang Zheng, Zhengsen Ruan, Shengqian Gao +8 more

We propose and demonstrate an on-chip coupling resonant system to generate electromagnetically induced transparency (EIT)-like effect and Fano resonance on silicon platform. It is composed of a microring resonator (MRR) and two cascaded Sagnac-loop mirrors (SLMs) assisted Fabry-Perot (FP) cavity on silicon-on-insulator. According to the coupling conditions of the MRR, two cases are studied theoretically. When the MRR is over coupling, EIT-like transmission can be observed. In contrast, Fano resonances can be generated by the condition of under coupling. In the experiment, the add-drop MRR is under coupling, leading to a sharp asymmetric line shape for Fano resonance. The resonance wavelength of the MRR can be dynamically tuned based on thermal-optic effects by tuning the micro-heater. The experiment results show Fano resonances with maximum extinction ratio (ER) of 23.22 dB and maximum slope rate (SR) of 252 dB/nm. Moreover, the wavelength of Fano resonance can be shifted widely with a tuning efficiency of 0.2335 nm/mW.

Optics Express•Oct 9, 2017•61 citations

Electromagnetically induced transparency-like effect in a two-bus waveguides coupled microdisk resonator

Qingzhong Huang, Zhan Shu, Ge Song +3 more

We observe theoretically and experimentally electromagnetically induced transparency (EIT)-like effect in a single microdisk resonator (MDR) evanescently coupled with two bus waveguides. This structure is modeled using transfer matrix method, and it is revealed that the EIT-like spectrum originates from the coherent interference between two nearby low-order whispering-gallery modes (WGMs) with comparable quality factors. The EIT-like properties have been investigated analytically with respect to coupling efficiency, round-trip power attenuation, as well as phase spacing between two resonances. The resonance spacing and mode coupling are adjustable by varying the effective indices of WGMs and waveguide mode. Consequently, fully integrated MDRs were fabricated in silicon. Resonant modes and coupling efficiency are studied in one-bus waveguide coupled MDRs. Finally, EIT-like resonance is observed in a two-bus waveguides coupled MDR of 3 μm in radius with a quality factor of 4,200 and central transmission larger than 0.65. The experimental results agree with our modeling well and show good internal consistency, confirming that two WGMs coupled in a point-to-point manner are required for EIT-like effect.

Optics Express•Feb 4, 2014•51 citations

A compact structure for realizing electromagnetically induced transparency in a microring resonator

Fahad Mumtaz Malik, Muhammad Favad Qadir, Aftab Hussain +2 more

We propose a novel compact structure with EIT-like spectrum by introducing two partial reflectors (silica holes) symmetrically placed within the microring resonator (MRR). The two Fabry-Pérot (FP) resonating cavities created by the silica holes, coupled with microring’s resonance modes, show EIT-like lineshapes spaced by free spectral range of MRR. The FWHM of EIT-like spectrum can be controlled by tuning the radii of the silica holes. Analytical results from the developed mathematical model and 3D FDTD simulations were found to be in good agreement with each other.

SPIE Silicon Photonics•Feb 26, 2020•0 citations
An all-pass microring-Bragg gratings (APMR-BG) based coupling resonant system is proposed and experimentally demonstrated to generate electromagnetically induced transparency (EIT)-like transmission for the first time. The coupling between two light path ways in the micro-ring resonator and the Fabry-Pérot (F-P) resonator formed by two sections of Bragg gratings gives rise to the EIT-like spectrum. This system has the advantage of a small footprint consisting of only one microring resonator and one bus waveguide with Bragg gratings. It also has a large fabrication tolerance as the overlap requirement between the resonance wavelengths of the microring and the F-P resonator is more relaxed. The two most important properties of the EIT-like transmission namely the insertion loss (IL) and the full-width-at-half-maximum (FWHM) have been analytically investigated by utilizing the specially developed model based on the transfer matrix method. The APMR-BG based coupling resonant system was fabricated on a silicon-on-insulator (SOI) platform. The EIT-like transmission with an extinction ratio (ER) of 12 dB, a FWHM of 0.077 nm and a quality factor (Q factor) of 20200 was achieved, which agree well with the simulated results based on our numerical model. A slow light with a group delay of 38 ps was also obtained.
A conversion between the electromagnetically induced transparency (EIT) transmission and Fano transmission is theoretically and experimentally demonstrated in an all-pass microring-Bragg grating (APMR-BG) coupled-resonator system. In this work, the coupling between the two resonators (the microring resonator and the Fabry-Perot resonator formed by two Bragg gratings) gives rise to the EIT and Fano transmissions. The resonant status strongly depends on the round-trip attenuation of the microring and the coupling strength. By tuning the coupling strength, the EIT and Fano transmissions can be controlled and converted. The device performance has been theoretically calculated and analyzed with a specially developed numerical model based on the transfer matrix method. The APMR-BG coupled-resonator systems with different gap widths were designed, fabricated, and characterized on a silicon-on-insulator (SOI) platform. The conversion of resonance was experimentally observed and verified. In addition, this on-chip system has the advantage of a small footprint, and the fabrication process is compatible with the planar waveguide fabrication process.
A microring resonator consists of a ring side-coupled to a bus waveguide, where the light exchange is achieved by means of evanescent coupling mechanism.It is a strong candidate for integrated optics due to its advantage of compact size, cascadable input/output ports, and the compatibility of CMOS fabrication.The microring resonator can be used to create many interesting phenomena that are difficult to obtain in other classical configurations.This thesis focuses on the theoretical analysis and experimental realization of induced transparency in optical devices derived from ring resonators.In this thesis, I propose a ring-bus-ring Mach-Zehnder interferometer (RBRMZI) system based on a 3×3 coupler, and show that such a system can generate an electromagnetically induced transparency (EIT)-like spectrum via phase engineering facilitated by interpathways interference between RBR and MZI, instead of separate light interaction in two resonators alone.Both the transfer matrix formalism and the temporal coupled mode theory are investigated to model this induced transparency.The relationship between the two theories is obtained via the energy-conservation and Q-factors.In addition, the EIT-like spectrum in the RBRMZI is experimentally realized using silicon-oninsulator technology.The best RBRMZI device has a transparency with a bandwidth of 0.25nm, a free spectral range of 12nm and a Q-factor of ~6300.With further measurements of the devices having strong ring-bus coupling, we obtain a Q~18000 when the circumference of one ring is 43.4μm and the circumference of the other ring is slightly detuned by ~0.035%.Moreover, we achieve a roundtrip loss as small as ~0.5% of the input energy.The measurement results agree well with theoretical prediction and 2D-FDTD numerical calculations.
The analogue of electromagnetically induced transparency in optical methods has shown great potential in slow light and sensing applications. Here, we experimentally demonstrated a coupled resonator induced transparency system with three cascaded ring coupled resonators in a silicon chip. The structure was modeled by using the transfer matrix method. Influences of various parameters including coupling ratio of couplers, waveguide loss and additional loss of couplers on transmission characteristic and group index have been investigated theoretically and numerically in detail. The transmission character of the system was measured by the vertical grating coupling method. The enhanced quality factor reached 1.22 × 10⁵. In addition, we further test the temperature performance of the device. The results provide a new method for the manipulation of light in highly integrated optical circuits and sensing applications.
We propose and demonstrate an on-chip coupling resonant system to generate electromagnetically induced transparency (EIT)-like effect and Fano resonance on silicon platform. It is composed of a microring resonator (MRR) and two cascaded Sagnac-loop mirrors (SLMs) assisted Fabry-Perot (FP) cavity on silicon-on-insulator. According to the coupling conditions of the MRR, two cases are studied theoretically. When the MRR is over coupling, EIT-like transmission can be observed. In contrast, Fano resonances can be generated by the condition of under coupling. In the experiment, the add-drop MRR is under coupling, leading to a sharp asymmetric line shape for Fano resonance. The resonance wavelength of the MRR can be dynamically tuned based on thermal-optic effects by tuning the micro-heater. The experiment results show Fano resonances with maximum extinction ratio (ER) of 23.22 dB and maximum slope rate (SR) of 252 dB/nm. Moreover, the wavelength of Fano resonance can be shifted widely with a tuning efficiency of 0.2335 nm/mW.
We observe theoretically and experimentally electromagnetically induced transparency (EIT)-like effect in a single microdisk resonator (MDR) evanescently coupled with two bus waveguides. This structure is modeled using transfer matrix method, and it is revealed that the EIT-like spectrum originates from the coherent interference between two nearby low-order whispering-gallery modes (WGMs) with comparable quality factors. The EIT-like properties have been investigated analytically with respect to coupling efficiency, round-trip power attenuation, as well as phase spacing between two resonances. The resonance spacing and mode coupling are adjustable by varying the effective indices of WGMs and waveguide mode. Consequently, fully integrated MDRs were fabricated in silicon. Resonant modes and coupling efficiency are studied in one-bus waveguide coupled MDRs. Finally, EIT-like resonance is observed in a two-bus waveguides coupled MDR of 3 μm in radius with a quality factor of 4,200 and central transmission larger than 0.65. The experimental results agree with our modeling well and show good internal consistency, confirming that two WGMs coupled in a point-to-point manner are required for EIT-like effect.
We propose a novel compact structure with EIT-like spectrum by introducing two partial reflectors (silica holes) symmetrically placed within the microring resonator (MRR). The two Fabry-Pérot (FP) resonating cavities created by the silica holes, coupled with microring’s resonance modes, show EIT-like lineshapes spaced by free spectral range of MRR. The FWHM of EIT-like spectrum can be controlled by tuning the radii of the silica holes. Analytical results from the developed mathematical model and 3D FDTD simulations were found to be in good agreement with each other.