Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE International Symposium on Personal, Indoor and Mobile Radio Communications (PIMRC)

Construction of nonbinary LDPC codes using λ-FRC for circle elimination

Tiantian Wang, Minjian Zhao, Yabo Li, Chen Zheng

Published Sep 1, 2014• 0 citations
Publisher

Abstract

In this paper, an improved full rank condition (named as λ-FRC) is proposed for the construction of nonbinary LDPC codes. Compared with the conventional FRC, the λ-FRC introduces a metric λ to evaluate the reliability of the messages passing through the circle. Codes with better performance can be obtained by selecting elements of the parity matrix according to the metric. Based on the λ-FRC, a greedy search algorithm is proposed to design the codes efficiently. In order to further improve the performance of the codes constructed, an iterative search algorithm is applied in the construction. Simulation results show that the performance of codes constructed by the λ-FRC methods outperforms those by the FRC methods, and the iterative search algorithm improves the performance of the codes as the iteration number increases1.

DOI
10.1109/pimrc.2014.7136291

Related papers

Design of Nonbinary LDPC Codes Based on Message-Passing Algorithms

Sunghye Cho, Kyungwhoon Cheun, Kyeongcheol Yang

Short cycles in a nonbinary low-density parity-check (NB-LDPC) code may be even more harmful to its performance if they do not satisfy the so-called full rank condition (FRC). This is because they may induce low-weight codewords or absorbing sets in that case. Thus, it is important to count the number of short cycles not satisfying the FRC as well as the number of short cycles for analyzing the performance of an NB-LDPC code. In this paper, we first develop a novel message-passing algorithm and identify how it is related to the FRC. We then propose a low-complexity algorithm for counting the number of short cycles not satisfying the FRC in an NB-LDPC code, as well as the number of short cycles. Finally, we propose a low-complexity algorithm for designing an NB-LDPC code with low error floor. Depending on the modulation scheme, the codes constructed by the proposed design algorithm have similar or slightly worse performance, compared with those constructed via the method by Poulliat et al. However, the proposed design algorithm does not require a cycle enumeration algorithm with high complexity, and therefore is feasible even in the case of large code length, say ≥5000.

IEEE Transactions on Communications•Jun 19, 2018•6 citations

An Improved Full Rank Condition for Nonbinary LDPC Codes over BI-AWGN Channel

Yuhao Liu, Qin Huang

This paper improves the full rank condition (FRC) to construct nonbinary LDPC codes for binary AWGN channels, in which there is usually a one-bit error in one erroneous symbol. When assigning values to symbols in a cycle, our improved FRC condition not only considers rank deficiency, but also prefers values with the smallest probability that the related checks are mistakenly satisfied due to one-bit errors in these symbols. Finally, we present the IFRC-based optimization algorithm performs row-wise optimization on the non-zero elements of the parity-check matrix. Simulation results show the effectiveness of IFRC compared to FRC: the error-correcting performance is improved by 0.1dB to 0.5dB, and the error floor can be reduced by up to an order of magnitude.

IEEE/CIC International Conference on Communications in China (ICCC)•Aug 10, 2025•0 citations

A Message-Passing Algorithm for Counting Short Cycles in Nonbinary LDPC Codes

Sunghye Cho, Kyungwhoon Cheun, Kyeongcheol Yang

Trapping sets with short cycles are known to give a detrimental effect on the error floor performance of a low-density parity-check (LDPC) code. Unlike in binary LDPC codes., short cycles in a nonbinary low-density parity-check (NB-LDPC) code may be even more harmful to its performance if they do not satisfy the so-called full rank condition (FRC). This is because they may induce low-weight codewords or absorbing sets in that case. Thus, it is crucial to count the number of short cycles not satisfying the FRC as well as the number of short cycles for analyzing the performance of an NB-LDPC code. In this paper, we first develop a novel message-passing algorithm and identify how it is related to the FRC. We then propose a low-complexity algorithm for counting the number of short cycles not satisfying the FRC in an NB-LDPC code, as well as the number of short cycles.

IEEE International Symposium on Information Theory (ISIT)•Jun 1, 2018•5 citations

The design of structured LDPC codes with algorithmic graph construction

Wojciech Sułek

Low-Density Parity-Check (LDPC) codes are among the most effective modern error-correcting codes due to their excellent correction performance and highly parallel decoding scheme. Moreover, the nonbinary extension of such codes further increases performance in the short-block regime. In this paper, we review the key elements for the construction of implementation-oriented binary and nonbinary codes. These Quasi-Cyclic LDPC (QC-LDPC) codes additionally feature efficient encoder and decoder implementation frameworks. We then present a versatile algorithm for the construction of both binary and nonbinary QC-LDPC codes that have low encoding complexity and an optimized corresponding graph structure. Our algorithm uses a progressive edge growth algorithm, modified for QC-LDPC graph construction, and then performs an iterative global search for optimized cyclic shift values within the QC-LDPC circulants. Strong error correction performance is achieved by minimizing the number of short cycles, and cycles with low external connectivity, within the code graph. We validate this approach via error rate simulations of a transmission system model featuring an LDPC coder-decoder, digital modulation, and additive white Gaussian noise channels. The obtained numerical results validate the effectiveness of the proposed construction algorithm, with a number of constructed codes exhibiting either similar or superior performance to industry standard binary codes and selected nonbinary codes from the literature.

Bulletin of the Polish Academy of Sciences Technical Sciences•May 30, 2022•0 citations

Construction of short-block nonbinary LDPC codes based on cyclic codes

Hengzhou Xu, Baoming Bai, Min Zhu +2 more

In this paper, we focus on short-block nonbinary LDPC (NB-LDPC) codes based on cyclic codes. Based on Tanner graphs' isomorphism, we present an efficient search algorithm for finding non-isomorphic binary cyclic LDPC codes. Notice that the parity-check matrix H of the resulting code is square and not of full rank, and its row weight and column weight are the same. By replacing the ones in the same column of H with a nonzero element of finite fields GF(q), a class of NB-LDPC codes over GF(q) is obtained. Numerical results show that the constructed codes perform well over the AWGN channel and have fast decoding convergence. Therefore, the proposed NB-LDPC codes provide a promising coding scheme for low-latency and high-reliability communications.

China Communications•Aug 1, 2017•5 citations

Design of Low-Density Parity-Check Codes and Their Decoding Algorithms

조성혜

In this thesis, we propose low-complexity designing algorithms for non-binary low-density \nparity-check (NB-LDPC) codes over GF(q) with low error floor and low-complexity decoding \nalgorithms for binary LDPC codes. \nWe first propose a low-complexity designing algorithm for for NB-LDPC codes over GF(q) \nbased on message-passing algorithms. Short cycles in an NB-LDPC code may be even \nmore harmful to its performance if they do not satisfy the so-called full rank condition \n(FRC). This is because they may induce low-weight codewords or absorbing sets in that \ncase. Thus, it is crucial to count the number of short cycles not satisfying the FRC as well as \nthe number of short cycles for analyzing the performance of an NB-LDPC code. In order to \ncount those cycles, we first develop a novel message-passing algorithm and identify how it \nis related to the FRC.We then propose a low-complexity algorithmfor counting the number \nof short cycles not satisfying the FRC in an NB-LDPC code, as well as the number of short \ncycles. The proposed algorithm is not only theoretically validated, but its computational \nand storage complexities are also computed. It does not require cycle enumeration with \nhigh complexity, and therefore is still feasible even in the case of large code length, say \n≤ 5000, unlike the conventional methods. Based on it, we also provide a locally optimal \nrule to choose a nonzero element for a given edge and propose a low-complexity algorithm \nfor designing an NB-LDPC code with low error floor. Furthermore, several design examples \nare presented to verify the validity of the proposed design algorithm. \nSecondly, we propose a low-complexity decoding algorithm for binary LDPC codes over \nthe binary symmetric channel (BSC). The min-sum (MS) algorithm is a low-complexity decoding \nalgorithm for binary LDPC codes and has lower computational complexity than the \nsum-product algorithm (SPA). Since the MS algorithm is an approximation of the SPA, it \nhas performance degradation. Furthermore, reducing the number of bits for representing \nmessages to two in a decoding algorithm for further reducing computational and storage \ncomplexities, causes significant performance losses. In order to minimize the performance \ndegradation and computational and storage complexities, we propose a low-complexity \ndecoding algorithm which uses several decoders with two-bit precision for binary LDPC \ncodes over the BSC. The proposed algorithm adaptively changes decoders according to \nthe number of unsatisfied check nodes at each iteration. Compared with the SPA using \nfloating-point operations, the proposed decoding algorithm greatly reduces computational \nand storage complexities with negligible performance losses. Numerical results show that \nthe proposed decoding algorithm has similar performance to the SPA with floating-point \noperations over the BSC. \nIn the last part of this thesis, low-complexity decoding algorithms of binary LDPC codes \nfor the core layer at fixed receivers in ATSC 3.0 are proposed. Gallager’s decoding algorithms \nB (GDB) and E (GDE) for binary LDPC codes have much lower computational \ncomplexity and much less required memory size than the SPA. This is because GDB and \nGDE only use binary or integer operations, while the SPA requires real operations and \na look-up table. However, they are hardly used in commercial communication systems \nsince they have poorer performance than the SPA. Layered-division multiplexing (LDM) \nis considered in ATSC 3.0 in order to deliver multiple broadcasting streams with distinct \nrobustness in a single radio frequency channel. Due to the unique characteristic of the \nLDM, we propose to use GDB or GDE rather than the SPA for decoding the core layer signal \nat fixed receivers. Numerical results show that the computational complexity and the \nrequired memory size can be reduced without any performance loss by about 50 percent \nand 80 percent, respectively, when GDB and GDE are employed.

•Jan 1, 2018•0 citations
In this paper, an improved full rank condition (named as λ-FRC) is proposed for the construction of nonbinary LDPC codes. Compared with the conventional FRC, the λ-FRC introduces a metric λ to evaluate the reliability of the messages passing through the circle. Codes with better performance can be obtained by selecting elements of the parity matrix according to the metric. Based on the λ-FRC, a greedy search algorithm is proposed to design the codes efficiently. In order to further improve the performance of the codes constructed, an iterative search algorithm is applied in the construction. Simulation results show that the performance of codes constructed by the λ-FRC methods outperforms those by the FRC methods, and the iterative search algorithm improves the performance of the codes as the iteration number increases1.
Short cycles in a nonbinary low-density parity-check (NB-LDPC) code may be even more harmful to its performance if they do not satisfy the so-called full rank condition (FRC). This is because they may induce low-weight codewords or absorbing sets in that case. Thus, it is important to count the number of short cycles not satisfying the FRC as well as the number of short cycles for analyzing the performance of an NB-LDPC code. In this paper, we first develop a novel message-passing algorithm and identify how it is related to the FRC. We then propose a low-complexity algorithm for counting the number of short cycles not satisfying the FRC in an NB-LDPC code, as well as the number of short cycles. Finally, we propose a low-complexity algorithm for designing an NB-LDPC code with low error floor. Depending on the modulation scheme, the codes constructed by the proposed design algorithm have similar or slightly worse performance, compared with those constructed via the method by Poulliat et al. However, the proposed design algorithm does not require a cycle enumeration algorithm with high complexity, and therefore is feasible even in the case of large code length, say ≥5000.
This paper improves the full rank condition (FRC) to construct nonbinary LDPC codes for binary AWGN channels, in which there is usually a one-bit error in one erroneous symbol. When assigning values to symbols in a cycle, our improved FRC condition not only considers rank deficiency, but also prefers values with the smallest probability that the related checks are mistakenly satisfied due to one-bit errors in these symbols. Finally, we present the IFRC-based optimization algorithm performs row-wise optimization on the non-zero elements of the parity-check matrix. Simulation results show the effectiveness of IFRC compared to FRC: the error-correcting performance is improved by 0.1dB to 0.5dB, and the error floor can be reduced by up to an order of magnitude.
Trapping sets with short cycles are known to give a detrimental effect on the error floor performance of a low-density parity-check (LDPC) code. Unlike in binary LDPC codes., short cycles in a nonbinary low-density parity-check (NB-LDPC) code may be even more harmful to its performance if they do not satisfy the so-called full rank condition (FRC). This is because they may induce low-weight codewords or absorbing sets in that case. Thus, it is crucial to count the number of short cycles not satisfying the FRC as well as the number of short cycles for analyzing the performance of an NB-LDPC code. In this paper, we first develop a novel message-passing algorithm and identify how it is related to the FRC. We then propose a low-complexity algorithm for counting the number of short cycles not satisfying the FRC in an NB-LDPC code, as well as the number of short cycles.
Low-Density Parity-Check (LDPC) codes are among the most effective modern error-correcting codes due to their excellent correction performance and highly parallel decoding scheme. Moreover, the nonbinary extension of such codes further increases performance in the short-block regime. In this paper, we review the key elements for the construction of implementation-oriented binary and nonbinary codes. These Quasi-Cyclic LDPC (QC-LDPC) codes additionally feature efficient encoder and decoder implementation frameworks. We then present a versatile algorithm for the construction of both binary and nonbinary QC-LDPC codes that have low encoding complexity and an optimized corresponding graph structure. Our algorithm uses a progressive edge growth algorithm, modified for QC-LDPC graph construction, and then performs an iterative global search for optimized cyclic shift values within the QC-LDPC circulants. Strong error correction performance is achieved by minimizing the number of short cycles, and cycles with low external connectivity, within the code graph. We validate this approach via error rate simulations of a transmission system model featuring an LDPC coder-decoder, digital modulation, and additive white Gaussian noise channels. The obtained numerical results validate the effectiveness of the proposed construction algorithm, with a number of constructed codes exhibiting either similar or superior performance to industry standard binary codes and selected nonbinary codes from the literature.
In this paper, we focus on short-block nonbinary LDPC (NB-LDPC) codes based on cyclic codes. Based on Tanner graphs' isomorphism, we present an efficient search algorithm for finding non-isomorphic binary cyclic LDPC codes. Notice that the parity-check matrix H of the resulting code is square and not of full rank, and its row weight and column weight are the same. By replacing the ones in the same column of H with a nonzero element of finite fields GF(q), a class of NB-LDPC codes over GF(q) is obtained. Numerical results show that the constructed codes perform well over the AWGN channel and have fast decoding convergence. Therefore, the proposed NB-LDPC codes provide a promising coding scheme for low-latency and high-reliability communications.
In this thesis, we propose low-complexity designing algorithms for non-binary low-density \nparity-check (NB-LDPC) codes over GF(q) with low error floor and low-complexity decoding \nalgorithms for binary LDPC codes. \nWe first propose a low-complexity designing algorithm for for NB-LDPC codes over GF(q) \nbased on message-passing algorithms. Short cycles in an NB-LDPC code may be even \nmore harmful to its performance if they do not satisfy the so-called full rank condition \n(FRC). This is because they may induce low-weight codewords or absorbing sets in that \ncase. Thus, it is crucial to count the number of short cycles not satisfying the FRC as well as \nthe number of short cycles for analyzing the performance of an NB-LDPC code. In order to \ncount those cycles, we first develop a novel message-passing algorithm and identify how it \nis related to the FRC.We then propose a low-complexity algorithmfor counting the number \nof short cycles not satisfying the FRC in an NB-LDPC code, as well as the number of short \ncycles. The proposed algorithm is not only theoretically validated, but its computational \nand storage complexities are also computed. It does not require cycle enumeration with \nhigh complexity, and therefore is still feasible even in the case of large code length, say \n≤ 5000, unlike the conventional methods. Based on it, we also provide a locally optimal \nrule to choose a nonzero element for a given edge and propose a low-complexity algorithm \nfor designing an NB-LDPC code with low error floor. Furthermore, several design examples \nare presented to verify the validity of the proposed design algorithm. \nSecondly, we propose a low-complexity decoding algorithm for binary LDPC codes over \nthe binary symmetric channel (BSC). The min-sum (MS) algorithm is a low-complexity decoding \nalgorithm for binary LDPC codes and has lower computational complexity than the \nsum-product algorithm (SPA). Since the MS algorithm is an approximation of the SPA, it \nhas performance degradation. Furthermore, reducing the number of bits for representing \nmessages to two in a decoding algorithm for further reducing computational and storage \ncomplexities, causes significant performance losses. In order to minimize the performance \ndegradation and computational and storage complexities, we propose a low-complexity \ndecoding algorithm which uses several decoders with two-bit precision for binary LDPC \ncodes over the BSC. The proposed algorithm adaptively changes decoders according to \nthe number of unsatisfied check nodes at each iteration. Compared with the SPA using \nfloating-point operations, the proposed decoding algorithm greatly reduces computational \nand storage complexities with negligible performance losses. Numerical results show that \nthe proposed decoding algorithm has similar performance to the SPA with floating-point \noperations over the BSC. \nIn the last part of this thesis, low-complexity decoding algorithms of binary LDPC codes \nfor the core layer at fixed receivers in ATSC 3.0 are proposed. Gallager’s decoding algorithms \nB (GDB) and E (GDE) for binary LDPC codes have much lower computational \ncomplexity and much less required memory size than the SPA. This is because GDB and \nGDE only use binary or integer operations, while the SPA requires real operations and \na look-up table. However, they are hardly used in commercial communication systems \nsince they have poorer performance than the SPA. Layered-division multiplexing (LDM) \nis considered in ATSC 3.0 in order to deliver multiple broadcasting streams with distinct \nrobustness in a single radio frequency channel. Due to the unique characteristic of the \nLDM, we propose to use GDB or GDE rather than the SPA for decoding the core layer signal \nat fixed receivers. Numerical results show that the computational complexity and the \nrequired memory size can be reduced without any performance loss by about 50 percent \nand 80 percent, respectively, when GDB and GDE are employed.