Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Generation and Efficient Measurement of Single Photons Using Superconducting Circuits

William Kindel

Published Jan 1, 2015• 0 citations
OpenAlex

Abstract

In this thesis, I demonstrate and evaluate an on-demand source of single propagating microwaves photons. Working in the context of a quantum network, nodes are connected via propagating, nonclassical states of the electromagnetic field. As such, preparing and detecting propagating quantum states is an essential task. I work with one particular node consisting of a microfabricated, effective two level system coupled to a microwave resonator and study its ability to produce propagating nonclassical states, such as single photon states. In principle, states generated by this node could be sent to other such nodes. However, I send them into a Josephson parametric amplifier (JPA) to characterize the source. In particular, I discuss how to design and couple the two components that form my source: a fixed frequency transmon qubit and a 3D superconducting waveguide cavity. I demonstrate the ability to control of the dynamics of this combined system and implement a single photon generation protocol, which utilizes a single microwave control field that is far detuned from the photon emission frequency. To characterize the generation, I perform tomography on the propagating photon state to determine its density matrix ρ. I perform repeated JPA-backed, linear measurements of the propagating state. Based on the histograms of my measurements, I infer a maximum single photon component ρ₁₁ = 0.36 ± 0.01. I characterize the imperfections of the photon generation and detection, including detection inefficiency and measurement backaction. I find that within uncertainty my measurements match my expectation.

Related papers

Generation and efficient measurement of single photons from fixed-frequency superconducting qubits

William Kindel, Michael D. Schroer, Konrad W. Lehnert

We demonstrate and evaluate an on-demand source of single itinerant microwave photons. Photons are generated using a highly coherent, fixed-frequency qubit-cavity system, and a protocol where the microwave control field is far detuned from the photon emission frequency. By using a Josephson parametric amplifier (JPA), we perform efficient single-quadrature detection of the state emerging from the cavity. We characterize the imperfections of the photon generation and detection, including detection inefficiency and state infidelity caused by measurement back-action over a range of JPA gains from 17 to 33 dB. We observe that both detection efficiency and undesirable back-action increase with JPA gain. We find that the density matrix has its maximum single-photon component ${\ensuremath{\rho}}_{11}=0.36\ifmmode\pm\else\textpm\fi{}0.01$ at 29 dB JPA gain. At this gain, back-action of the JPA creates cavity photon number fluctuations that we model as a thermal distribution with an average photon number $\overline{n}=0.041\ifmmode\pm\else\textpm\fi{}0.003$.

arXiv:1510.00663•Physical Review A•Mar 9, 2016•34 citations

Hong-Ou-Mandel Interference with Microwave Photons: Doing Quantum Optics Experiments using Superconducting Circuits

Andreas J. Wallraff

Using modern micro and nano-fabrication techniques combined with superconducting materials we realize quantum electronic circuits in which we create, store, and manipulate individual microwave photons. The strong interaction of photons with superconducting quantum two-level systems allows us to probe fundamental quantum effects of microwave radiation and also to develop components for applications in quantum technology. Previously we have realized on-demand single photon sources which we have characterized using correlation function measurements [1] and full quantum state tomography [2]. For this purpose we have developed efficient methods to separate the quantum signals of interest from the noise added by the linear amplifiers used for quadrature amplitude detection [3]. We now regularly employ superconducting parametric amplifiers [4] to perform nearly quantum limited detection of propagating electromagnetic fields. These enable us to probe the entanglement which we generate on demand between stationary qubits and microwave photons freely propagating down a transmission line [5]. Using two independent microwave single photon sources, we have recently performed Hong-Ou-Mandel experiments at microwave frequencies [6] and have probed the coherence of two-mode multi-photon states at the out-put of a beam-splitter. The non-local nature of such states may prove to be useful for distributing entanglement in future small-scale quantum networks.

Bulletin of the American Physical Society•Jun 3, 2014•0 citations

Quantum Optics with Propagating Microwaves in Superconducting Circuits

I. Hoi

We address recent advances in quantum optics with propagating microwaves\nin superconducting circuits. This research field exploits on the fact that the coupling between a superconducting artificial atom and propagating microwave photons in a one-dimensional (1D) open transmission line can be made strong enough to observe quantum effects, without using any cavity to confine the microwave photons.\nWe embed an artificial atom, a superconducting transmon qubit, in a 1D open\ntransmission line and investigate the scattering properties of coherent microwaves. When an input coherent state, with an average photon number much less than 1, is on resonance with the artificial atom, we observe extinction of up to 99% in the forward propagating field. We observe the strong nonlinearity of the artificial atom and under strong driving we observe the Mollow triplet. We also study the statistics of the reflected and transmitted beams, which are predicted to be nonclassical states. In particular, we demonstrate photon antibunching in the reflected beam by measuring the second-order correlation function. By applying a second control tone, we observe the Autler-Townes splitting and a giant cross-Kerr effect.\nFurthermore, we demonstrate fast operation of a single-photon router using\nthe Autler-Townes splitting. This device provides important steps towards the realization of a quantum network. This thesis describes the motivation, theoretical background, design, implementation and measurement results.

•Jan 1, 2013•5 citations

Propagating microwave photons in superconducting circuits

Juan José García‐Ripoll, J. J. Mazo, E. Solano +1 more

In the last decade, the field of Quantum Optics has been enriched with a completely new platform: superconducting quantum circuits, also known as circuit-QED. This platform builds on the original designs of superconducting qubits, that is few-level systems made of superconducting islands and Josephson junctions, but adds to it a new ingredient, microwave photons. In this talk I will review circuit-QED with a focus on two complementary lines of research: ultrastrong light-matter coupling and strongly correlated propagating photons. The first topic deals with novel designs of superconducting qubits, engineering their coupling to the microwave radiation field to reach Rabi frequencies that approach the qubit and photon frequencies. In this regime, known as ”ultrastrong coupling”, the rotating wave approximation from Quantum Optics is no longer valid, the vacuum may spontaneously polarize, producing photons that get bound to the qubit, and novel physics is expected to emerge. I will review recent experiments on this topic, together with various theoretical proposals to tame this ultrastrong coupling. The second topic revolves around the notion of ”propagating” photons in these circuits. Most experiments in circuit-QED so far adopted the typical configuration of artificial atoms (qubits) interacting with artificial cavities (LC resonators). This proved useful in order to reach the strong coupling regime, demonstrating Rabi oscillations and developing a variety of protocols for quantum information, tomograhy, entanglement, etc. However, recent experiments have shown that it is possible to also work with propagating photons, replacing the LC resonators with open transmission lines, and studying the scattering properties of those artificial atoms. In this context we have worked on developing new technology to detect and control these photons, engineering single-photon detectors, quantum metamaterials and photonic crystals, or even new nonlinear media based on coupled cavities.

•Sep 9, 2012•0 citations

Strong Interaction Between a Single Artificial Atom and Propagating Microwave Photons

I. Hoi

The realization of a quantum network composed of quantum nodes which process quantum fields and quantum channels to transfer quantum information has recently been proposed. In recent years, fundamental experiments produced by superconducting circuits suggest that they are promising candidates for realization of a quantum network. Superconducting circuit QED can act as quantum nodes, which can be linked by quantum channels, to transfer flying microwave photons (quantum information) from site to site on chip with high fidelity. Therefore, controlling the propagating microwave photons on chip is an essential step towards realization of a quantum network.In this thesis, we demonstrate a specific quantum node, namely the single photon router. The active element of the router is a single three-level artificial atom, a superconducting transmon type qubit, strongly coupled to a superconducting 1D transmission line. Strong coupling between the artificial atom and propagating microwave photons, revealed in high degree scattering of the resonance waves, has been observed. By exploiting the phenomenon of electromagnetically induced transparency (EIT), we can route a single photon signal from an input port to either of two output ports with an on-off ratio of approximately 90%. The switching time of the router is shown to be a few nanoseconds, consistent with theoretical expectations and the device parameters. Besides the router, we also observed some fundamental phenomenon of single atom, such as strong nonlinearity, anomalous dispersion and the Mollow Triplet.This thesis describes the motivation, theoretical background, design, implementation and the measurement results.

•Jan 1, 2011•0 citations

Frequency-tunable microwave quantum light source based on superconducting quantum circuits

Yan Li, Zhiling Wang, Zenghui Bao +7 more

A nonclassical light source is essential for implementing a wide range of quantum information processing protocols, including quantum computing, networking, communication, and metrology. In the microwave regime, propagating photonic qubits that transfer quantum information between multiple superconducting quantum chips serve as building blocks of large-scale quantum computers. In this context, spectral control of propagating single photons is crucial for interfacing different quantum nodes with varied frequencies and bandwidth. Here we demonstrate a deterministic microwave quantum light source based on superconducting quantum circuits that can generate propagating single photons, time-bin encoded photonic qubits and qudits. In particular, the frequency of the emitted photons can be tuned in situ as large as 200 MHz. Even though the internal quantum efficiency of the light source is sensitive to the working frequency, we show that the fidelity of the propagating photonic qubit can be well preserved with the time-bin encoding scheme. Our work thus demonstrates a versatile approach to realizing a practical quantum light source for future distributed quantum computing.

arXiv:2304.05847•Chip•Aug 18, 2023•12 citations
In this thesis, I demonstrate and evaluate an on-demand source of single propagating microwaves photons. Working in the context of a quantum network, nodes are connected via propagating, nonclassical states of the electromagnetic field. As such, preparing and detecting propagating quantum states is an essential task. I work with one particular node consisting of a microfabricated, effective two level system coupled to a microwave resonator and study its ability to produce propagating nonclassical states, such as single photon states. In principle, states generated by this node could be sent to other such nodes. However, I send them into a Josephson parametric amplifier (JPA) to characterize the source. In particular, I discuss how to design and couple the two components that form my source: a fixed frequency transmon qubit and a 3D superconducting waveguide cavity. I demonstrate the ability to control of the dynamics of this combined system and implement a single photon generation protocol, which utilizes a single microwave control field that is far detuned from the photon emission frequency. To characterize the generation, I perform tomography on the propagating photon state to determine its density matrix ρ. I perform repeated JPA-backed, linear measurements of the propagating state. Based on the histograms of my measurements, I infer a maximum single photon component ρ₁₁ = 0.36 ± 0.01. I characterize the imperfections of the photon generation and detection, including detection inefficiency and measurement backaction. I find that within uncertainty my measurements match my expectation.
We demonstrate and evaluate an on-demand source of single itinerant microwave photons. Photons are generated using a highly coherent, fixed-frequency qubit-cavity system, and a protocol where the microwave control field is far detuned from the photon emission frequency. By using a Josephson parametric amplifier (JPA), we perform efficient single-quadrature detection of the state emerging from the cavity. We characterize the imperfections of the photon generation and detection, including detection inefficiency and state infidelity caused by measurement back-action over a range of JPA gains from 17 to 33 dB. We observe that both detection efficiency and undesirable back-action increase with JPA gain. We find that the density matrix has its maximum single-photon component ${\ensuremath{\rho}}_{11}=0.36\ifmmode\pm\else\textpm\fi{}0.01$ at 29 dB JPA gain. At this gain, back-action of the JPA creates cavity photon number fluctuations that we model as a thermal distribution with an average photon number $\overline{n}=0.041\ifmmode\pm\else\textpm\fi{}0.003$.
Using modern micro and nano-fabrication techniques combined with superconducting materials we realize quantum electronic circuits in which we create, store, and manipulate individual microwave photons. The strong interaction of photons with superconducting quantum two-level systems allows us to probe fundamental quantum effects of microwave radiation and also to develop components for applications in quantum technology. Previously we have realized on-demand single photon sources which we have characterized using correlation function measurements [1] and full quantum state tomography [2]. For this purpose we have developed efficient methods to separate the quantum signals of interest from the noise added by the linear amplifiers used for quadrature amplitude detection [3]. We now regularly employ superconducting parametric amplifiers [4] to perform nearly quantum limited detection of propagating electromagnetic fields. These enable us to probe the entanglement which we generate on demand between stationary qubits and microwave photons freely propagating down a transmission line [5]. Using two independent microwave single photon sources, we have recently performed Hong-Ou-Mandel experiments at microwave frequencies [6] and have probed the coherence of two-mode multi-photon states at the out-put of a beam-splitter. The non-local nature of such states may prove to be useful for distributing entanglement in future small-scale quantum networks.
We address recent advances in quantum optics with propagating microwaves\nin superconducting circuits. This research field exploits on the fact that the coupling between a superconducting artificial atom and propagating microwave photons in a one-dimensional (1D) open transmission line can be made strong enough to observe quantum effects, without using any cavity to confine the microwave photons.\nWe embed an artificial atom, a superconducting transmon qubit, in a 1D open\ntransmission line and investigate the scattering properties of coherent microwaves. When an input coherent state, with an average photon number much less than 1, is on resonance with the artificial atom, we observe extinction of up to 99% in the forward propagating field. We observe the strong nonlinearity of the artificial atom and under strong driving we observe the Mollow triplet. We also study the statistics of the reflected and transmitted beams, which are predicted to be nonclassical states. In particular, we demonstrate photon antibunching in the reflected beam by measuring the second-order correlation function. By applying a second control tone, we observe the Autler-Townes splitting and a giant cross-Kerr effect.\nFurthermore, we demonstrate fast operation of a single-photon router using\nthe Autler-Townes splitting. This device provides important steps towards the realization of a quantum network. This thesis describes the motivation, theoretical background, design, implementation and measurement results.
In the last decade, the field of Quantum Optics has been enriched with a completely new platform: superconducting quantum circuits, also known as circuit-QED. This platform builds on the original designs of superconducting qubits, that is few-level systems made of superconducting islands and Josephson junctions, but adds to it a new ingredient, microwave photons. In this talk I will review circuit-QED with a focus on two complementary lines of research: ultrastrong light-matter coupling and strongly correlated propagating photons. The first topic deals with novel designs of superconducting qubits, engineering their coupling to the microwave radiation field to reach Rabi frequencies that approach the qubit and photon frequencies. In this regime, known as ”ultrastrong coupling”, the rotating wave approximation from Quantum Optics is no longer valid, the vacuum may spontaneously polarize, producing photons that get bound to the qubit, and novel physics is expected to emerge. I will review recent experiments on this topic, together with various theoretical proposals to tame this ultrastrong coupling. The second topic revolves around the notion of ”propagating” photons in these circuits. Most experiments in circuit-QED so far adopted the typical configuration of artificial atoms (qubits) interacting with artificial cavities (LC resonators). This proved useful in order to reach the strong coupling regime, demonstrating Rabi oscillations and developing a variety of protocols for quantum information, tomograhy, entanglement, etc. However, recent experiments have shown that it is possible to also work with propagating photons, replacing the LC resonators with open transmission lines, and studying the scattering properties of those artificial atoms. In this context we have worked on developing new technology to detect and control these photons, engineering single-photon detectors, quantum metamaterials and photonic crystals, or even new nonlinear media based on coupled cavities.
The realization of a quantum network composed of quantum nodes which process quantum fields and quantum channels to transfer quantum information has recently been proposed. In recent years, fundamental experiments produced by superconducting circuits suggest that they are promising candidates for realization of a quantum network. Superconducting circuit QED can act as quantum nodes, which can be linked by quantum channels, to transfer flying microwave photons (quantum information) from site to site on chip with high fidelity. Therefore, controlling the propagating microwave photons on chip is an essential step towards realization of a quantum network.In this thesis, we demonstrate a specific quantum node, namely the single photon router. The active element of the router is a single three-level artificial atom, a superconducting transmon type qubit, strongly coupled to a superconducting 1D transmission line. Strong coupling between the artificial atom and propagating microwave photons, revealed in high degree scattering of the resonance waves, has been observed. By exploiting the phenomenon of electromagnetically induced transparency (EIT), we can route a single photon signal from an input port to either of two output ports with an on-off ratio of approximately 90%. The switching time of the router is shown to be a few nanoseconds, consistent with theoretical expectations and the device parameters. Besides the router, we also observed some fundamental phenomenon of single atom, such as strong nonlinearity, anomalous dispersion and the Mollow Triplet.This thesis describes the motivation, theoretical background, design, implementation and the measurement results.
A nonclassical light source is essential for implementing a wide range of quantum information processing protocols, including quantum computing, networking, communication, and metrology. In the microwave regime, propagating photonic qubits that transfer quantum information between multiple superconducting quantum chips serve as building blocks of large-scale quantum computers. In this context, spectral control of propagating single photons is crucial for interfacing different quantum nodes with varied frequencies and bandwidth. Here we demonstrate a deterministic microwave quantum light source based on superconducting quantum circuits that can generate propagating single photons, time-bin encoded photonic qubits and qudits. In particular, the frequency of the emitted photons can be tuned in situ as large as 200 MHz. Even though the internal quantum efficiency of the light source is sensitive to the working frequency, we show that the fidelity of the propagating photonic qubit can be well preserved with the time-bin encoding scheme. Our work thus demonstrates a versatile approach to realizing a practical quantum light source for future distributed quantum computing.