A cloud of ultracold atoms trapped within the confines of a high-finesse optical cavity shakes from the pressure of the light that probes it. This form of measurement backaction, a central component of quantum measurement theory, is the subject of this dissertation. Enlisting the collective motion of ultracold atoms as the mechanical degree of freedom in a cavity optomechanical system, we reach settings cold and quiet enough to allow for the effects of measurement backaction to manifest. We report predictions for and experimental observa- tions of the Standard Quantum Limit for force sensitivity, optical ponderomotive squeezing, and the possibility of complex squeezing through generalized optical correlations.
A cloud of ultracold atoms trapped within the confines of a high-finesse optical cavity shakes from the pressure of the light that probes it. This form of measurement backaction, a central component of quantum measurement theory, is the subject of this dissertation. Enlisting the collective motion of ultracold atoms as the mechanical degree of freedom in a cavity optomechanical system, we reach settings cold and quiet enough to allow for the effects of measurement backaction to manifest. We report predictions for and experimental observa- tions of the Standard Quantum Limit for force sensitivity, optical ponderomotive squeezing, and the possibility of complex squeezing through generalized optical correlations.
A common goal of recent research is the elucidation and control over quantum mechanical behavior in ever-larger physical systems. In this thesis I present an alternative target for investigating the quantum motion of macroscopic bodies: the collective motion of an ultracold atomic gas trapped within a high-finesse Fabry-Perot optical cavity in the single-atom strong-coupling regime of cavity quantum electrodynamics (CQED). When ultracold atoms are trapped in the Lamb-Dicke regime, the cavity-mode structure selects a single collective degree of freedom that is at once actuated by the optical forces from cavity probe light and measured by the cavity’s optical properties. Dispersive optical bistability arising from collective motion of the atomic medium was observed. Measurement of the collective motion was subject to quantum measurement backaction by the quantum force fluctuations of the cavity optical field. The strength and spectrum of these backaction force fluctuations was measured by quantifying the cavity-light-induced heating rate of the intracavity atomic ensemble, finding quantitative agreement with the expected heating rate from quantum optical fluctuations. Dynamical phenomena in the optomechanical system were explored experimentally and theoretically. Quantum limited measurements are discussed and were
An exciting scientific goal, common to many fields of research, is the development of ever-larger physical systems operating in the quantum regime. Relevant to this dissertation is the objective of preparing and observing a mechanical object in its motional quantum ground state. In order to sense the object's zero-point motion, the probe itself must have quantum-limited sensitivity. Cavity optomechanics, the interactions between light and a mechanical object inside an optical cavity, provides an elegant means to achieve the quantum regime. In this dissertation, I provide context to the successful cavity-based optical detection of the quantum-ground-state motion of atoms-based mechanical elements; mechanical elements, consisting of the collective center-of-mass (CM) motion of ultracold atomic ensembles and prepared inside a high-finesse Fabry-P'erot cavity, were dispersively probed with an average intracavity photon number as small as 0.1. I first show that cavity optomechanics emerges from the theory of cavity quantum electrodynamics when one takes into account the CM motion of one or many atoms within the cavity, and provide a simple theoretical framework to model optomechanical interactions. I then outline details regarding the apparatus and the experimental methods employed, highlighting certain fundamental aspects of optical detection along the way. Finally, I describe background information, both theoretical and experimental, to two published results on quantum cavity optomechanics that form the backbone of this dissertation. The first publication shows the observation of zero-point collective motion of several thousand atoms and quantum-limited measurement backaction on that observed motion. The second publication demonstrates that an array of near-ground-state collective atomic oscillators can be simultaneously prepared and probed, and that the motional state of one oscillator can be selectively addressed while preserving the near-zero-point motion of neighboring oscillators.
Cavity Optomechanics, that is the study of the interaction between an optical cavity mode and a mechanical degree of freedom, has known impressive evolution over the past decade, to become a new field at the union of condensed matter physics and optics. One of the major goals of this discipline is to test and study quantum mechanics using macroscopic systems. Among the most fundamental problems the community aims to address is the question of the quantum limits in position measurement. Quantum mechanics predicts that any measurement comes along with a backaction, which perturbs the state of the measured system. Moreover, it is expected to be conjugated with the quantum noise of the measurement apparatus (called measurement noise) used to probe the system. The optimal sensitivity is reached whenever both the measurement and the backaction noise are identical, a situation which can be assimilated to the acceptance of Heisenberg's inequality for the measurement apparatus. In cavity optomechanics, the mode of an optical cavity is used as a measurement apparatus of the position of a mechanical resonator which is expected to be responsible for the backaction imprecision. However, this so-called radiation pressure quantum backaction has never been observed to date, while it remains a decisive step towards understanding quantum measurement processes. We describe in this manuscript the study of radiation pressure effects in cavity optomechanics. We introduce the optomechanical system we have developed, which consists in a cm-scale ultra high Q (~ 1 000 000) plano-convex mechanical resonator incorporated into a ultra-high finesse (~ 300 000) Fabry-Prot cavity. We present two important results we obtained with this system. First, we were able to report the first direct observation of radiation pressure in real-time, based on establishing pump-probe correlations. We were also able to demonstrate for the first time nonlinear backaction effects related to substantial improvement of position measurement sensitivity. We explain why demonstrating quantum backaction requires ultra-high stability of the optical mode. We present important changes made to the previous experimental setup, notably on the laser source, on the detection and the stabilization of the experiment. We then describe a new optomechanical detection technique providing an independent measurement of the cavity detuning. Finally, we present a proof-of-principle experiment allowing to extract quantum optomechanical correlations at room temperature.
In many experiments isolated atoms and ions have been inserted into high-finesse optical resonators for the study of fundamental quantum optics and quantum information. Here, we introduce another application of such a system, as the realization of cavity optomechanics where the collective motion of an atomic ensemble serves the role of a moveable optical element in an optical resonator. Compared with other optomechanical systems, such as those incorporating nanofabricated cantilevers or the large cavity mirrors of gravitational observatories, our cold-atom realization offers direct access to the quantum regime. We describe experimental investigations of optomechanical effects, such as the bistability of collective atomic motion and the first quantification of measurement backaction for a macroscopic object, and discuss future directions for this nascent field.
The motion of sub-atomic particles is characteristically quantum mechanical in nature. In contrast, quantum aspects of the motion of massive, many-atom objects are typically obscured by high phonon occupation and thermal noise. This contrast is now diminishing, owing to research efforts to bring the control and measurement of macroscopic motion fully into the quantum regime, using objects with masses from attograms to kilograms. This achievement will be critical for constructing force detectors sensitive to gravitational waves, verifying the correspondence principle at macroscopic scales, and realizing protocols that mechanically store and exchange quantum information. Here, we directly observe the quantization of the collective motion of an ultracold atomic ensemble by measuring the inability of a 0.6 attogram centre-of-mass mode to emit energy from its ground state. Moreover, the optical output of our strongly coupled cavity-optomechanical system contains a spectroscopic record of the energy exchanged between light and motion, directly quantifying the heat deposited by a quantum position measurement's backaction. These results, in addition to providing a method for calibrating the motion of low-occupation mechanical systems, offer new possibilities for investigating collective modes of degenerate gases and for diagnosing optomechanical measurement backaction.
The quantum nature of light makes it a basic component for models of quantum measurement and information exchange between disparate quantum modes, pioneered in the field of cavity quantum electrodynamics. The interaction of atomic ensembles with the mode of an optical cavity provides a flexible platform for exploring the coherent interaction of light with diverse macroscopic dynamics, such as collective motion and spin. This dissertation presents experimental results and theoretical models for continuous measurement and control of the center of mass motion and collective spin precession of an atomic ensemble, mediated by coupling to a high-finesse optical cavity. First, the theory of dispersive coupling between the cavity mode and the collective motion and spin of an atomic ensemble is derived, and then a general time-domain formalism is developed for theoretical analysis of multi-mode optodynamical systems. Single-mode optodynamical effects are introduced through experimental demonstrations of measurement and control of the collective atomic spin, providing a close analogy to cavity optomechanics.Next, multiple collective atomic modes are considered within a single cavity, in order to assemble optically mediated interactions within multi-mode optodynamical systems. A demonstration of optodynamical interactions between the center of mass motion of two atomic ensembles is presented, coupled through an optical spring mediated by the cavity mode. Then simultaneous coupling of the center of mass motion and total spin precession of a single ensemble of atoms is described, yielding an experimental realization of a negative-mass instability, facilitated by the novel resource of the spin ensembles inverted state. A theoretical analysis of the negative-mass instability is presented, which indicates the possibility of generating two-mode squeezed states in the absence of excess incoherent noise. Finally, linear state retrodiction from the optodynamical signals is discussed, providing background and supplemental material for a forthcoming manuscript.