Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Joint Conference of the European Frequency and Time Forum and IEEE International Frequency Control Symposium (EFTF/IFCS)

Research on Cs active Faraday optical frequency standard with 459 nm laser pumping

Xiaogang Zhang, Zhaojie Jiang, Zhiming Tao, Haosen Shang, Chi Zhang, Jingbiao Chen

Published May 1, 2016• 1 citation
Publisher

Abstract

Known as a unique optical clock, active optical clock has prior advantages to surpass the limitation of the conventional optical clock in potential stability. In this paper, we proposed an improved Cesium active Faraday optical frequency standard with 459 nm laser pumping. This scheme reduces the residual Doppler broadening in previous results with 852 nm laser pumping. The transmission is 2.4% and the bandwidth of the transmission peak is 12.3 MHz. It greatly narrows the bandwidth of Faraday anomalous dispersion optical filter and decreases the length of the bad cavity used in Cesium active Faraday optical frequency standard. This will be very helpful for further suppression of cavity pulling effect.

DOI
10.1109/fcs.2016.7546767

Related papers

Lasing of cesium active optical clock with 459 nm laser pumping

Duo Pan, Zhichao Xu, Xiaobo Xue +2 more

We realize the lasing of cesium active optical clock with 459 nm laser pumping, which operates deep in the optical bad-cavity regime. The ratio between cavity bandwidth and gain bandwidth is 55.08 theoretically. With 459 nm laser pumping, the population inversion occurs between the cesium 7S1/2state and 6P3/2state, and the stimulated radiation between the two states is realized. The 1469.9 nm output signal of cesium active optical clock can reach a power of 8 μW. The output power also shows a threshold character with pumping laser power and can be influenced by the Cs cell temperature. This active optical clock has an advantage in stability over the conventional optical clocks, due to its suppression of cavity pulling effect, which is also demonstrated experimentally.

Joint Conference of the European Frequency and Time Forum and IEEE International Frequency Control Symposium (EFTF/IFCS)•May 1, 2014•18 citations

Lasing and suppressed cavity-pulling effect of Cesium active optical clock

Zhichao Xu, Wei Zhuang, Jingbiao Chen

We experimentally demonstrate the collective emission behavior and suppressed cavity-pulling effect of four-level active optical clock with Cesium atoms. Thermal Cesium atoms in a glass cell velocity selective pumped with a 455.5 nm laser operating at 6S$_{1/2}$ to 7P$_{3/2}$ transition are used as lasing medium. Population inverted Cesium atoms between 7S$_{1/2}$ and 6P$_{3/2}$ levels are optical weakly coupled by a pair cavity mirrors working at deep bad-cavity regime with a finesse of 4.3, and the ratio between cavity bandwidth and gain bandwidth is approximately 45. With increased 455.5 nm pumping laser intensity, the output power of cesium active optical clock at 1469.9 nm from 7S$_{1/2}$ level to 6P$_{3/2}$ level shows a threshold and reach a power of 13 $μ$W. Active optical clock would dramatically improve the optical clock stability since the lasing frequency does not follow the cavity length variation exactly, but in a form of suppressed cavity pulling effect. In this letter the cavity pulling effect is measured using a Fabry-Perot interferometer (FPI) to be reduced by a factor of 38.2 and 41.4 as the detuning between the 1469.9 nm cavity length of the Cs active optical clock and the Cs 1469.9 nm transition is set to be 140.8 MHz and 281.6 MHz respectively. The mechanism demonstrated here is of great significance for new generation optical clocks and can be applied to improve the stability of best optical clocks by at least two orders of magnitude.

arXiv:1404.6021•Apr 24, 2014•7 citations

Active Faraday optical frequency standard

Wei Zhuang, Jingbiao Chen

We propose the mechanism of an active Faraday optical clock, and experimentally demonstrate an active Faraday optical frequency standard based on narrow bandwidth Faraday atomic filter by the method of velocity-selective optical pumping of cesium vapor. The center frequency of the active Faraday optical frequency standard is determined by the cesium 6 (2)S(1/2) F=4 to 6 (2)P(3/2) F'=4 and 5 crossover transition line. The optical heterodyne beat between two similar independent setups shows that the frequency linewidth reaches 281(23) Hz, which is 1.9×10(4) times smaller than the natural linewidth of the cesium 852-nm transition line. The maximum emitted light power reaches 75 μW. The active Faraday optical frequency standard reported here has advantages of narrow linewidth and reduced cavity pulling, which can readily be extended to other atomic transition lines of alkali and alkaline-earth metal atoms trapped in optical lattices at magic wavelengths, making it useful for new generation of optical atomic clocks.

arXiv:1407.3428•Optics Letters•Oct 29, 2014•60 citations

Active Optical Clock Based on Laser Cooling of Alkali-metal Atoms

Tiantian Shi, Duo Pan, Wei Zhuang +4 more

Two feasible schemes are proposed by laser cooling of alkali atoms to realize the narrow-linewidth, continual superradiant lasing. Utilizing the D1 gray molasses to realize a cloud of cold Cs atoms for the two-level Faraday active optical clock (AOC), the effect of Doppler broadening on the transmission bandwidth of Faraday atomic filter will be effectively suppressed to the level of natural linewidth. Thus, the influence of mechanical or thermal vibrations of cavity mirrors on the clock laser will be decreased by about 102 times, which is expected to further narrow the laser linewidth by two orders of magnitude compared with the thermal atomic Faraday AOC to Hz level. Moreover, the four-level AOC based on the narrow linewidth cooling of Cs atoms using the 6S-7P transition is proposed. The 455 nm laser at 6S1/2-7P3/2transition plays two roles simultaneously, one is the cooling laser for a magneto-optical trap (MOT), another is the pumping laser for population inversion of 1470 nm clock transition, which is helpful to improve the compactness of the system. In the four-level structure, the frequency of pumping laser is far detuning from that of clock laser, therefore, the light shift resulting from the 455 nm laser is negligible. This four-level AOC based on cold atoms will further reduce the collision shift in thermal atom system to achieve a high-precision optical frequency reference.

Joint Conference of the European Frequency and Time Forum and IEEE International Frequency Control Symposium (EFTF/IFCS)•Jul 7, 2021•2 citations

Active optical frequency standard based on narrow bandwidth Faraday atomic filter

Xiaogang Zhang, Jingbiao Chen, Wei Zhuang

Active optical frequency standard based on narrow bandwidth Faraday atomic filter is proposed. The output laser power achieved to 42 µW. The laser frequency is determined by narrow bandwidth Faraday atomic filter, corresponding to the Cs 62S1/2F=4 to 62P3/2F′=4, 5 crossover transition line. The transmission of the Faraday atomic filter is 23% and the bandwidth is 52.6MHz. Considering the loss in the cavity, the linewidth of the cavity mode is 345.1MHz. The bad cavity coefficient is 6.6. Working in the bad cavity scheme, the output laser signal of active Faraday optical frequency standard is insensitive to the cavity vibration and thermal noise. Besides, we redesign an integrated structure to decrease the influence of the environmental vibration. With more steady structure, hundreds of millihertz level of the active Faraday optical frequency linewidth is expected.

Joint Conference of the European Frequency and Time Forum and IEEE International Frequency Control Symposium (EFTF/IFCS)•Apr 1, 2015•3 citations

Lasing of Cesium four-level active optical clock

Zhichao Xu, Wei Zhuang, Yanfei Wang +5 more

We are setting up an experiment to investigate an active optical clock scheme in four-level configuration with Cesium atoms. The 1469 nm Cesium active optical clock output in a bad cavity laser regime is generated and the wavelength is measured to be 1469.500 nm by using spectrometer. The 1469 nm lasing threshold and output power is measured when changing 455 nm pumping laser power and frequency. The 1469 nm Cesium active optical clock output multi-threshold is observed when changing bad-cavity length. We also sweep the bad-cavity length and measure the 1469 nm Cesium active optical clock output frequency using a wavelength meter, proving the cavity-pulling reduction due to the bad-cavity effect.

Joint Conference of the European Frequency and Time Forum and IEEE International Frequency Control Symposium (EFTF/IFCS)•Jul 1, 2013•13 citations
Known as a unique optical clock, active optical clock has prior advantages to surpass the limitation of the conventional optical clock in potential stability. In this paper, we proposed an improved Cesium active Faraday optical frequency standard with 459 nm laser pumping. This scheme reduces the residual Doppler broadening in previous results with 852 nm laser pumping. The transmission is 2.4% and the bandwidth of the transmission peak is 12.3 MHz. It greatly narrows the bandwidth of Faraday anomalous dispersion optical filter and decreases the length of the bad cavity used in Cesium active Faraday optical frequency standard. This will be very helpful for further suppression of cavity pulling effect.
We realize the lasing of cesium active optical clock with 459 nm laser pumping, which operates deep in the optical bad-cavity regime. The ratio between cavity bandwidth and gain bandwidth is 55.08 theoretically. With 459 nm laser pumping, the population inversion occurs between the cesium 7S1/2state and 6P3/2state, and the stimulated radiation between the two states is realized. The 1469.9 nm output signal of cesium active optical clock can reach a power of 8 μW. The output power also shows a threshold character with pumping laser power and can be influenced by the Cs cell temperature. This active optical clock has an advantage in stability over the conventional optical clocks, due to its suppression of cavity pulling effect, which is also demonstrated experimentally.
We experimentally demonstrate the collective emission behavior and suppressed cavity-pulling effect of four-level active optical clock with Cesium atoms. Thermal Cesium atoms in a glass cell velocity selective pumped with a 455.5 nm laser operating at 6S1/2_{1/2}1/2​ to 7P3/2_{3/2}3/2​ transition are used as lasing medium. Population inverted Cesium atoms between 7S1/2_{1/2}1/2​ and 6P3/2_{3/2}3/2​ levels are optical weakly coupled by a pair cavity mirrors working at deep bad-cavity regime with a finesse of 4.3, and the ratio between cavity bandwidth and gain bandwidth is approximately 45. With increased 455.5 nm pumping laser intensity, the output power of cesium active optical clock at 1469.9 nm from 7S1/2_{1/2}1/2​ level to 6P3/2_{3/2}3/2​ level shows a threshold and reach a power of 13 μμμW. Active optical clock would dramatically improve the optical clock stability since the lasing frequency does not follow the cavity length variation exactly, but in a form of suppressed cavity pulling effect. In this letter the cavity pulling effect is measured using a Fabry-Perot interferometer (FPI) to be reduced by a factor of 38.2 and 41.4 as the detuning between the 1469.9 nm cavity length of the Cs active optical clock and the Cs 1469.9 nm transition is set to be 140.8 MHz and 281.6 MHz respectively. The mechanism demonstrated here is of great significance for new generation optical clocks and can be applied to improve the stability of best optical clocks by at least two orders of magnitude.
We propose the mechanism of an active Faraday optical clock, and experimentally demonstrate an active Faraday optical frequency standard based on narrow bandwidth Faraday atomic filter by the method of velocity-selective optical pumping of cesium vapor. The center frequency of the active Faraday optical frequency standard is determined by the cesium 6 (2)S(1/2) F=4 to 6 (2)P(3/2) F'=4 and 5 crossover transition line. The optical heterodyne beat between two similar independent setups shows that the frequency linewidth reaches 281(23) Hz, which is 1.9×10(4) times smaller than the natural linewidth of the cesium 852-nm transition line. The maximum emitted light power reaches 75 μW. The active Faraday optical frequency standard reported here has advantages of narrow linewidth and reduced cavity pulling, which can readily be extended to other atomic transition lines of alkali and alkaline-earth metal atoms trapped in optical lattices at magic wavelengths, making it useful for new generation of optical atomic clocks.
Two feasible schemes are proposed by laser cooling of alkali atoms to realize the narrow-linewidth, continual superradiant lasing. Utilizing the D1 gray molasses to realize a cloud of cold Cs atoms for the two-level Faraday active optical clock (AOC), the effect of Doppler broadening on the transmission bandwidth of Faraday atomic filter will be effectively suppressed to the level of natural linewidth. Thus, the influence of mechanical or thermal vibrations of cavity mirrors on the clock laser will be decreased by about 102 times, which is expected to further narrow the laser linewidth by two orders of magnitude compared with the thermal atomic Faraday AOC to Hz level. Moreover, the four-level AOC based on the narrow linewidth cooling of Cs atoms using the 6S-7P transition is proposed. The 455 nm laser at 6S1/2-7P3/2transition plays two roles simultaneously, one is the cooling laser for a magneto-optical trap (MOT), another is the pumping laser for population inversion of 1470 nm clock transition, which is helpful to improve the compactness of the system. In the four-level structure, the frequency of pumping laser is far detuning from that of clock laser, therefore, the light shift resulting from the 455 nm laser is negligible. This four-level AOC based on cold atoms will further reduce the collision shift in thermal atom system to achieve a high-precision optical frequency reference.
Active optical frequency standard based on narrow bandwidth Faraday atomic filter is proposed. The output laser power achieved to 42 µW. The laser frequency is determined by narrow bandwidth Faraday atomic filter, corresponding to the Cs 62S1/2F=4 to 62P3/2F′=4, 5 crossover transition line. The transmission of the Faraday atomic filter is 23% and the bandwidth is 52.6MHz. Considering the loss in the cavity, the linewidth of the cavity mode is 345.1MHz. The bad cavity coefficient is 6.6. Working in the bad cavity scheme, the output laser signal of active Faraday optical frequency standard is insensitive to the cavity vibration and thermal noise. Besides, we redesign an integrated structure to decrease the influence of the environmental vibration. With more steady structure, hundreds of millihertz level of the active Faraday optical frequency linewidth is expected.
We are setting up an experiment to investigate an active optical clock scheme in four-level configuration with Cesium atoms. The 1469 nm Cesium active optical clock output in a bad cavity laser regime is generated and the wavelength is measured to be 1469.500 nm by using spectrometer. The 1469 nm lasing threshold and output power is measured when changing 455 nm pumping laser power and frequency. The 1469 nm Cesium active optical clock output multi-threshold is observed when changing bad-cavity length. We also sweep the bad-cavity length and measure the 1469 nm Cesium active optical clock output frequency using a wavelength meter, proving the cavity-pulling reduction due to the bad-cavity effect.