Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Weighted QMC rules - Stop anywhere

Dirk Nuyens

Published Sep 1, 2009• 0 citations
OpenAlex

Abstract

We study the worst case integration error of combinations of quadrature rules in a reproducing kernel Hilbert space. We show that the error, with respect to the total number $N$ of function evaluations used, cannot decrease faster than $O(N^{-1})$ for an equal-weight rule. However, if the errors of the quadrature rules constituting a compound rule have an order of convergence $O(N^{-\alpha})$ for $\alpha>1$ then, by introducing weights, this order of convergence can be shown to be recovered for the compound rule. The theory applies to lattice sequences as well as digital sequences.

Related papers

On higher order of convergence using lattice sequences

Dirk Nuyens, Fred J. Hickernell, Peter Kritzer +1 more

We study the worst case integration error of combinations of quadrature rules in a reproducing kernel Hilbert space. We show that the error, with respect to the total number N of function evaluations used, cannot decrease faster than O(N^{-1}) in the case where several quasi-Monte Carlo rules are combined to a compound quasi-Monte Carlo rule. However, if the errors of the quadrature rules constituting the compound rule have an order of convergence O(N^{-a}) for a > 1 then, by introducing weights, this order of convergence can be shown to be recovered for the compound rule. We apply our results to the case of lattice sequences.

•Feb 1, 2009•0 citations

High-dimensional integration: The quasi-Monte Carlo way

Josef Dick, Frances Y. Kuo, Ian H. Sloan

This paper is a contemporary review of QMC (‘quasi-Monte Carlo’) methods, that is, equal-weight rules for the approximate evaluation of high-dimensional integrals over the unit cube [0,1] s , where s may be large, or even infinite. After a general introduction, the paper surveys recent developments in lattice methods, digital nets, and related themes. Among those recent developments are methods of construction of both lattices and digital nets, to yield QMC rules that have a prescribed rate of convergence for sufficiently smooth functions, and ideally also guaranteed slow growth (or no growth) of the worst-case error as s increases. A crucial role is played by parameters called ‘weights’, since a careful use of the weight parameters is needed to ensure that the worst-case errors in an appropriately weighted function space are bounded, or grow only slowly, as the dimension s increases. Important tools for the analysis are weighted function spaces, reproducing kernel Hilbert spaces, and discrepancy, all of which are discussed with an appropriate level of detail.

Acta Numerica•Apr 2, 2013•648 citations

QUASI-MONTE CARLO METHODS FOR HIGH-DIMENSIONAL INTEGRATION: THE STANDARD (WEIGHTED HILBERT SPACE) SETTING AND BEYOND

Frances Y. Kuo, Christoph Schwab, Ian H. Sloan

Abstract This paper is a contemporary review of quasi-Monte Carlo (QMC) methods, that is, equal-weight rules for the approximate evaluation of high-dimensional integrals over the unit cube [0,1] s . It first introduces the by-now standard setting of weighted Hilbert spaces of functions with square-integrable mixed first derivatives, and then indicates alternative settings, such as non-Hilbert spaces, that can sometimes be more suitable. Original contributions include the extension of the fast component-by-component (CBC) construction of lattice rules that achieve the optimal convergence order (a rate of almost 1/ N , where N is the number of points, independently of dimension) to so-called “product and order dependent” (POD) weights, as seen in some recent applications. Although the paper has a strong focus on lattice rules, the function space settings are applicable to all QMC methods. Furthermore, the error analysis and construction of lattice rules can be adapted to polynomial lattice rules from the family of digital nets.

ANZIAM Journal•Jul 1, 2011•87 citations

Construction of lattice rules for multiple integration based on a weighted discrepancy

Vasile Sinescu

High-dimensional integrals arise in a variety of areas, including quantum physics, the physics and chemistry of molecules, statistical mechanics and more recently, in financial applications. In order to approximate multidimensional integrals, one may use Monte Carlo methods in which the quadrature points are generated randomly or quasi-Monte Carlo methods, in which points are generated deterministically. One particular class of quasi-Monte Carlo methods for multivariate integration is represented by lattice rules. Lattice rules constructed throughout this thesis allow good approximations to integrals of functions belonging to certain weighted function spaces. These function spaces were proposed as an explanation as to why integrals in many variables appear to be successfully approximated although the standard theory indicates that the number of quadrature points required for reasonable accuracy would be astronomical because of the large number of variables. The purpose of this thesis is to contribute to theoretical results regarding the construction of lattice rules for multiple integration. We consider both lattice rules for integrals over the unit cube and lattice rules suitable for integrals over Euclidean space. The research reported throughout the thesis is devoted to finding the generating vector required to produce lattice rules that have what is termed a low weighted discrepancy . In simple terms, the discrepancy is a measure of the uniformity of the distribution of the quadrature points or in other settings, a worst-case error. One of the assumptions used in these weighted function spaces is that variables are arranged in the decreasing order of their importance and the assignment of weights in this situation results in so-called product weights . In other applications it is rather the importance of group of variables that matters. This situation is modelled by using function spaces in which the weights are general . In the weighted settings mentioned above, the quality of the lattice rules is assessed by the weighted discrepancy mentioned earlier. Under appropriate conditions on the weights, the lattice rules constructed here produce a convergence rate of the error that ranges from O(n−1/2) to the (believed) optimal O(n−1+δ) for any δ gt 0, with the involved constant independent of the dimension.

•Jan 1, 2008•0 citations

Richardson Extrapolation of Polynomial Lattice Rules

Josef Dick, Takashi Goda, Takehito Yoshiki

We study multivariate numerical integration of smooth functions in weighted Sobolev spaces with dominating mixed smoothness $\alpha\geq 2$ defined over the $s$-dimensional unit cube. We propose a new quasi-Monte Carlo (QMC)-based quadrature rule, named the extrapolated polynomial lattice rule, which achieves the almost optimal rate of convergence. Extrapolated polynomial lattice rules are constructed in two steps: (i) construction of classical polynomial lattice rules over $\Bbb{F}_b$ with $\alpha$ consecutive sizes of nodes, $b^{m-\alpha+1},\ldots,b^{m}$, and (ii) recursive application of Richardson extrapolation to a chain of $\alpha$ approximate values of the integral obtained by consecutive polynomial lattice rules. We prove the existence of good extrapolated polynomial lattice rules achieving the almost optimal order of convergence of the worst-case error in Sobolev spaces with general weights. Then, by restricting to product weights, we show that such good extrapolated polynomial lattice rules can be constructed by the fast component-by-component algorithm under a computable quality criterion. The required total construction cost is of order $(s+\alpha)N\log N$, which improves the currently known result for the interlaced polynomial lattice rule, which is of order $s\alpha N\log N$. We also study the dependence of the worst-case error bound on the dimension. A big advantage of our method compared to interlaced polynomial lattice rules is that the fast QMC matrix vector method can be used in this setting, while still achieving the same rate of convergence. Such a method was previously not known. Numerical experiments for test integrands support our theoretical result.

arXiv:1707.03989•SIAM Journal on Numerical Analysis•Jan 1, 2019•10 citations

Weighted integration over a hyperrectangle based on digital nets and sequences

Josef Dick, Friedrich Pillichshammer

Quasi-Monte Carlo (QMC) methods are equal weight quadrature rules to approximate integrals over the unit cube with respect to the uniform measure. In this paper we discuss QMC integration with respect to general product measures defined on an arbitrary hyperrectangle. We only require that the cumulative distribution function is invertible. We develop a worst-case error bound and study the dependence of the error on the number of points and the dimension for digital nets and sequences as well as polynomial lattice point sets, which are mapped to the domain using the inverse cumulative distribution function. We do not require any smoothness properties of the probability density function and the worst-case error does not depend on the particular choice of density function and its smoothness. The component-by-component construction of polynomial lattice rules is based on a criterion which depends only on the size of the hyperrectangle but is otherwise independent of the product measure.

Journal of Computational and Applied Mathematics•Mar 7, 2021•3 citations
We study the worst case integration error of combinations of quadrature rules in a reproducing kernel Hilbert space. We show that the error, with respect to the total number NNN of function evaluations used, cannot decrease faster than O(N−1)O(N^{-1})O(N−1) for an equal-weight rule. However, if the errors of the quadrature rules constituting a compound rule have an order of convergence O(N−α)O(N^{-\alpha})O(N−α) for α>1\alpha>1α>1 then, by introducing weights, this order of convergence can be shown to be recovered for the compound rule. The theory applies to lattice sequences as well as digital sequences.
We study the worst case integration error of combinations of quadrature rules in a reproducing kernel Hilbert space. We show that the error, with respect to the total number N of function evaluations used, cannot decrease faster than O(N^{-1}) in the case where several quasi-Monte Carlo rules are combined to a compound quasi-Monte Carlo rule. However, if the errors of the quadrature rules constituting the compound rule have an order of convergence O(N^{-a}) for a > 1 then, by introducing weights, this order of convergence can be shown to be recovered for the compound rule. We apply our results to the case of lattice sequences.
This paper is a contemporary review of QMC (‘quasi-Monte Carlo’) methods, that is, equal-weight rules for the approximate evaluation of high-dimensional integrals over the unit cube [0,1] s , where s may be large, or even infinite. After a general introduction, the paper surveys recent developments in lattice methods, digital nets, and related themes. Among those recent developments are methods of construction of both lattices and digital nets, to yield QMC rules that have a prescribed rate of convergence for sufficiently smooth functions, and ideally also guaranteed slow growth (or no growth) of the worst-case error as s increases. A crucial role is played by parameters called ‘weights’, since a careful use of the weight parameters is needed to ensure that the worst-case errors in an appropriately weighted function space are bounded, or grow only slowly, as the dimension s increases. Important tools for the analysis are weighted function spaces, reproducing kernel Hilbert spaces, and discrepancy, all of which are discussed with an appropriate level of detail.
Abstract This paper is a contemporary review of quasi-Monte Carlo (QMC) methods, that is, equal-weight rules for the approximate evaluation of high-dimensional integrals over the unit cube [0,1] s . It first introduces the by-now standard setting of weighted Hilbert spaces of functions with square-integrable mixed first derivatives, and then indicates alternative settings, such as non-Hilbert spaces, that can sometimes be more suitable. Original contributions include the extension of the fast component-by-component (CBC) construction of lattice rules that achieve the optimal convergence order (a rate of almost 1/ N , where N is the number of points, independently of dimension) to so-called “product and order dependent” (POD) weights, as seen in some recent applications. Although the paper has a strong focus on lattice rules, the function space settings are applicable to all QMC methods. Furthermore, the error analysis and construction of lattice rules can be adapted to polynomial lattice rules from the family of digital nets.
High-dimensional integrals arise in a variety of areas, including quantum physics, the physics and chemistry of molecules, statistical mechanics and more recently, in financial applications. In order to approximate multidimensional integrals, one may use Monte Carlo methods in which the quadrature points are generated randomly or quasi-Monte Carlo methods, in which points are generated deterministically. One particular class of quasi-Monte Carlo methods for multivariate integration is represented by lattice rules. Lattice rules constructed throughout this thesis allow good approximations to integrals of functions belonging to certain weighted function spaces. These function spaces were proposed as an explanation as to why integrals in many variables appear to be successfully approximated although the standard theory indicates that the number of quadrature points required for reasonable accuracy would be astronomical because of the large number of variables. The purpose of this thesis is to contribute to theoretical results regarding the construction of lattice rules for multiple integration. We consider both lattice rules for integrals over the unit cube and lattice rules suitable for integrals over Euclidean space. The research reported throughout the thesis is devoted to finding the generating vector required to produce lattice rules that have what is termed a low weighted discrepancy . In simple terms, the discrepancy is a measure of the uniformity of the distribution of the quadrature points or in other settings, a worst-case error. One of the assumptions used in these weighted function spaces is that variables are arranged in the decreasing order of their importance and the assignment of weights in this situation results in so-called product weights . In other applications it is rather the importance of group of variables that matters. This situation is modelled by using function spaces in which the weights are general . In the weighted settings mentioned above, the quality of the lattice rules is assessed by the weighted discrepancy mentioned earlier. Under appropriate conditions on the weights, the lattice rules constructed here produce a convergence rate of the error that ranges from O(n−1/2) to the (believed) optimal O(n−1+δ) for any δ gt 0, with the involved constant independent of the dimension.
We study multivariate numerical integration of smooth functions in weighted Sobolev spaces with dominating mixed smoothness α≥2\alpha\geq 2α≥2 defined over the sss-dimensional unit cube. We propose a new quasi-Monte Carlo (QMC)-based quadrature rule, named the extrapolated polynomial lattice rule, which achieves the almost optimal rate of convergence. Extrapolated polynomial lattice rules are constructed in two steps: (i) construction of classical polynomial lattice rules over Fb\Bbb{F}_bFb​ with α\alphaα consecutive sizes of nodes, bm−α+1,…,bmb^{m-\alpha+1},\ldots,b^{m}bm−α+1,…,bm, and (ii) recursive application of Richardson extrapolation to a chain of α\alphaα approximate values of the integral obtained by consecutive polynomial lattice rules. We prove the existence of good extrapolated polynomial lattice rules achieving the almost optimal order of convergence of the worst-case error in Sobolev spaces with general weights. Then, by restricting to product weights, we show that such good extrapolated polynomial lattice rules can be constructed by the fast component-by-component algorithm under a computable quality criterion. The required total construction cost is of order (s+α)Nlog⁡N(s+\alpha)N\log N(s+α)NlogN, which improves the currently known result for the interlaced polynomial lattice rule, which is of order sαNlog⁡Ns\alpha N\log NsαNlogN. We also study the dependence of the worst-case error bound on the dimension. A big advantage of our method compared to interlaced polynomial lattice rules is that the fast QMC matrix vector method can be used in this setting, while still achieving the same rate of convergence. Such a method was previously not known. Numerical experiments for test integrands support our theoretical result.
Quasi-Monte Carlo (QMC) methods are equal weight quadrature rules to approximate integrals over the unit cube with respect to the uniform measure. In this paper we discuss QMC integration with respect to general product measures defined on an arbitrary hyperrectangle. We only require that the cumulative distribution function is invertible. We develop a worst-case error bound and study the dependence of the error on the number of points and the dimension for digital nets and sequences as well as polynomial lattice point sets, which are mapped to the domain using the inverse cumulative distribution function. We do not require any smoothness properties of the probability density function and the worst-case error does not depend on the particular choice of density function and its smoothness. The component-by-component construction of polynomial lattice rules is based on a criterion which depends only on the size of the hyperrectangle but is otherwise independent of the product measure.