The clear distinction between metals and insulators is a well established and appartently simple concept which can be clarified by studying the behavior of the electrical conductivity. However, a theoretical description of the processes leading to one of the two extremes is no trivial task. The widely accepted band structure theory relies on an one-electron picture to characterize the metallic/insulating behavior of a material. However, in spite of the fact that it can be used to make successful predictions, this description does not capture one of the essential elements characterizing the nature of an electronic quantum system, i.e. the electron correlation. The key to the different behaviors is clearly contained in the correlated many- electron wave function, but the analysis of such a high-dimensional object in configuration space can be quite cumbersome. Therefore the development of powerful tools to simplify this task is necessary. The total position-spread (TPS) tensor, which was derived by Walter Kohn’s theory of the insulating state, plays a key role in the field of metal-insulator transitions (MITs). This tool provides information about the electron localization, which is strongly connected to the electrical conductivity. Therefore, in this work particular attention was paid to the calculation of the TPS tensor of small and extended systems. Moreover, part of this thesis focuses on a new formalism, which allows the study of spin mobility and spin entanglement and provides therefore deeper insight into the effects of electron correlation. In the framework of quantum information theory (QIT), the quantum entanglement can be quantified by means of measures such as the von Neumann entropy. Also, the analysis of the elements of the two-orbital reduced density matrix provides an overview of the complexity of the many-electron wave function. These insights were used in this work for the analysis of the metallic/insulating character of a system. However, in order to perform such investigastions, the problem of achieving an accurate description of the many- electron wave function has to be dealt with. Despite the tremedous progress in the efficiency of quantum-chemical methods, the treatement of extended systems using standard approaches is still a difficult (if not unfeasible) task. Therefore the development and testing of sophisticated, low-scaling methods is currently the subject of many investigations. In this work, two approaches were employed: 1) the ab-initio density matrix renormalization group (DMRG) approach which, based on a tensor product ansatz, provides very precise results and exploits QIT to improve its performance; 2) the method of increments (MoI) which, using a many-body expansion in terms of localized orbitals, yields accurate correlation energies. By using both methods on strongly correlated one-dimesional model systems, we worked on a new formalism of the method of increments which can be used to describe the whole dissociation curve without inconvenient discontinuities. Finally, aiming to calculate the total position-spread tensor of extended systems, we worked on the application of the MoI for quantities other than the correlation energy.
The clear distinction between metals and insulators is a well established and appartently simple concept which can be clarified by studying the behavior of the electrical conductivity. However, a theoretical description of the processes leading to one of the two extremes is no trivial task. The widely accepted band structure theory relies on an one-electron picture to characterize the metallic/insulating behavior of a material. However, in spite of the fact that it can be used to make successful predictions, this description does not capture one of the essential elements characterizing the nature of an electronic quantum system, i.e. the electron correlation. The key to the different behaviors is clearly contained in the correlated many- electron wave function, but the analysis of such a high-dimensional object in configuration space can be quite cumbersome. Therefore the development of powerful tools to simplify this task is necessary. The total position-spread (TPS) tensor, which was derived by Walter Kohn’s theory of the insulating state, plays a key role in the field of metal-insulator transitions (MITs). This tool provides information about the electron localization, which is strongly connected to the electrical conductivity. Therefore, in this work particular attention was paid to the calculation of the TPS tensor of small and extended systems. Moreover, part of this thesis focuses on a new formalism, which allows the study of spin mobility and spin entanglement and provides therefore deeper insight into the effects of electron correlation. In the framework of quantum information theory (QIT), the quantum entanglement can be quantified by means of measures such as the von Neumann entropy. Also, the analysis of the elements of the two-orbital reduced density matrix provides an overview of the complexity of the many-electron wave function. These insights were used in this work for the analysis of the metallic/insulating character of a system. However, in order to perform such investigastions, the problem of achieving an accurate description of the many- electron wave function has to be dealt with. Despite the tremedous progress in the efficiency of quantum-chemical methods, the treatement of extended systems using standard approaches is still a difficult (if not unfeasible) task. Therefore the development and testing of sophisticated, low-scaling methods is currently the subject of many investigations. In this work, two approaches were employed: 1) the ab-initio density matrix renormalization group (DMRG) approach which, based on a tensor product ansatz, provides very precise results and exploits QIT to improve its performance; 2) the method of increments (MoI) which, using a many-body expansion in terms of localized orbitals, yields accurate correlation energies. By using both methods on strongly correlated one-dimesional model systems, we worked on a new formalism of the method of increments which can be used to describe the whole dissociation curve without inconvenient discontinuities. Finally, aiming to calculate the total position-spread tensor of extended systems, we worked on the application of the MoI for quantities other than the correlation energy.
Electronic structure theory faces many computational challenges in transition metal chemistry. Usually, density functional theory is the method of choice for theoretical studies on transition metal complexes and clusters mostly because it is the only feasible one, although its results are not systematically improvable. By contrast, multireference ab initio methods could provide a correct description of the electronic structure, but are limited to small molecules because of the tremendous computational resources required. In recent years, conceptually new ab initio methods emerged that turned out to be promising for theoretical coordination chemistry. We review and discuss two efficient parametrization schemes for the electronic wave function, the matrix product states and the complete-graph tensor network states. Their advantages are demonstrated at example transition metal complexes. Especially, tensor network states might provide the key to accurately describe strongly correlated and magnetic molecular systems in transition metal chemistry.
The many-body correlation between electrons is the origin of many fascinating phenomena in condensed matter systems, such as high temperature superconductivity, superfluidity, fractional quantum Hall effect, and Mott insulator. Strongly correlated systems have been an important subject of condensed matter physics for several decades, especially after the discovery of high temperature cuprate superconductors. In this thesis, we apply first principles quantum Monte Carlo (QMC) method to several representative systems to study the electron correlations in transition metal oxides (vanadium dioxide) and low dimensional electronic systems (graphene and graphene-like two dimensional systems). Vanadium dioxide (VO2) is a paradigmatic example of a strongly correlated system that undergoes a metal-insulator transition at a structural phase transition. To date, this transition has necessitated significant post-hoc adjustments to theory in order to be described properly. We apply first principles quantum Monte Carlo (QMC) to study the structural dependence of the properties of VO2. Using this technique, we simulate the interactions between electrons explicitly, which allows for the metal-insulator transition to naturally emerge, importantly without ad-hoc adjustments. The QMC calculations show that the structural transition directly causes the metal-insulator transition and a change in the coupling of vanadium spins. This change in the spin coupling results in a prediction of a momentum-independent magnetic excitation in the insulating state. While two-body correlations are important to set the stage for this transition, they do not change significantly when VO2 becomes an insulator. These results show that it is now possible to account for electron correlations in a quantitatively accurate way that is also specific to materials. Electron correlation in graphene is unique because of the interplay of the Dirac cone dispersion of pi electrons with long range Coulomb interaction. The random phase approximation predicts no metallic screening at long distances and low energies because of the zero density of states at Fermi level. It is thus interesting to see how screening takes place in graphene at different length scales. We addressed this problem by computing the structure factor S(q) and S(q, ω) of freestanding graphene using ab initio fixed-node diffusion Monte Carlo and the random phase approximation. The X-ray measured structure factor is reproduced very accurately using both techniques, provided that sigma-bonding electrons are included in the simulations. Strong dielectric screening from sigma electrons are observed, which redshifts the pi plasmons resonance frequency at long distance and reduces the effective interactions between pi electrons at short distance. The short distance screening makes suspended graphene a weakly correlated semimetal which otherwise would be an insulator. The third piece of works is dedicated to studying the low energy excitation of many-body systems using extended Koopmans' theorem (EKT). The EKT provides a straight forward way to compute charge excitation spectra, such as ionization potentials, electron affinities from any level of theory. We implemented the EKT within the QMC framework, and performed systematic benchmark studies of ionization potentials of the second- and third-row atoms, and closed- and open-shell molecules. We also applied it to compute the quasiparticle band structure of solids (graphene). For complex correlated systems, identifying relevant low energy physics degrees of freedom is extremely important to understanding the system's collective behavior at different length scales. In this sense, bridging the realistic systems to lower energy effective lattice models that involve fewer but important degrees of freedom is significant to understanding correlated systems. We have formulated three ab initio density matrix based downfolding (AIDMD) methods to downfold the ab initio systems into effective lattice models. We have demonstrated the successfulness of these methods by applying them to molecules (H2) and periodic systems (hydrogen chain and graphene).
The study of low-dimensional, strongly-interacting quantum systems has been of interest in the past few decades due to new and exotic physics that show great potential in the advancement of fundamental physics as well as technological applications. In order to investigate such systems, a vast number of techniques have been developed throughout the years, all of which have their respective strengths and weaknesses. In the world of one-dimensional (1D) quantum systems, the density-matrix renormalization group (DMRG) algorithm and matrix product states (MPS) have proven to be powerful and reliable tools that provide invaluable information while providing a wide range of data that support both theoretical and experimental studies. Coupled with the development and refinement of tensor networks - an ansatz for quantum many-body wavefunctions, in particular MPS, the DMRG algorithm has seen a spike of improvements that has pushed the boundaries of its application into more sophisticated and complex systems.This thesis broadly covers the study of several 1D many-body quantum systems represented by infinite MPS (iMPS) - a class of ansatz that represent translationally-invariant, 1D many-body quantum states. More specifically, it is divided into two main parts.The first part investigates the 1D topological Kondo insulator (TKI). This is an effective model designed to investigate how strong interactions between conduction electrons and localized moments result in a symmetry-protected topological (SPT) phase, specifically the Haldane phase. By studying the effect of the electron repulsion as well as the competition between the local and non-local couplings between the electrons and the local moments, it is found that a topological phase transition from the SPT phase to a topologically trivial phase occurs with the assistance of electron interaction. The properties of both topologically trivial and nontrivial groundstates were revealed via means of quantum information theoretic quantities such as the entanglement entropy, entanglement spectrum and non-local order parameters. These quantities unveil the nature, structure and the effect that the different interactions have on the groundstate properties. Besides the phases, the properties of the critical point was studied and classified. By obtaining the critical exponents and central charge, the universality class of this transition was found to be that of 1D free fermions/bosons. Furthermore, the presence of electron interactions was found not to alter this universality class.The second part of this thesis is a project that stems from the necessity to overcome the inherent limitation of an iMPS in representing a system at a cusp of a quantum phase transition (QPT), specifically, in determining the critical point and exponents. In the thermodynamic limit, the laws of statistical mechanics dictates that the system’s correlation length diverges at the critical point. However, when representing a critical state with an iMPS, the finite bond dimension implies that the correlation length of the iMPS remains finite, albeit large. This presents a fundamental challenge in extracting critical data since the critical exponents are defined for systems in the thermodynamic limit. To overcome this shortcoming, finite-entanglement scaling (FES) - the analog of finite-size scaling, has previously been used to locate the critical point and extract the critical exponents for systems represented by finite-bond dimensional iMPS. While FES serves its purpose sufficiently well, the computational cost is high for just about any moderately complex, real-world system. To overcome such difficulties, the second part of this thesis combines new ideas of using higher-order cumulants of the order parameter with previously-known iMPS techniques to determine the critical point and extract the exponents, thus relating statistical mechanics of QPTs and tensor networks of critical states. Some of the main methods used and developed here are FES, the application of the Binder cumulant in iMPS and the new cumulant exponent relation. Putting these tools together provides a scheme that can be used to efficiently locate the critical point and extract the critical exponents at a lower computational cost than previously-known methods. This is shown through comparisons of several exemplary models such as the 1D and quasi-1D transverse field Ising model, the 1D TKI, the S = 1 Heisenberg chain with single-ion anisotropy and the 1D Bose-Hubbard model.
Quantum-mechanical calculations based on Kohn–Sham density functional theory (DFT) played a significant role in accurately predicting various aspects of materials behavior over the past decade. The Kohn–Sham approach to DFT reduces the many-body Schrodinger (eigen value) problem of interacting electrons into an equivalent problem of noninteracting electrons in an effective mean field that is governed by electron-density. Despite the reduced computational complexity of Kohn–Sham DFT, large-scale DFT calculations are still computationally very demanding with the resulting computational complexity scaling cubically with number of atoms in a given materials system. Numerical algorithms with reduced scaling behavior which are robust, computationally efficient and scalable on parallel computing architectures are always desirable to enable simulations at larger scales and on more complex systems. Following this line of thought, this study explores the use of tensor structured methods for ab-initio numerical solution of Kohn–Sham equations arising in DFT calculations. Earlier studies on tensor-structured methods have been quite successful in the accurate calculation of Hartree and the nonlocal exchange operators arising in the Hartree–Fock equations. A recent investigation of low-rank Tucker-type decomposition of the electron-density of large aluminum clusters (obtained from the finite-element discretization of orbital free DFT) shows the exponential decay of approximation error with respect to Tucker rank (number of tensor-basis functions in Tucker type representation). The results also indicate a smaller Tucker rank for the accurate representation of the electron density and is only weakly dependent on the system sizes studied. The promising success of tensor-structured techniques in resolving the electronic structure of material systems has enabled us to take a step further. In this study, we propose a systematic way of computing a globally adapted Tucker-type basis for solving the Kohn–Sham DFT problem by using a separable approximation of the Kohn–Sham Hamiltonian. Further, the resulting Kohn–Sham eigenvalue problem is projected into the aforementioned Tucker basis and is solved for ground-state energy using a self-consistent field iteration. The rank of the resulting Tucker representation and the computational complexity of the calculation are examined on representative benchmark examples involving metallic and insulating systems.
Strongly correlated systems, i.e., quantum materials for which the interactions between its constituents are strong, are good candidates for the development of applications based on quantum-mechanical principles, such as quantum computers. Two paradigmatic models of strongly correlated systems are heavy-fermionic systems and one-dimensional spin-12 systems, with and without quenched disorder. In the past decade, improvement in computational methods and a vast enhancement in computational power has made it possible to study these systems in a a non-perturbative manner. In this thesis we present state-of-the-art numerical methods to investigate the properties of strongly correlated systems, and we apply these methods to solve a couple of selected problems in quantum condensed matter theory. We start by revisiting the phase diagram of the Falicov-Kimball model on the square lattice which can be considered as a heavy-fermionic systems. This model describes an interplay between conduction electrons and heavy electrons and reveals several distinct metal-insulator phase transitions. Using a lattice Monte-Carlo method, we study the transport properties of the model. Our analysis describes the role of temperature and interaction strength on the metal-insulator phase transitions in the Falicov-Kimball model. The second part of the thesis investigate the spatial structure of the entanglement in ground and thermal statesof the transverse-field Ising chain. We use the logarithmic negativity as a measure for the entanglement between two disjoint blocks. We investigate how logarithmic negativity depends on the spatial separation between two blocks, which can be viewed as the entanglement analog of a spatial correlation function. We find sharp entanglement thresholds at a critical distance beyond which the logarithmic negativity vanishes exactly and thus the two blocks become unentangled. Our results hold even in the presence of long-ranged quantum correlations, i.e., at the system’s quantum critical point. Using Time-Evolving Block Decimation (TEBD), we explore this feature as a function of temperature and size of the two blocks. We present a simple model to describe our numerical observations. In the last part of this thesis, we introduce an order parameter for a many-body localized spin-glass (MBL-SG) phase. We show that many-body localized spin-glass order can also be detected from two-site reduced density matrices, which we use to construct an eigenstate spin-glass order parameter. We find that this eigenstate spin-glass order parameter captures spin-glass phases in random Ising chains, both in many-body eigenstates as well as in the nonequilibrium dynamics, from a local in time measurement. We discuss how our results can be used to observe MBL-SG order within current experiments in Rydberg atoms and trapped ion systems.
This dissertation discussed four low-dimensional systems: Hubbard ladder and its 2D extension, anisotropic Hubbard ladder, one-dimensional two-orbital t-J model, and Kondo model. All of them are of strongly correlated. Doped cuprates, as strongly correlated systems, have attracted a lot of attention in the condensed matter physics community, not just from the purely theoretical perspective, but also due to the novel applications beyond the conventional semiconductor paradigm. They display complicated phase diagram, defying the conventional rigid band theory, shaking our common sense and driving us to wrestle with many-body physics. With the aid of advanced experimental techniques such as ARPES, its various exotic electronic structure, such as waterfalls, hole pockets, Fermi arcs and kinks have been unveiled and remain open to interpretation. To attack such complicated problems, people usually build various models to mimic the CuO2 planes, which is the common feature of various cuprate compounds and is believed to be mainly responsible for their complicated properties, especially the high temperature superconductivity. In Chapter 3, we simulated the spectral properties of the 2- leg single-band Hubbard ladder and its 2-dimensional extension at and away from half-lling using the numerical tool: the combination of Cluster Perturbation Theory (CPT) with the time-dependent density matrix renormalization group method (tDMRG) as a solver. The main features of the spectrum can be described with a mean-eld dispersion, with kinks and pseudogap traced back to scattering between spin and charge degrees of freedom. As a bonus, we nd that the spectrum of hubbard ladder involves spin-polaron, the bound state of spinon and holon. Interacting one-dimensional electron systems generically behave dierent from higher dimensional systems in the sense that its low-energy excitations are described by Luttinger liquid theory as collective bosonic modes carrying spin and charge separately, the so-called spinons and holons, rather than the coherent quasi-particles in Fermi liquid theory. This phenomenon is known as spin-charge separation, an intrinsic property of 1D system. It can be thought of as a particular case of electron fractionalization. When multiple 1D chains get coupled, how the picture changes? In Chapter 4, we study the spectral function of the anisotropic 2-leg Hubbard ladder, one of the simplest multiple-chain systems. The spectrum can be understood as the scattering resultants of spinon and holons: As the inter-chain hopping is increased, the continuum in the bonding channel moves to higher energies and spinon and holon branches merge into a single coherent quasi-particle band. Simultaneously, the spectrum undergoes a crossover from a regime with two minima at incommensurate values of kx (a Mott insulator), to one with a single minimum at kx = (a band insulator). In addition, the spectrum contains a continuum of scattering states consisting of a triplon and a polaron, accompanied by the formation of bound states with higher spin 3 2 , ferromagnetic \spin bags" in which the hole can move freely. To analyze the formation of quasi-particle, we study the time-evolution of charge and spin degrees of freedom in real space after a hole is injected, which indicates that incoherent holons and spinons can emerge into polarons, that can propagate coherently, after a characterstic time . Multiorbital systems can involve Mott and Hund physics, and are rich in various phenomena, including orbital selective Mott transitions, spin-orbital separations, and pairing density wave due to the complex interplay between spin, charge and orbital degrees of freedom. Therefore, it can capture many unique features in real strongly correlated systems, such as iron pnictides and ruthenates, and thus attract a lot of investigations. In Chapter 5, we comprehensively study a one-dimensional two-orbital model at and below quarter lling, which realizes a number of unconventional phases, by means of DMRG and some analytical calculations. In particular, we nd that the system supports an extensive density wave in which excitons quasicondense with nite center-of-mass momentum. In this phase, excitons behave as hardcore bosons without charge order. In addition, excitons can pair to form biexcitons in a state that is close to a charge density wave instability. Finally, a genuine orbital-selective paired state (metallic plus spin-gapped superconductor) can be realized when pairing dominates over the interorbital repulsion. Kondo problem, as one of the most studied and best understood correlated systems, has been studied by various techniques, but the internal structure of its ground state has two deeply con icting pictures: At strong coupling limit, the system is essentially composed of a scattering center, which is a tightly bound singlet formed by the impurity and a localized electron at r0, and the remaining conduction electrons that are decoupled to the impurity and remain almost \free". At weak enough couplings, the singlet extends to the entire volume and the impurity will couple mostly to one electron at the Fermi level. In chapter 6, we provide a coherent picture to unveil the puzzle in the context of quantum information theory by deconstructing the Kondo singlet, both in real and energy space, and measuring the spin correlations between the impurity and the invididual free electron eigenstate based on two dierent measures. As a bonus, we can identify \projected natural orbitals" that can be used as a \good" approximate wavefunctions for simulations, and a quasi-order parameter that determines the crossover from weak to strong coupling regimes and furthermore oers the means to measure the Kondo screening length K. This screening length might be used to characterize the \size" of the Kondo cloud.