In all preceding chapters, we have tried to separate the effect of the light on the atoms from the reverse effect, the modification of the light by the atomic medium. In most cases this allows an explicit solution of the equations of motion and provides stable stationary states. In recent years, another approach to the interaction between light and matter has appeared, which emphasises strong coupling between the two. It uses the interactions as a tool to study general aspects of nonlinear dynamics. This chapter provides an introduction to this field, without trying to give a complete summary. Overview Resonant vapours as optically nonlinear media Mutual interactions So far, we have considered the effect of the laser on the atomic medium separately from the measurement of microscopic dynamics by the polarisation selective detection of transmitted light. In this approximation, the pump laser drives the atoms without suffering significant attenuation or polarisation changes. Conversely, the probe beam, which monitors the optical properties of the atomic medium, changes the microscopic state of the atoms only infinitesimally. This approach guarantees, e.g., that the response of the medium to the probe beam is linear. As stressed before, this assumption of one-sided interactions is always an approximation, since the conservation of energy and angular momentum make it impossible to change either of the two partial systems without compensating changes in the other part.
In all preceding chapters, we have tried to separate the effect of the light on the atoms from the reverse effect, the modification of the light by the atomic medium. In most cases this allows an explicit solution of the equations of motion and provides stable stationary states. In recent years, another approach to the interaction between light and matter has appeared, which emphasises strong coupling between the two. It uses the interactions as a tool to study general aspects of nonlinear dynamics. This chapter provides an introduction to this field, without trying to give a complete summary. Overview Resonant vapours as optically nonlinear media Mutual interactions So far, we have considered the effect of the laser on the atomic medium separately from the measurement of microscopic dynamics by the polarisation selective detection of transmitted light. In this approximation, the pump laser drives the atoms without suffering significant attenuation or polarisation changes. Conversely, the probe beam, which monitors the optical properties of the atomic medium, changes the microscopic state of the atoms only infinitesimally. This approach guarantees, e.g., that the response of the medium to the probe beam is linear. As stressed before, this assumption of one-sided interactions is always an approximation, since the conservation of energy and angular momentum make it impossible to change either of the two partial systems without compensating changes in the other part.
From a macroscopic viewpoint, atomic vapours appear homogeneous and isotropic. As we have seen during the discussion of the microscopic dynamics that light induces in atomic systems, however, the interaction with light as well as external fields can break the rotational and translational symmetries and make the system both inhomogeneous and anisotropic. This microscopic anisotropy appears directly in the optical properties of the system. This chapter discusses the propagation of light in such a medium and describes experiments that analyse the transmitted light to obtain information about the microscopic state of the medium. Isotropic atoms The Lorentz–Lorenz model Outline The interaction of electromagnetic radiation with matter, in particular light, has inspired philosophers of nature for many centuries and has led to heated debates like the one between Newton and Goethe. The original interest was with the difference in absorption of various materials as a function of the optical wavelength and with the refraction of light, i.e., its dispersion. The first theoretical analysis that connected these macroscopic effects to microscopic properties of the material was the Lorentz–Lorenz theory of dispersion (Lorentz 1880; Lorenz 1881), which was put forward shortly after the Maxwell equations and published in the year after Maxwell's death. (See Figure 6.1.) This theory models the material as a collection of dipoles, driven by the electromagnetic wave. We give here a brief summary of the theory, since its physical content is still the foundation of today's description although the mathematical formalism has changed significantly.
Summary form only given. The dynamics of a medium consisting of a dense collection of two-level atoms interacting via the electromagnetic field has been derived from first principles. In dense media and condensed matter, the microscopic local field that couples with a single atom is related to the macroscopic field and volume propagation by the Lorentz-Lorenz relation written for an isotropic homogeneous medium. The dynamical equations for the medium, coupled self-consistently with the Maxwell inhomogeneous wave equation, are given in the rotating wave and dipole coupling approximations. The microscopic development is used within the framework of full quantization, and the explicit effects of spontaneous relaxation for the host as well as the atoms are treated, together with corresponding fluctuations. Particular effects upon intrinsic adiabatic inversion, self-induced transparency, and lasing without inversion, are presented and discussed. In particular, the equilibrium, stationary, and dynamical effects of the host medium, and medium and field fluctuations upon local field effects are discussed.
After a theoretically investigating the occupation number and the polarizability of an ensemble of atomic or other microscopic particles, this chapter explores how these quantities are observed and used in experiments. Laser spectroscopy offers several nonlinear methods where light-matter interaction is effective for selected velocity classes only. The result is called 'Doppler-free' spectroscopy. Laser-induced fluorescence (LIF) allows linear mapping of selected properties of a sample such as particle density, damping rates and so on. Like fluorescence, linear absorption and dispersion of the driving laser field occurs at low saturation intensities only. Spectral lines are affected not only by pressure broadening but also by a pressure shift of the centre of mass of a line. Absorption and emission of light also changes the external mechanical state of motion of microscopic or atomic particles, Optical pumping processes are the origin of sub-Doppler laser cooling, and occur only in atoms with a complex magnetic fine structure.
Thus far, we have developed the properties of the electromagnetic field at optical frequencies, based on Maxwell’s equations. These equations further give a classical macroscopic perspective on the coupling of the propagation media to the field, as presented in Chapter 2. The macroscopic properties of a medium are based on averaged microscopic properties. The microscopic energy structure of matter was presented in Chapter 3, covering gases, solids, and liquids by employing mostly quantum models. We now proceed to the next level of development, the dynamic description of the interaction between the optical field and the propagation medium as a function of the field frequency and propagation media variables (e.g., energy structure, temperature, and pressure). In this chapter, the classical electromagnetic field is coupled to discrete frequency oscillators via Newton’s equation of motion. This approach leads to the popular classical oscillator model, often presented in introductory books on lasers. The classical oscillator model is an incomplete theory and can be only a semiempirical model. In the next chapter, a more detailed and comprehensive approach, which also includes statistical and quantum mechanics, is used leading to robust semiclassical and quantum oscillator models. This chapter and the next are the basis for the applied models presented in Part II of this book. Classical electrodynamics is based on Maxwell’s equations, as given in Chapter 2, and the Lorentz force relation, as given below: . . . F = q[E + (v × B)]. (4.1) . . . These equations cover the classical description of the interaction of light and matter. The first term in Eq. 4.1 represents coupling of the electric field to the medium. As discussed in Chapter 2 (Section 2.2), the leading mechanism for this is the electric dipole moment. To see that this is the coupling mechanism in the first term, consider the potential function driving this force, F = −∇V(r) = −∇(−qr · E). The above expression contains the dipole moment, as defined in Chapter 2. The second term in Eq. 4.1 represents coupling of the magnetic field to the medium.
A detectable nonlinear response between light and matter depends on one of two key ingredients: Either there is a resonance between the light wave and some natural oscillation mode of the material, or the light is sufficiently intense. In this chapter, the authors let the matter variables themselves play active roles and derive coupled nonlinear differential equations for the electric and matter fields. They outline the use of Schrodinger's equation to derive the Bloch equations, which describe the dynamics of the oscillators of matter and help to derive the Maxwell equation for the envelope of an almost monochromatic electromagnetic wave. The authors analyse the case of two distinct co- or counter-propagating waves interacting with a three-level medium where both waves excite separate quantum transitions sharing a common level. They also help to derive an effective two-level atom model that describes two-photon absorption and stimulated Raman scattering.
Two-dimensional spectroscopy is an extension of conventional spectroscopic methods that characterises resonant systems as a function of two frequency variables. We use this technique to improve on the characterisation of atomic media along the lines discussed in the preceding chapter. On a microscopic level, the most important physical process for two-dimensional spectroscopy is the transfer of coherence between different transitions. We introduce the basics of the technique and discuss a few specific examples to outline its potential. Fundamentals Motivation and principle Motivation The preceding chapter showed how light drives the internal dynamics of resonant atomic media and how the measurement of optical anisotropies allows us to monitor these dynamics. The experiments discussed in the preceding chapter, however, can provide only limited information about the system. Most physical systems have more degrees of freedom than we can observe by measurements on transmitted light. As another limitation, we have primarily considered atoms that evolve under their internal Hamiltonian, only weakly perturbed by the probe laser beam. The example of light-induced spin nutation showed that the dynamics of optically pumped atoms differ significantly from those of a free atom. Although it is possible to observe spin nutation for systems with more than two ground-state sublevels, such an experiment suffers from the damping that accompanies optical pumping. The damping drives the system rapidly to an equilibrium, too fast for detailed dynamical observations.