Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE International Symposium on Circuits and Systems proceedings

An efficient synthesis method for ternary reversible logic

Saikat Basu, Sudhindu Bikash Mandal, Amlan Chakrabarti, Susmita Sur‐Kolay, Avik Kumar Choudhury

Published May 1, 2016• 5 citations
Publisher

Abstract

While the role of ternary reversible and quantum computation has been growing, synthesis methodologies for such logic, have been addressed in only a few works. A reversible ternary logic function can be expressed as minterms by using projection operators. In this paper, a novel realization of the projection operators using a minimum number of permutative ternary Muthukrishnan-Stroud (M-S) gates is presented. Next, an efficient method for logic simplification for ternary reversible logic is proposed. This method along with the new construction of projection operators yields significantly lower gate cost of approximately 31% less than that obtained by earlier methodologies, for the synthesis of ternary benchmark circuits.

DOI
10.1109/iscas.2016.7539045

Related papers

Improved Ternary Reversible Logic Synthesis Using Group Theoretic Approach

P. Mercy Nesa Rani, Kamalika Datta

Quantum computation relies on exploiting quantum mechanical phenomena, and has received significant attention in recent years. Higher-dimensional quantum systems increase the density of encoded information per computing element (e.g., qutrit for three-level system), resulting in less resource overhead. For instance, 63% reduction in the number of qutrits is possible for ternary quantum systems as compared to the corresponding binary systems. The proposed work exploits this fact to synthesize ternary reversible circuits employing a cycle-based technique. The method starts from the ternary reversible specification of a given function in the form of a permutation. The permutation cycles are factored into simpler three-cycles and two-cycles, which are then mapped to ternary reversible gates. Different gate libraries are used to synthesize three-cycles and two-cycles, respectively. A gate decomposition approach is also proposed to synthesize a quantum gate netlist in terms of elementary ternary quantum gates, viz. Muthukrishnan–Stroud gate and shift gate. Synthesis results on benchmark functions indicate that the proposed method results in 27% and 6% improvements in quantum cost and gate count, respectively, over existing works in the literature.

Journal of Circuits Systems and Computers•Dec 23, 2019•7 citations

Synthesis Techniques for Ternary Quantum Logic

Sudhindu Bikash Mandal, Amlan Chakrabarti, Susmita Sur‐Kolay

Synthesis of ternary quantum circuits involves basic ternary gates and logic operations in the ternary quantum domain. Works that define ternary algebra and their applications for ternary quantum logic realization, are very few. In this paper, we express a ternary logic function in terms of projection operations including a new one. We demonstrate how to realize a few new multi-qutrit ternary gates in terms of generalized ternary gates and projection operations. We then employ our synthesis method to design ternary adder circuits which have better cost than that obtained by earlier method.

IEEE International Symposium on Multiple-Valued Logic (ISMVL)•May 1, 2011•26 citations

Quantum Ternary Circuit Synthesis Using Projection Operations

Sudhindu Bikash Mandal, Amlan Chakrabarti, Susmita Sur‐Kolay

Basic logic gates and their operations in ternary quantum domain are involved in the synthesis of ternary quantum circuits. Only a few works define ternary algebra for ternary quantum logic realization. In this paper, a ternary logic function is expressed in terms of projection operations including a new one. A method to realize new multi-qutrit ternary gates in terms of generalized ternary gates and projection operations is also presented. We also introduced ten simplification rules for reducing ancilla qutrits and gate levels. Our method yields lower gate cost and fewer gate levels and ancilla qutrits than that obtained by earlier methods for the ternary benchmark circuits. The $n$ qutrit ternary sum function is synthesized without any ancilla qutrit by our proposed methodology.

arXiv:1205.2390•May 9, 2012•4 citations

Genetic Synthesis of New Reversible/Quantum Ternary Comparator

V. G. Deĭbuk, Andrij V. Biloshytskyi

Methods of quantum/reversible logic synthesis are based on the use of the binary nature of quantum computing. However, multiple-valued logic is a promising choice for future quantum computer technology due to a number of advantages over binary circuits. In this paper we have developed a synthesis of ternary reversible circuits based on Muthukrishnan-Stroud gates using a genetic algorithm. The method of coding chromosome is presented, and well-grounded choice of algorithm parameters allowed obtaining better circuit schemes of one- and n-qutrit ternary comparators compared with other methods. These parameters are quantum cost of received reversible devices, delay time and number of constant input (ancilla) lines. Proposed implementation of the genetic algorithm has led to reducing of the device delay time and the number of ancilla qutrits to 1 and 2n-1 for one- and n-qutrits full comparators, respectively. For designing of n-qutrit comparator we have introduced a complementary device which compares output functions of 1-qutrit comparators.

Advances in Electrical and Computer Engineering•Jan 1, 2015•12 citations

An Improved Ternary Logic Synthesis Approach Using Ternary Max-Min Algebra

P. Mercy Nesa Rani, Leniency Marbaniang, Majid Haghparast +1 more

Abstract Quantum computation which relies on exploiting quantum mechanical phenomena, has received significant attention in recent years. Higher dimensional quantum systems increase the density of encoded information per computing element (e.g. qutrit for the 3-level system), resulting in less resource overhead. Recently, there have been several works in the synthesis of ternary reversible functions, most of which are not scalable. Therefore, this study proposes a scalable approach for the synthesis of ternary logic functions using Max-Min algebra. In this approach, from a ternary truth table, Max-Min expressions are first generated with the help of ternary Max-Min algebra. Then, the expressions are minimized using Boolean simplification rules. After that, the minimized expressions are mapped to ternary reversible gates. We have also proposed a decomposition structure to map the ternary reversible gates into ternary elementary gates. Experimental evaluation shows that the proposed synthesis approach is more scalable as compared to existing synthesis approaches. Keywords: Ternary reversible circuit, quantum computing, qutrit, reversible literals, non-reversible literals Cite this Article P. Mercy Nesa Rani, Leniency Marbaniang, Majid Haghparast, Kamalika Datta. An Improved Ternary Logic Synthesis Approach Using Ternary Max-Min Algebra. Journal of Advanced Database Management & Systems. 2019; 6(2): 40–47p.

Journal of Advanced Database Management & Systems•Jul 6, 2019•0 citations

A Novel Design of a Multiplier Using Reversible Ternary Gates

Mohammad Mehdi Panahi, Omid Hashemipour, Keivan Navi

Reversible ternary circuit design is now being taken into consideration for its application within the quantum computer and other technologies associated with the nanotechnology domain, in addition to the advantages of the ternary logic application as opposed to binary logic. Multiplier circuit is one of the most important computing circuit in the ALU. Therefore, the circuit optimization for the multiplication will lead to efficient processor. In this paper, the reversible circuit for multiplication of two unsigned two-digit ternary numbers has been proposed. To construct reversible ternary multiplier, a new component termed TPPG with the quantum cost of 13 for partial product generation was proposed. In addition, we have introduced four new blocks of reversible ternary adder with the quantum cost of 11, 10, 7, 5 and one constant input, which can be used in the proposed multiplier circuit. We attempted to optimize the design of the circuits in terms of quantum cost, a number of primitive gates, constant inputs, and garbage outputs as far as possible. To realize all proposed circuits, one-qutrit shift gates and two-qutrit Muthukrishnan-Stroud gates were used.

IETE Journal of Research•Jan 30, 2019•21 citations
While the role of ternary reversible and quantum computation has been growing, synthesis methodologies for such logic, have been addressed in only a few works. A reversible ternary logic function can be expressed as minterms by using projection operators. In this paper, a novel realization of the projection operators using a minimum number of permutative ternary Muthukrishnan-Stroud (M-S) gates is presented. Next, an efficient method for logic simplification for ternary reversible logic is proposed. This method along with the new construction of projection operators yields significantly lower gate cost of approximately 31% less than that obtained by earlier methodologies, for the synthesis of ternary benchmark circuits.
Quantum computation relies on exploiting quantum mechanical phenomena, and has received significant attention in recent years. Higher-dimensional quantum systems increase the density of encoded information per computing element (e.g., qutrit for three-level system), resulting in less resource overhead. For instance, 63% reduction in the number of qutrits is possible for ternary quantum systems as compared to the corresponding binary systems. The proposed work exploits this fact to synthesize ternary reversible circuits employing a cycle-based technique. The method starts from the ternary reversible specification of a given function in the form of a permutation. The permutation cycles are factored into simpler three-cycles and two-cycles, which are then mapped to ternary reversible gates. Different gate libraries are used to synthesize three-cycles and two-cycles, respectively. A gate decomposition approach is also proposed to synthesize a quantum gate netlist in terms of elementary ternary quantum gates, viz. Muthukrishnan–Stroud gate and shift gate. Synthesis results on benchmark functions indicate that the proposed method results in 27% and 6% improvements in quantum cost and gate count, respectively, over existing works in the literature.
Synthesis of ternary quantum circuits involves basic ternary gates and logic operations in the ternary quantum domain. Works that define ternary algebra and their applications for ternary quantum logic realization, are very few. In this paper, we express a ternary logic function in terms of projection operations including a new one. We demonstrate how to realize a few new multi-qutrit ternary gates in terms of generalized ternary gates and projection operations. We then employ our synthesis method to design ternary adder circuits which have better cost than that obtained by earlier method.
Basic logic gates and their operations in ternary quantum domain are involved in the synthesis of ternary quantum circuits. Only a few works define ternary algebra for ternary quantum logic realization. In this paper, a ternary logic function is expressed in terms of projection operations including a new one. A method to realize new multi-qutrit ternary gates in terms of generalized ternary gates and projection operations is also presented. We also introduced ten simplification rules for reducing ancilla qutrits and gate levels. Our method yields lower gate cost and fewer gate levels and ancilla qutrits than that obtained by earlier methods for the ternary benchmark circuits. The nnn qutrit ternary sum function is synthesized without any ancilla qutrit by our proposed methodology.
Methods of quantum/reversible logic synthesis are based on the use of the binary nature of quantum computing. However, multiple-valued logic is a promising choice for future quantum computer technology due to a number of advantages over binary circuits. In this paper we have developed a synthesis of ternary reversible circuits based on Muthukrishnan-Stroud gates using a genetic algorithm. The method of coding chromosome is presented, and well-grounded choice of algorithm parameters allowed obtaining better circuit schemes of one- and n-qutrit ternary comparators compared with other methods. These parameters are quantum cost of received reversible devices, delay time and number of constant input (ancilla) lines. Proposed implementation of the genetic algorithm has led to reducing of the device delay time and the number of ancilla qutrits to 1 and 2n-1 for one- and n-qutrits full comparators, respectively. For designing of n-qutrit comparator we have introduced a complementary device which compares output functions of 1-qutrit comparators.
Abstract Quantum computation which relies on exploiting quantum mechanical phenomena, has received significant attention in recent years. Higher dimensional quantum systems increase the density of encoded information per computing element (e.g. qutrit for the 3-level system), resulting in less resource overhead. Recently, there have been several works in the synthesis of ternary reversible functions, most of which are not scalable. Therefore, this study proposes a scalable approach for the synthesis of ternary logic functions using Max-Min algebra. In this approach, from a ternary truth table, Max-Min expressions are first generated with the help of ternary Max-Min algebra. Then, the expressions are minimized using Boolean simplification rules. After that, the minimized expressions are mapped to ternary reversible gates. We have also proposed a decomposition structure to map the ternary reversible gates into ternary elementary gates. Experimental evaluation shows that the proposed synthesis approach is more scalable as compared to existing synthesis approaches. Keywords: Ternary reversible circuit, quantum computing, qutrit, reversible literals, non-reversible literals Cite this Article P. Mercy Nesa Rani, Leniency Marbaniang, Majid Haghparast, Kamalika Datta. An Improved Ternary Logic Synthesis Approach Using Ternary Max-Min Algebra. Journal of Advanced Database Management & Systems. 2019; 6(2): 40–47p.
Reversible ternary circuit design is now being taken into consideration for its application within the quantum computer and other technologies associated with the nanotechnology domain, in addition to the advantages of the ternary logic application as opposed to binary logic. Multiplier circuit is one of the most important computing circuit in the ALU. Therefore, the circuit optimization for the multiplication will lead to efficient processor. In this paper, the reversible circuit for multiplication of two unsigned two-digit ternary numbers has been proposed. To construct reversible ternary multiplier, a new component termed TPPG with the quantum cost of 13 for partial product generation was proposed. In addition, we have introduced four new blocks of reversible ternary adder with the quantum cost of 11, 10, 7, 5 and one constant input, which can be used in the proposed multiplier circuit. We attempted to optimize the design of the circuits in terms of quantum cost, a number of primitive gates, constant inputs, and garbage outputs as far as possible. To realize all proposed circuits, one-qutrit shift gates and two-qutrit Muthukrishnan-Stroud gates were used.