Historically, the scientific exploration of new phenomena has often been guided by systematic studies of observations, i.e., experimentally verifiable facts, which can be used as the basis to construct the underlying physical laws. As the apex of the investigations, one tries to identify the minimal set of fundamental assumptions – referred to as the axioms – needed to describe correctly the experimental observations. Even though the axioms form the basis to predict the system's behavior completely, they themselves have no rigorous derivation or interpretation. Thus, the axioms must be viewed as the elementary postulates that allow us to formulate a systematic description of the studied system based on well-defined logical reasoning. Even though it might seem unsatisfactory that axioms cannot be “derived,” one has to acknowledge the paramount power of well-postulated axioms to predict even the most exotic effects. As is well known, the theory of classical mechanics can be constructed using only the three Newtonian axioms. On this basis, an infinite variety of phenomena can be explained, ranging from the cyclic planetary motion all the way to the classical chaos.
Historically, the scientific exploration of new phenomena has often been guided by systematic studies of observations, i.e., experimentally verifiable facts, which can be used as the basis to construct the underlying physical laws. As the apex of the investigations, one tries to identify the minimal set of fundamental assumptions – referred to as the axioms – needed to describe correctly the experimental observations. Even though the axioms form the basis to predict the system's behavior completely, they themselves have no rigorous derivation or interpretation. Thus, the axioms must be viewed as the elementary postulates that allow us to formulate a systematic description of the studied system based on well-defined logical reasoning. Even though it might seem unsatisfactory that axioms cannot be “derived,” one has to acknowledge the paramount power of well-postulated axioms to predict even the most exotic effects. As is well known, the theory of classical mechanics can be constructed using only the three Newtonian axioms. On this basis, an infinite variety of phenomena can be explained, ranging from the cyclic planetary motion all the way to the classical chaos.
The behavior of classical macroscopic particles – from baseballs to planets – is governed by Newtonian mechanics as we have described in the first chapters of this book. The behavior of very small particles, on the other hand, is governed by an entirely different collection of equations and rules that go under the name of “quantum mechanics” and these particles are referred to as quantum particles. These rules have analogies to classical mechanics, but are fundamentally different and somewhat mysterious as we discussed in Chapter 8. The fundamental principles of quantum mechanics cannot be proven to be correct. They were developed based on the results of experimental observation, by analogy with classical mechanics, and through the consideration of logical implications of the formalisms used. There is no way to derive the fundamental elements of quantum mechanics, any more than one could predict from first principles that Newtonian forces should add as vectors. On the other hand, quantum mechanics is among the most rigorously tested theories in science, and the predictions of quantum mechanics have, so far, always been in agreement with experiment. In this chapter, we will present quantum mechanics as a series of postulates and examine their implications in application to simple one-dimensional systems. In the next chapter we will examine quantum effects in real systems including atoms, molecules, crystals, and artificially engineered nano-structures.
Classical mechanics and electromagnetismThe mechanics of motion formulated by Newton and contemporaries in the 17th century is the foundation of contemporary physics.It is immensely successful, explaining and quantifying a vast array of phenomena, ranging from planetary motion to the flow of fluids.By the latter part of the 19th century the study of electric and magnetic fields and their inclusion in the framework of Newtonian physics appeared near completion.Since motion and electromagnetism are central to the failures of Newtonian physics in the atomic realm, it is useful to review the essential ideas, concepts, and the implicit assumptions of what is now referred to as classical physics.Many of the results presented in this chapter are assumed to be familiar to the reader, but some concepts are more thoroughly presented because of their relevance to quantum mechanics. Newtonian mechanicsFor simplicity initial consideration is limited to a single point particle of inertial mass m.A point particle is treated as infinitesimally small and indivisible.It is possible to formulate Newtonian mechanics in terms of continuous matter distributions, referred to as continuum mechanics, but these will not be considered in this text.In that regard, point particles are often used as an approximation to the constituents of real matter in Newtonian mechanics.A point particle's position therefore coincides with a point in space at every given moment of time, parameterized with t, and can be described mathematically by a vector x from the choice of origin to that point.As the point particle moves its position is given by the time-dependent trajectory x t ( ).An important assumption of Newtonian mechanics is that all observers are equipped with identical meter sticks and synchronized clocks, and they all agree upon the current position at the time t, although the choice of each observer's origin is arbitrary.The Cartesian components of the vector trajectory are denoted x t ( ) i , where the subscript i runs over the dimensions of the space under consideration.In one dimension the subscript is
Basic scientific theories usually start with a set of hypotheses or “postulates.” There is generally no logical reason, apart from internal consistency, that can be given to justify such postulates absolutely. They come from ‘revelations’ in the minds of ‘geniuses,’ most likely with hints from Nature based on extensive careful observations. Their general validity can only be established through experimental verification. If numerous rigorously derived logical consequences of a very small set of postulates all agree with experimental observations without exception, one is inclined to accept these postulates as correct descriptions of the laws of Nature and use them confidently to explain and predict other natural phenomena. Quantum mechanics is no exception. It is based on a few postulates. For the purpose of the present discussion, we begin with three basic postulates involving: the “state functions,” “operators,” and “equations of motion.”
Newtonian mechanics or classical mechanics in its simplest form, known as the laws of mechanics is written in terms of particle trajectories. The trajectory underlies the structure of classical physics and the particle underlies the model of physical reality. Newtonian mechanics has taken such strong roots and everybody believed that everything in this universe can be explained on the basis of these laws. In 1897, the British Physicist J. J. Thompson demonstrated that the beam that leaves the cathode, the so-called cathode rays, consists of a beam of negatively charged discrete particles. Wien equation gives excellent agreement with experiment in the region of short wavelengths and the Rayleigh-Jeans equation appears to be asymptotically correct at long wavelengths. In 1887, Hertz observed photoelectric effect and the first outstanding application of quantum theory was in its explanation by Albert Einstein in 1905.
During the past two or three centuries western philosophy and science have confirmed each other in their ontological attitude towards external reality. The particular opinion that physical objects have an existence completely independent of observation was established as the necessary basis for all scientific investigation. The discovery in quantum physics that the phenomena ultimately constituting the stability of the material world cannot be separated from the instruments of observation was necessarily felt disastrous to the scientific world-picture, and many philosophers and scientists, including celebrated physicists, are still trying by all means to save ontology in quantum physics. The motive power behind this activity is the belief that the objectivity of science can be maintained only if the elementary particles of matter can be objectified in the usual way. The present chapter deals with the fundamental conditions in quantum physics which entail a complete breakdown of the conceptual frame of classical mechanics
The aim of this chapter is to present some very basic principles of classical mechanics. They can help us understand the novelty of quantum theory. Classical mechanics was founded by Newton and contemporary 17th-century natural philosophers, and further developed in the 18th and 19th centuries by many physicists and mathematicians, as a result of the search for a rational, causal, and scientific explanation of the universe. In classical mechanics, real-world objects are modeled as a collection of point particles, i.e., objects with negligible size. The motion of a point particle is characterized by a small number of parameters such as its position, mass, velocity, and the forces applied to it. The position of a point particle is defined with respect to an arbitrary fixed reference point in the three- dimensional Euclidean space, which is usually chosen as the origin of some coordinate system. The velocity of a point particle is the rate of change of its position with time. The force applied to a point particle (called the external force) is the cause for the point particle x y z A to undergo a certain change in its velocity, i.e., an acceleration (Newton’s second law of motion). For the sake of simplicity, here we shall refer to a point particle or a collection of point particles simply as an object. Newton’s first law of motion states that if an object experiences no net external force, then its velocity is constant, i.e., the object is either at rest or it moves in a straight line with a constant speed. The first law of motion postulates the existence of a certain set of frames of reference called inertial reference frames, relative to which the motion of an object not subject to external forces is a straight line at a constant speed. For this reason, Newton’s first law is also referred to as the law of inertia.