Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Flux and profile measurements of an atomic beam using laser cooled atoms

Thomas Prescott

Published Jan 1, 2016• 0 citations
Publisher

Abstract

The population dynamics of a Magneto-Optical Trap (MOT) make it a potential candidate for flux measurements of an atomic beam. This is achieved by determining the collisional cross section of the trapped atom and the beam particle which would result in ejection of a trapped atom. Due to the properties of a MOT it is possible to make spatial and time-of-flight profiles of the beam using this technique. The work of this thesis explores the collisional cross sections and flux profiles of several gaseous beams with a MOT of ⁸⁵Rb or ⁸⁷Rb. Each of the beams, generated through supersonic expansion, produced a loss cross section on the order of the combined van-der-Waals radii of the two particles. The flux and time-of-flight information of the beam was verified with a Residual Gas Analyser (RGA) and high beam rep rate pressure measurements. The MOT was characterized through a combination of fluorescence detection for population and a catalysis process for the trap's depth. A custom built translation mechanism for the MOT's optics and Helmholtz coils was constructed to perform the profiling measurements.

DOI
10.14288/1.0223697

Related papers

Laser Cooling and Trapping of Metastable Neon and Applications to Photoionization

J. P. Ashmore

This thesis presents an in-depth study into the characterization and enhancement of a metastable neon laser cooled and trapped atomic beam. The apparatus consists of a standard Zeeman slowed atomic beam loaded into a magneto-optical trap and was designed for applications to electron scattering experiments and photoionization. The efficiency of the metastable neon atomic source was investigated to determine the ideal cathode type for maximum metastable production and optimal atomic beam velocity haracteristics. A series of characterization measurements were performed on the MOT, and the trap volume and population were investigated for a range of trapping and slowing laser intensities and detunings, together with the MOT and Zeeman slower magnetic fields. The volume measurements were compared to standard Doppler theory and it was found that the Doppler model inadequately explained the trap behaviour. It was found that the MOT population characteristics were governed by two processes: two-body losses that limit the trap population at high densities, and the efficiency of the atom capture process which limits the operational range of the MOT over the various parameters. The trap temperature was determined to be 1.3mK via a time-of-flight technique. This was nearly twice that predicted by Doppler theory and the lack of agreement once again suggests the inadequacies in the Doppler theory to correctly model the experiment. The application of the MOT to the photoionization cross-section measurement of the (2p53p)3D3 state of neon was investigated. The MOT decay technique was utilized to measure cross-section values of o351 = 2.9+0.2 -0.3 x 10 -18cm2 and o363 = 3.1 +0.3 -0.4 x 10-18cm2 at the wavelengths of 351nm and 363nm respectively. This is an increase in accuracy of around a factor of five from previous measurements and it was found that the results agreed well with the values predicted by current theories.

•Jan 1, 2005•2 citations

Study of background gas collisions in atomic traps

Janelle Van Dongen

This thesis describes an investigation and application of the loss of laser cooled atoms from a trap induced by background collisions. The loss rate constant depends on the density of background gas and the velocity averaged collisional loss cross section due to collisions. The velocity averaged collisional loss cross section can be calculated and its dependence on trap depth was verified using a magneto-optical trap. This verification involved measurements of the loss rate constant for a quadrupole magnetic and a magneto-optical trap and measurement of the density of Ar background gas using a residual gas analyzer. The second part of the thesis focuses on an application of these measurements of the loss rate constant to measure the pressure of the background gas. The experimental progress to date on the atom pressure sensor is provided.

•Jan 1, 2014•3 citations

Study of Collision Cross Section of Ultra-Cold Rubidium using a Magneto-Optic and pure Magnetic trap

David E. Fagnan

This thesis discusses a new technique for measuring collision cross sections, using a magnetooptical trap (MOT) or magnetic trap as well as theoretical predictions for the resulting measurements based on scattering theory. The initial discussion focuses on a theoretical overview of the principles involved in laser cooling and trapping, magnetic trapping, and scattering theory. Following this, a detailed overview of the experimental instruments and methods describing the vacuum system, laser light, magnetic coils, imaging and control systems will be presented. In addition to an experimental overview, the methods and mechanical formulation involved in predicting cross sections and loss rates based on scattering theory are discussed. Finally, an overview of both experimental and theoretical results including cross sections and loss rates for the case of trapped 87Rb and background argon or helium gas will be given. The results gathered in this thesis show a strong dependence of elastic collision cross section on trap depth, which indicates that the majority of elastic collisions between ultra-cold rubidium and room temperature argon impart energy below 1K. These results suggest that the magnetic trap may be a better tool for measuring total elastic collision cross sections.

•Jan 1, 2009•0 citations

Development of a magneto optical trap for Rubidium 87

Huzifa Mohammed Ahamed Mohammed Elnour

ENGLISH ABSTRACT: A Magneto Optical Trap (MOT) is a configuration formed by three orthogonal pairs of counterpropagating circularly polarized laser beams and a magnetic field gradient. A MOT is used to cool, capture and trap large numbers of atoms in vacuum at very low temperature in K range. In this thesis the development of an experimental setup for realising a MOT of 87Rb atoms is presented. The atomic structure of Rb and the theoretical background of laser cooling and magneto optical trapping was reviewed. The influence of rubidium background pressure in the vacuum system, the laser beam size and the power and frequency on the number of the trapped atoms were studied in literature. The trapping and repumping lasers were characterised experimentally. Six circularly polarised trapping beams with equal power were formed and properly aligned to intersect at the center of the trapping cell. Two optical setups were designed and exploited to investigate and optimise the trapping beam polarisation. The repumping laser beam was successfully aligned and colinearly combined into all the trapping beams. Three different experimental setups for saturated absorption spectroscopy were developed. Saturated absorption spectra showing the hyperfine structure of both 85Rb and 87Rb isotopes were measured and are discussed. Using two saturated absorption spectroscopy setups, the frequencies of both lasers were successfully locked to the trapping and repumping transitions of 87Rb respectively. A rectangular trapping cell was designed and attached to the vacuum system. A pressure of about 10­¯7 mbar was achieved. The magnetic field coils were characterised and affixed on both sides of the cell in an anti-Helmholtz configuration. Setups for imaging and quantification of the 87Rb atoms in the MOT were designed. Finally, the procedures for demonstrating a MOT are presented. In conclusion, the current status of the project is reported, with recommendations for the future work.

•Dec 1, 2013•0 citations

Optimization of Transfer of Cold Atoms From TwoDimensional Magneto Optical Trap to ThreeDimensional Magneto Optical Trap

Tirumalasetty Panduranga Mahesh, Nobuyuki Takei Supervisors Dr. Kenji Ohmori, Ayan Banerjee

This thesis reports on the generation of MOT for laser cooling and trapping of Rubidium 87 atoms. Probe-pump technique have been used in Rb gas cell and doppler free absorption peaks has been observed. Peak at the crossover frequency will be locked for laser cooling and repump beams. This locked freuqency used in MOT to trap Rb atoms. The technique of optical molasses is used to cool the atoms and quadrupole magnetic field applied to confine or trap atoms at the center of MOT. Two chambers are constructed for 2D and 3D MOT with different pressure. Rb atoms loaded efficiently from the high flux cold atom beam generated in a compact 2D MOT. This is the first step of Bose Einstein Condensate (BEC). A performance of 2D MOT was tested by another main chamber of 3D MOT contains 3 pairs of counter-propagating beams. Over 5x10⁶ atoms trapped in a 3D MOT with loading rate of 1:8x10⁶ atoms/sec. This experiment provided an excellent starting point for future experiment on Rydberg atoms in dense ultracold quantum gases.

•Apr 1, 2018•0 citations

Tightly confined atoms in optical dipole traps

Matthias C. Schulz

This thesis reports on the design, setup, and operation of a new atom trap apparatus, which is developed to confine few rubidium atoms in ultrahigh vacuum by means of taylored and dynamically variable light potentials (dipole traps), thus making the atoms available for spectroscopy and controlled manipulations. To maintain low background pressure, atoms of a vapour cell are transferred into a cold atomic beam by laser cooling techniques, and accumulated by a magneto-optic trap (MOT) in a separate part of the vacuum system. The laser cooled atoms are then transferred into dipole traps made of focused far-off-resonant laser fields in single or crossed-beam geometry, which are superimposed with the center of the MOT. Gaussian as well as hollow Laguerre-Gaussian (LG01) beam profiles are used with red-detuned and blue-detuned light. Microfabricated dielectric phase objects allow the efficient and robust mode conversion of Gaussian into Laguerre-Gaussian laser beams. Trap geometries can easily be changed due to the highly flexible experimental setup. The dipole trap laser beams have powers up to several hundred milliwatts and are focused to around 10 m. At a detuning of several tens of nanometers from the atomic resonance, the resulting traps are a few millikelvin deep, and the trapped atoms exhibit motional frequencies near 30 kHz, trap light scattering rates of a few hundred photons per second per atom, and storage times of several seconds. The number of dipole-trapped atoms ranges from more than ten thousand to below ten. The dipole-trapped atoms are detected either by a photon counting system with efficient straylight discrimination, or by recapture into the MOT, which is imaged onto a sensitive photodiode and a CCD-camera. Due to the strong AC-Stark shift imposed by the high-intensity trapping light, energy-selective resonant excitation and detection of the stored atoms is possible. The measured energy distribution is consistent with a harmonic potential shape and allows for the determination of temperatures and heating rates. From initial measurements, the thermal energy is found to be about 10 % of the trap depth. Using a crossed-beam geometry with red-detuned laser light, efficient transfer of atoms between the beams is observed. Optimum transfer occurs when the two beams cross at a radial offset, which can qualitatively be understood when the particle energy and geometrical properties of the two-beam trapping potential are considered. Numerical simulations reproduce the general features of the measured transfer efficiency vs. radial beam offset. This experiment is a first step towards dynamically variable potentials. Atoms have been radially confined in a blue-detuned hollow beam, and their decay time has been determined. This configuration is currently extended to a three-dimensionally confining blue-detuned dipole trap. For advanced laser cooling, state manipulation and spectroscopy of trapped atoms, a system of two diode lasers has been set up which are phase-coherently locked with a difference frequency near 6.834 GHz, to drive Raman transitions between the hyperfine-split ground states of 87Rb atoms. Resonances of such a transition have been recorded in a buffer gas loaded rubidium vapour cell with linewidths below 100 Hz.

•Jan 1, 2002•7 citations
The population dynamics of a Magneto-Optical Trap (MOT) make it a potential candidate for flux measurements of an atomic beam. This is achieved by determining the collisional cross section of the trapped atom and the beam particle which would result in ejection of a trapped atom. Due to the properties of a MOT it is possible to make spatial and time-of-flight profiles of the beam using this technique. The work of this thesis explores the collisional cross sections and flux profiles of several gaseous beams with a MOT of ⁸⁵Rb or ⁸⁷Rb. Each of the beams, generated through supersonic expansion, produced a loss cross section on the order of the combined van-der-Waals radii of the two particles. The flux and time-of-flight information of the beam was verified with a Residual Gas Analyser (RGA) and high beam rep rate pressure measurements. The MOT was characterized through a combination of fluorescence detection for population and a catalysis process for the trap's depth. A custom built translation mechanism for the MOT's optics and Helmholtz coils was constructed to perform the profiling measurements.
This thesis presents an in-depth study into the characterization and enhancement of a metastable neon laser cooled and trapped atomic beam. The apparatus consists of a standard Zeeman slowed atomic beam loaded into a magneto-optical trap and was designed for applications to electron scattering experiments and photoionization. The efficiency of the metastable neon atomic source was investigated to determine the ideal cathode type for maximum metastable production and optimal atomic beam velocity haracteristics. A series of characterization measurements were performed on the MOT, and the trap volume and population were investigated for a range of trapping and slowing laser intensities and detunings, together with the MOT and Zeeman slower magnetic fields. The volume measurements were compared to standard Doppler theory and it was found that the Doppler model inadequately explained the trap behaviour. It was found that the MOT population characteristics were governed by two processes: two-body losses that limit the trap population at high densities, and the efficiency of the atom capture process which limits the operational range of the MOT over the various parameters. The trap temperature was determined to be 1.3mK via a time-of-flight technique. This was nearly twice that predicted by Doppler theory and the lack of agreement once again suggests the inadequacies in the Doppler theory to correctly model the experiment. The application of the MOT to the photoionization cross-section measurement of the (2p53p)3D3 state of neon was investigated. The MOT decay technique was utilized to measure cross-section values of o351 = 2.9+0.2 -0.3 x 10 -18cm2 and o363 = 3.1 +0.3 -0.4 x 10-18cm2 at the wavelengths of 351nm and 363nm respectively. This is an increase in accuracy of around a factor of five from previous measurements and it was found that the results agreed well with the values predicted by current theories.
This thesis describes an investigation and application of the loss of laser cooled atoms from a trap induced by background collisions. The loss rate constant depends on the density of background gas and the velocity averaged collisional loss cross section due to collisions. The velocity averaged collisional loss cross section can be calculated and its dependence on trap depth was verified using a magneto-optical trap. This verification involved measurements of the loss rate constant for a quadrupole magnetic and a magneto-optical trap and measurement of the density of Ar background gas using a residual gas analyzer. The second part of the thesis focuses on an application of these measurements of the loss rate constant to measure the pressure of the background gas. The experimental progress to date on the atom pressure sensor is provided.
This thesis discusses a new technique for measuring collision cross sections, using a magnetooptical trap (MOT) or magnetic trap as well as theoretical predictions for the resulting measurements based on scattering theory. The initial discussion focuses on a theoretical overview of the principles involved in laser cooling and trapping, magnetic trapping, and scattering theory. Following this, a detailed overview of the experimental instruments and methods describing the vacuum system, laser light, magnetic coils, imaging and control systems will be presented. In addition to an experimental overview, the methods and mechanical formulation involved in predicting cross sections and loss rates based on scattering theory are discussed. Finally, an overview of both experimental and theoretical results including cross sections and loss rates for the case of trapped 87Rb and background argon or helium gas will be given. The results gathered in this thesis show a strong dependence of elastic collision cross section on trap depth, which indicates that the majority of elastic collisions between ultra-cold rubidium and room temperature argon impart energy below 1K. These results suggest that the magnetic trap may be a better tool for measuring total elastic collision cross sections.
ENGLISH ABSTRACT: A Magneto Optical Trap (MOT) is a configuration formed by three orthogonal pairs of counterpropagating circularly polarized laser beams and a magnetic field gradient. A MOT is used to cool, capture and trap large numbers of atoms in vacuum at very low temperature in K range. In this thesis the development of an experimental setup for realising a MOT of 87Rb atoms is presented. The atomic structure of Rb and the theoretical background of laser cooling and magneto optical trapping was reviewed. The influence of rubidium background pressure in the vacuum system, the laser beam size and the power and frequency on the number of the trapped atoms were studied in literature. The trapping and repumping lasers were characterised experimentally. Six circularly polarised trapping beams with equal power were formed and properly aligned to intersect at the center of the trapping cell. Two optical setups were designed and exploited to investigate and optimise the trapping beam polarisation. The repumping laser beam was successfully aligned and colinearly combined into all the trapping beams. Three different experimental setups for saturated absorption spectroscopy were developed. Saturated absorption spectra showing the hyperfine structure of both 85Rb and 87Rb isotopes were measured and are discussed. Using two saturated absorption spectroscopy setups, the frequencies of both lasers were successfully locked to the trapping and repumping transitions of 87Rb respectively. A rectangular trapping cell was designed and attached to the vacuum system. A pressure of about 10­¯7 mbar was achieved. The magnetic field coils were characterised and affixed on both sides of the cell in an anti-Helmholtz configuration. Setups for imaging and quantification of the 87Rb atoms in the MOT were designed. Finally, the procedures for demonstrating a MOT are presented. In conclusion, the current status of the project is reported, with recommendations for the future work.
This thesis reports on the generation of MOT for laser cooling and trapping of Rubidium 87 atoms. Probe-pump technique have been used in Rb gas cell and doppler free absorption peaks has been observed. Peak at the crossover frequency will be locked for laser cooling and repump beams. This locked freuqency used in MOT to trap Rb atoms. The technique of optical molasses is used to cool the atoms and quadrupole magnetic field applied to confine or trap atoms at the center of MOT. Two chambers are constructed for 2D and 3D MOT with different pressure. Rb atoms loaded efficiently from the high flux cold atom beam generated in a compact 2D MOT. This is the first step of Bose Einstein Condensate (BEC). A performance of 2D MOT was tested by another main chamber of 3D MOT contains 3 pairs of counter-propagating beams. Over 5x10⁶ atoms trapped in a 3D MOT with loading rate of 1:8x10⁶ atoms/sec. This experiment provided an excellent starting point for future experiment on Rydberg atoms in dense ultracold quantum gases.
This thesis reports on the design, setup, and operation of a new atom trap apparatus, which is developed to confine few rubidium atoms in ultrahigh vacuum by means of taylored and dynamically variable light potentials (dipole traps), thus making the atoms available for spectroscopy and controlled manipulations. To maintain low background pressure, atoms of a vapour cell are transferred into a cold atomic beam by laser cooling techniques, and accumulated by a magneto-optic trap (MOT) in a separate part of the vacuum system. The laser cooled atoms are then transferred into dipole traps made of focused far-off-resonant laser fields in single or crossed-beam geometry, which are superimposed with the center of the MOT. Gaussian as well as hollow Laguerre-Gaussian (LG01) beam profiles are used with red-detuned and blue-detuned light. Microfabricated dielectric phase objects allow the efficient and robust mode conversion of Gaussian into Laguerre-Gaussian laser beams. Trap geometries can easily be changed due to the highly flexible experimental setup. The dipole trap laser beams have powers up to several hundred milliwatts and are focused to around 10 m. At a detuning of several tens of nanometers from the atomic resonance, the resulting traps are a few millikelvin deep, and the trapped atoms exhibit motional frequencies near 30 kHz, trap light scattering rates of a few hundred photons per second per atom, and storage times of several seconds. The number of dipole-trapped atoms ranges from more than ten thousand to below ten. The dipole-trapped atoms are detected either by a photon counting system with efficient straylight discrimination, or by recapture into the MOT, which is imaged onto a sensitive photodiode and a CCD-camera. Due to the strong AC-Stark shift imposed by the high-intensity trapping light, energy-selective resonant excitation and detection of the stored atoms is possible. The measured energy distribution is consistent with a harmonic potential shape and allows for the determination of temperatures and heating rates. From initial measurements, the thermal energy is found to be about 10 % of the trap depth. Using a crossed-beam geometry with red-detuned laser light, efficient transfer of atoms between the beams is observed. Optimum transfer occurs when the two beams cross at a radial offset, which can qualitatively be understood when the particle energy and geometrical properties of the two-beam trapping potential are considered. Numerical simulations reproduce the general features of the measured transfer efficiency vs. radial beam offset. This experiment is a first step towards dynamically variable potentials. Atoms have been radially confined in a blue-detuned hollow beam, and their decay time has been determined. This configuration is currently extended to a three-dimensionally confining blue-detuned dipole trap. For advanced laser cooling, state manipulation and spectroscopy of trapped atoms, a system of two diode lasers has been set up which are phase-coherently locked with a difference frequency near 6.834 GHz, to drive Raman transitions between the hyperfine-split ground states of 87Rb atoms. Resonances of such a transition have been recorded in a buffer gas loaded rubidium vapour cell with linewidths below 100 Hz.