Modeling a barrier penetration system, using a well rounded two minima potential, we present computational results of quantum mechanical sequential measurements of the position of a trapped particle. We calculate the barrier penetration time for various measurement techniques and compare these with the results for the undisturbed particle propagation. We find no evidence to support the quantum Zeno effect.
Modeling a barrier penetration system, using a well rounded two minima potential, we present computational results of quantum mechanical sequential measurements of the position of a trapped particle. We calculate the barrier penetration time for various measurement techniques and compare these with the results for the undisturbed particle propagation. We find no evidence to support the quantum Zeno effect.
We present computational results of quantum-mechanical sequential measurements of a single dynamical variable (position) in a barrier penetration system. Our model is based on a well-rounded two-minima potential with a particle initially located on one side of the barrier. First we allow the particle wave function to propagate without further disturbance and calculate its barrier penetration time, then we perform measurements of the particle's position and contrast the barrier penetration time T with the results for the undisturbed system. The time-dependent Schr\"odinger equation for the problem was solved using fast-Fourier-transform techniques. The barrier penetration time was found to depend on (1) the type of measurement made, (2) the strength of the interaction of the system with the meter, (3) the rate at which the measurements were performed, and (4) the precision of the meter (which in our model is related to the width of the meter's wave function). We find no evidence in support of the Zeno effect. However, by using a caricature of quantum mechanics we can obtain results similar to the Zeno effect.
This paper presents a simple model for repeated measurement of a quantum system: the evolution of a free particle, simulated by discretizing the particle's position. This model is easily simulated by computer and provides a useful arena to investigate the effects of measurement upon dynamics, in particular the slowing of evolution due to measurement (the quantum Zeno effect). The results of this simulation are discussed for two rather different sorts of measurement process, both of which are (simplified forms of) measurements used in previous simulations of position measurement. A number of interesting results due to measurement are found, and the investigation casts some light on previous disagreements about the presence or absence of the Zeno effect.
We examine results presented by Fearn and Lamb [Phys. Rev. A 46, 1199 (1992)], who search for, but fail to find, the quantum Zeno effect in measurements of the position of a particle in a double potential well, and criticize the basic statement of the effect given by Misra and Sudarshan [J. Math. Phys. 18, 756 (1977)]. We suggest that position measurements are an inappropriate area to look for the effect; nevertheless, we show that some of the results of Fearn and Lamb should, and do, exhibit a form of weak effect. Though the collapse postulate, as used by Misra and Sudarshan, is not required to discuss quantum measurement and the quantum Zeno effect, its application describes adequately the results of measurement, and we reject the idea that the basic statement of the quantum Zeno effect is flawed.
Abstract—The issue of how observation of a process in quantum mechanics may influence its outcome is described by case studies of quantum emission by a two-level system and the passage of a particle through a potential barrier. In the first case, the observation can reduce the probability of quantum emission by the two-level system (the quantum Zeno effect). In the second case, the observation of a particle can significantly increase the probability for a particle to pass through a barrier, sometimes even by many orders of magnitude (the barrier anti-Zeno effect). The possibility of such effects in biological systems is discussed.
This is a theoretical thesis in the area of quantum measurement theory. Due to the extensive breadth of this field we choose to narrow our focus to examine a particular problem - the quantum Zeno effect (defined below). Quantum measurement theory is introduced in Chap. 1, using the terminology of effects and operations. This approach allows an operational definition of such terms as a state vector, an ensemble, and a measurement device (for instance), and a consideration of interactions between quantum systems and inaccurate measurement devices. We further introduce the quantum trajectories approach to consider the evolution of an individual quantum system subject to measurement. The quantum Zeno effect is introduced in Chap. 2. Any quantum treatment of a measurement interaction must consider the measurement backaction onto the measured system and this backaction will disrupt the free evolution of the system. The quantum Zeno effect occurs in the strong measurement limit where the measurement backaction totally freezes the evolution of the system, thus rendering the measurement useless. The effect is introduced via projective measurements of two level systems subject to measurement of level populations. At this stage we are able to discuss the main questions addressed by this thesis, and present its structure in Chap. 2. We then develop a new measurement model for the interaction between a system and a measurement device in Chap. 3. Our motivation in doing this is to better model the usual laboratory meter, and in our approach the meter dynamics are such that it relaxes towards an appropriate readout of the system parameter of interest. The irreducible quantum noise of the meter introduces fluctuations that drive the stochastic dynamical collapse of the system wavefunction. In our model, the measured system dynamics (if treated selectively) are described by a stochastic, nonlinear Schroedinger equation. A double well system subject to position measurement provides a natural first application for this model. This is done in Chap. 4 where we monitor the coherent tunnelling of a particle from one well to the other. The advantage afforded by considering this system is that it displays differing regimes where the measurement observable (position) is approximated as possessing either, respectively, a continuous or a discrete eigenvalue structure. Thus, we use this one model to explore the quantum Zeno effect in both measurement regimes. The above treatment is of a theoretical measurement model. In Chap. 5 we turn to consider a recent experimental test of the quantum Zeno effect which examined the dynamics of a two level atom subject to pulsed measurements of atomic level populations. We treat a slightly modified experiment in a fully continuous measurement regime. By first unravelling the optical Bloch equations, and second, using the quantum trajectories approach we demonstrate the existence of certain measurement regimes where there is a quantum Zeno effect, and other regimes where no measurement of the atomic populations is being effected at all. Through these results we demonstrate the importance of making a full analysis of the system-detector interaction before any conclusions can be made. In the remainder of the thesis we propose further possible tests of the quantum Zeno effect. In Chap. 6 the evolution of a Rydberg atom exchanging one photon with a single cavity mode subject to measurement is examined. The measurement is made by monitoring the photon number occupancy of the cavity mode using a beam of Rydberg atoms configured so as to perform phase sensitive detection. In the limit of frequent monitoring we show that the free oscillation of the atomic inversion is disrupted, and the atom is trapped close to its initial state. This is the quantum Zeno effect. In Chap. 7 we realize the Zeno effect on two possible systems. We consider first, a two level Jaynes-Cumming atom interacting with a cavity mode, and second, two electromagnetic modes configured as a multi-level parametric frequency converter. These systems interact with another cavity mode via a quadratic coupling system based on four wave mixing, and constructed to be a quantum nondemolition measurement of the photon number. This mode is damped to the environment thus effecting a measurement of the system populations. Again we show that this interaction, can manifest the quantum Zeno effect. Our explicit modelling of the system-detector interaction enables us to show how the effect depends on the resolution time of the detector. Finally, we consider a proposed measurement of the square of the quadrature phase of an electromagnetic mode in Chap. 8. Here, a three mode interaction mediated by a second order nonlinear susceptibility is considered. One mode, the pump, is prepared in a feedback generated photon number state to give insight into the role of pump noise. The other two modes are treated as an angular momentum system, and we show that photon counting on the two mode rotation system effects the above mentioned measurement. In addition, this measurement provides a direct measure of the second order squeezing of the signal. With that we finish our investigation of the quantum Zeno effect using the techniques of quantum measurement theory. However, in the epilogue [Chap. 9] we note that no thesis in quantum measurement theory would be complete without some consideration of the ``meaning attributed to the theory. In the epilogue we take a novel historical approach and examine the method by which metaphysical theories are formed to draw conclusions regarding quantum metaphysics.