Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Cambridge University Press eBooks

Protective and state measurement: a review

Gennaro Auletta

Published Nov 30, 2014• 1 citation
Publisher

Abstract

In this chapter, I summarize the general way in which the measurement process can be cast (by making use of effects and amplitude operators). Then, I show that there are two main problems with the state measurement: (i) how to avoid the disruptive back action on the state of the measured system during detection and (ii) how to extract complete information from this state. In order to deal with them I first introduce quantum non-demolition (QND) measurement and examine the problem whether the entire probability distribution of the measured observable is not altered by a QND measurement, which would allow repeated QND measurements with different observables to extract the whole information from the measured system. However, I show that this is not the case. Then, I deal with protective measurement as such and show that a reversible measurement is in fact not a measurement. However, by taking advantage of statistical methods (and therefore by renouncing measurement of the state of a single system), we can indeed reconstruct the wave function but only by partially recovering the information contained in the state. Two further prices to pay are to admit the existence of negative quasi-probabilities due to the interference terms and to make use of unsharp observables for guaranteeing informational completeness. Introduction The aim of this chapter is a review of the developments related to the measurement of the state vector and the problems that have been raised in this context. Traditionally, the state vector or the wave function describing quantum systems has been considered as a formal tool for calculating the probabilities associated with certain events like measurement outcomes, but few scholars have tried to attribute to it an ontological status. It is well known how many difficulties are related to an attempt at assigning a kind of reality to the state of quantum systems.

DOI
10.1017/cbo9781107706927.005

Related papers

Demolishing quantum nondemolition

Christopher R. Monroe

Most physicists are taught that quantum physics has two parts: coherent wave mechanics, in which quantum states evolve according to the reversible Schrödinger wave equation, and the measurement process, in which quantum states irreversibly collapse into a particular state given by the details of the measurement. So when a quantum superposition state such as a|0〉 + b|1〉 is measured with a device that discriminates perfectly between |0〉 and |1〉, the system evolves to the definite state |0〉 or |1〉 with respective probabilities |a|2 and |b|2. Of course, when such an ideal measurement is repeated on the surviving state, the same definite state will appear again and again. Many of us, starting with Albert Einstein, do not like the apparent disconnect between those two rules and may not even subscribe to that conventional “Copenhagen interpretation” of quantum mechanics. It is nevertheless useful because it correctly predicts the results of all experiments performed to date, even though it gives the appearance that the observer necessarily affects the system.In the past two decades, the advent of quantum information science and the ability of experiments to control quantum systems such as single atoms have provided the happy opportunity to once again ponder the disconnect between the fundamental quantum concepts of coherent evolution and measurement. Quantum systems can now be measured with nearly perfect efficiency, meaning that the observed distribution of a measurement is given almost exactly by the probabilities of the underlying superposition, as prescribed by the conventional Copenhagen rules that we are taught.However, a new term, the quantum nondemolition, or QND, has crept into the literature these past decades. Also known as “quantum back-action-evading measurement,” it’s a needlessly confusing term that seems to highlight the mundane aspect of a perfect quantum measurement: If one already knows that the system is in a particular eigenstate of the measuring device, then, obviously, a measurement on the system will produce that eigenstate and leave the system intact. Zero information is gained from the repeated measurement. On the other hand, when the system is not in an eigenstate of the measuring device, the quantum state can be thought to collapse to one of its eigenstates. In that case, information is gained from the system, and the QND measurement most certainly demolishes the system. The concept of QND measurement adds nothing to the usual rules of quantum measurement, regardless of interpretation. But worse, the term confounds students and newcomers who may even be comfortable with the prescriptions of quantum physics.Not all measurements are perfect, of course, and some people may wish to use the QND nomenclature to distinguish the efficiency of a measuring device. However, in the spirit of quantum decoherence theory (see, for example, Wojciech Zurek’s article in PHYSICS TODAY, October 1991, page 36), we can still think of any measurement as a QND measurement plus a possible interaction with a reservoir that can either mask the information obtained from the system or even uncontrollably change the quantum state. The interaction with the reservoir is what can make quantum problems difficult, and it is there that we confront the conceptual difficulties with quantum mechanics and the quantum–classical divide.As a common example of an imperfect measurement, consider photodetection. When a single photon strikes a photomultiplier tube and generates a pulse of photocurrent, the photon is lost forever. Or is it? The photocurrent may interact with a macroscopic system of a bulk conductor, and we may measure the resulting voltage across the conductor. Sure, the photon has disappeared, but if our detector indicates that we had one photon, we can always create another and get the same answer again and again, exactly like a QND measurement. Even if we begin with a coherent superposition of zero and one photon, which is not an eigenstate of our measurement device, that approach works. After the first measurement collapses the state into |0〉 or |1〉, we know which one came out and we either prepare zero or one photon forever after. A real photodetector is not 100% efficient, of course, meaning that a single photon striking the detector could register nothing, or that even in the absence of photons the noisy detector fires anyway. Again we can think of this as a QND measurement in which we have lost information to the environment. In practice, we trace over the environment and then must describe the system in terms of a density matrix containing the probabilities of various outcomes.In every case, the concept of QND measurement is confusing and unnecessary. It wasn’t needed in the formative years of quantum mechanics; and now with quantum information theory, entanglement, and decoherence theory, we still do not need it. Marvelous advances in many experimental quantum systems, such as individual atoms and superconducting circuits, are allowing quantum measurements to be performed almost exactly like in textbooks, as most of us have learned. Why not demolish the term “QND”?© 2011 American Institute of Physics.

Physics Today•Dec 30, 2010•12 citations

Epilogue

Shan Gao

In this book, I have argued that the wave function in quantum mechanics is real, and it represents the state of random discontinuous motion (RDM) of particles in three-dimensional space. Moreover, this picture of quantum ontology is complete in accounting for our definite experience, but it requires that the quantum dynamics be revised to include a stochastic, nonlinear evolution term resulting from the RDM of particles. Obviously I took a road less traveled by researchers in the foundations of quantum mechanics. In order to convince more readers that this road is deserved to be taken, I will review the main results of this book and discuss them in a broader context. The starting point of my road is protective measurements (Chapter 1). In 1993, this new method of measurement in quantum mechanics was discovered (Aharonov and Vaidman, 1993; Aharonov, Anandan, and Vaidman, 1993). Distinct from conventional projective measurements, protective measurement is a method for measuring the expectation value of an observable on a single quantum system. By a series of protective measurements, one can even measure the wave function of a single quantum system. Therefore, besides the Born rule for projective measurements, protective measurements provide another, more direct connection between the wave function and results of measurements, which is not probabilistic but definite. It can be expected that a definite connection between the wave function and results of measurements is more important for understanding the meaning of the wave function and searching for the ontology of quantum mechanics. However, it seems that this connection provided by protective measurements is still less well known today, and its significance has not been fully realized by most researchers, either. The first stop on my road is the reality of the wave function (Chapter 4). It is correct to say that protective measurements alone do not imply the reality of the wave function. An additional connection between the state of reality and results of measurements is needed.

Cambridge University Press eBooks•Jan 1, 2017•0 citations

State measurement in quantum mechanics

Gennaro Auletta, Mauro Fortunato, Giorgio Parisi A

In classical mechanics, as we know, all observables commute with each other and therefore belong to the same “commuting set.” This means that – in principle – we can measure all observables simultaneously. Then, the state manifests itself as a collection of properties (of values of observables) (see Sec. 1.1), and as such it is observable. On the other hand, quantum-mechanical observables may not commute (see Subsec. 2.1.5). As a consequence, the state is not just a collection of observable values (see also Sec. 2.3) so that we may ask ourselves whether it is observable or not, and therefore raise the following question: What is the nature of the wave function? Is it simply a mathematical tool, i.e. does it only represent the sum of all that we can know about a system? Or does it have an ontological status? Since the early days of quantum mechanics, this question has been very popular. As a first attempt, de Broglie tried to interpret the wave function as describing, in classical terms, a wave field that envelopes a classical particle (see also Subsec. 16.3.2). This theory should predict the existence of empty waves, but several experiments have shown negative results (see also the end of Sec. 9.6). More recently, many physicists have tried to propose some methods in order to measure the wave function. Here we shortly report on some of these proposals and discuss to what extent the quantum state can be measured.

Cambridge University Press eBooks•Apr 16, 2009•0 citations

Protective measurement and the nature of the wave function within the primitive ontology approach

Vincent Lam

Introduction One of the crucial issues about protective measurements is the extent to which they provide (additional) grounds for some realist understanding of the wave function. This issue is notoriously subject to debate, which is not the aim of this chapter. Rather, this chapter aims at clarifying the further issue of the ontological picture corresponding to the realist understanding of the wave function possibly suggested by protective measurements. Oddly enough, proponents of a realist reading of protective measurements remain in general rather vague about ontology (see for instance Aharonov et al. (1993, 4624), who assimilate the wave function to an “extended object” without further details, or the brief and somewhat unprecise discussion in Dickson (1995, 135–136) of the interpretation of the wave function within Bohmian mechanics (BM) and within the theoretical framework elaborated by Ghirardi, Rimini and Weber (GRW); in this volume, Gao does propose a more elaborated ontological model for quantum mechanics (QM) based on protective measurements). Despite this vagueness (or maybe because of it), it seems that the most obvious ontological intuition resulting from protective measurements points towards some form of straightforward realism about the wave function understood in the sense of a real, physical field: indeed, protective measurements are claimed to allow measuring expectation values of observables on a single quantum system, thereby providing the possibility of reconstructing (i.e. “measuring” in some sense) the wave function of a single quantum system. Aharonov et al. (1996, 125) clearly express this intuition: “We can observe the expectations values of operators, and we can observe the density and the current of the Schrödinger wave. We can “see” in some sense the Schrödinger wave. This leads us to believe that it has physical reality.” Therefore, this kind of intuition seems in line with a realist conception of the wave function, according to which the wave function is considered as a real substantial, material in some sense) entity on its own (this view is often called “wave function realism”).

Cambridge University Press eBooks•Nov 30, 2014•0 citations

Towards the ideal quantum measurement

Matthew Colleti

According to the Heisenberg uncertainty principle, if we measure one variable describing a physical system, we inevitably introduce noise into some other variable describing the same system. In practice, the situation is worse than that: measuring one variable usually introduces random noise into the very quantity we are measuring. It is possible in principle to make measurements, known as quantum non-demolition (or QND) measurements, which do not have this latter effect. A QND measurement may approach the ideal quantum measurement commonly encountered in quantum mechanics textbooks. Philippe Grangier and his co-workers at the Université Paris-Sud, at Orsay in France, have recently attempted to measure the intensity of a beam of light in this way (Phys. Rev. Len. (1991) 66 1418). Their experiment has shown that it is indeed possible to make a measurement which at least partially preserves the quantum mechanical state of the detected beam.

Physics World•Jun 1, 1991•1 citation

Entanglement, scaling, and the meaning of the wave function in protective measurement

Maximilian Schlosshauer, Tangereen V. B. Claringbold

We examine the entanglement and state disturbance arising in a protective measurement and argue that these inescapable effects doom the claim that protective measurement establishes the reality of the wave function. An additional challenge to this claim results from the exponential number of protective measurements required to reconstruct multi-qubit states. We suggest that the failure of protective measurement to settle the question of the meaning of the wave function is entirely expected, for protective measurement is but an application of the standard quantum formalism, and none of the hard foundational questions can ever be settled in this way. Introduction From the start, the technical result of protective measurement has been suggested to have implications for the interpretation of quantum mechanics. Consider how Aharonov and Vaidman [2] chose to begin their original paper introducing the idea of protective measurement: We show that it is possible to measure the Schrödinger wave of a single quantum system. This provides a strong argument for associating physical reality with the quantum state of a single system.… Since then, the pioneers of protective measurement seem to have taken a more moderate stance. Vaidman [42], in a recent synopsis of protective measurement, concedes that the protective measurement procedure is not a proof that we should adopt one interpretation instead of the other, but it is a good testbed which shows advantages and disadvantages of various interpretations. Notwithstanding this more subtle perspective and a number of critical studies of the technical and foundational aspects of protective measurement, Gao [21] has maintained, if not amplified, the force of Aharonov and Vaidman's original argument: An immediate implication is that the result of a protective measurement, namely the expectation value of the measured observable in the measured state, reflects the actual physical property of the measured system, as the system is not disturbed after this result has been obtained. […]

arXiv:1402.1217•Cambridge University Press eBooks•Nov 30, 2014•8 citations
In this chapter, I summarize the general way in which the measurement process can be cast (by making use of effects and amplitude operators). Then, I show that there are two main problems with the state measurement: (i) how to avoid the disruptive back action on the state of the measured system during detection and (ii) how to extract complete information from this state. In order to deal with them I first introduce quantum non-demolition (QND) measurement and examine the problem whether the entire probability distribution of the measured observable is not altered by a QND measurement, which would allow repeated QND measurements with different observables to extract the whole information from the measured system. However, I show that this is not the case. Then, I deal with protective measurement as such and show that a reversible measurement is in fact not a measurement. However, by taking advantage of statistical methods (and therefore by renouncing measurement of the state of a single system), we can indeed reconstruct the wave function but only by partially recovering the information contained in the state. Two further prices to pay are to admit the existence of negative quasi-probabilities due to the interference terms and to make use of unsharp observables for guaranteeing informational completeness. Introduction The aim of this chapter is a review of the developments related to the measurement of the state vector and the problems that have been raised in this context. Traditionally, the state vector or the wave function describing quantum systems has been considered as a formal tool for calculating the probabilities associated with certain events like measurement outcomes, but few scholars have tried to attribute to it an ontological status. It is well known how many difficulties are related to an attempt at assigning a kind of reality to the state of quantum systems.
Most physicists are taught that quantum physics has two parts: coherent wave mechanics, in which quantum states evolve according to the reversible Schrödinger wave equation, and the measurement process, in which quantum states irreversibly collapse into a particular state given by the details of the measurement. So when a quantum superposition state such as a|0〉 + b|1〉 is measured with a device that discriminates perfectly between |0〉 and |1〉, the system evolves to the definite state |0〉 or |1〉 with respective probabilities |a|2 and |b|2. Of course, when such an ideal measurement is repeated on the surviving state, the same definite state will appear again and again. Many of us, starting with Albert Einstein, do not like the apparent disconnect between those two rules and may not even subscribe to that conventional “Copenhagen interpretation” of quantum mechanics. It is nevertheless useful because it correctly predicts the results of all experiments performed to date, even though it gives the appearance that the observer necessarily affects the system.In the past two decades, the advent of quantum information science and the ability of experiments to control quantum systems such as single atoms have provided the happy opportunity to once again ponder the disconnect between the fundamental quantum concepts of coherent evolution and measurement. Quantum systems can now be measured with nearly perfect efficiency, meaning that the observed distribution of a measurement is given almost exactly by the probabilities of the underlying superposition, as prescribed by the conventional Copenhagen rules that we are taught.However, a new term, the quantum nondemolition, or QND, has crept into the literature these past decades. Also known as “quantum back-action-evading measurement,” it’s a needlessly confusing term that seems to highlight the mundane aspect of a perfect quantum measurement: If one already knows that the system is in a particular eigenstate of the measuring device, then, obviously, a measurement on the system will produce that eigenstate and leave the system intact. Zero information is gained from the repeated measurement. On the other hand, when the system is not in an eigenstate of the measuring device, the quantum state can be thought to collapse to one of its eigenstates. In that case, information is gained from the system, and the QND measurement most certainly demolishes the system. The concept of QND measurement adds nothing to the usual rules of quantum measurement, regardless of interpretation. But worse, the term confounds students and newcomers who may even be comfortable with the prescriptions of quantum physics.Not all measurements are perfect, of course, and some people may wish to use the QND nomenclature to distinguish the efficiency of a measuring device. However, in the spirit of quantum decoherence theory (see, for example, Wojciech Zurek’s article in PHYSICS TODAY, October 1991, page 36), we can still think of any measurement as a QND measurement plus a possible interaction with a reservoir that can either mask the information obtained from the system or even uncontrollably change the quantum state. The interaction with the reservoir is what can make quantum problems difficult, and it is there that we confront the conceptual difficulties with quantum mechanics and the quantum–classical divide.As a common example of an imperfect measurement, consider photodetection. When a single photon strikes a photomultiplier tube and generates a pulse of photocurrent, the photon is lost forever. Or is it? The photocurrent may interact with a macroscopic system of a bulk conductor, and we may measure the resulting voltage across the conductor. Sure, the photon has disappeared, but if our detector indicates that we had one photon, we can always create another and get the same answer again and again, exactly like a QND measurement. Even if we begin with a coherent superposition of zero and one photon, which is not an eigenstate of our measurement device, that approach works. After the first measurement collapses the state into |0〉 or |1〉, we know which one came out and we either prepare zero or one photon forever after. A real photodetector is not 100% efficient, of course, meaning that a single photon striking the detector could register nothing, or that even in the absence of photons the noisy detector fires anyway. Again we can think of this as a QND measurement in which we have lost information to the environment. In practice, we trace over the environment and then must describe the system in terms of a density matrix containing the probabilities of various outcomes.In every case, the concept of QND measurement is confusing and unnecessary. It wasn’t needed in the formative years of quantum mechanics; and now with quantum information theory, entanglement, and decoherence theory, we still do not need it. Marvelous advances in many experimental quantum systems, such as individual atoms and superconducting circuits, are allowing quantum measurements to be performed almost exactly like in textbooks, as most of us have learned. Why not demolish the term “QND”?© 2011 American Institute of Physics.
In this book, I have argued that the wave function in quantum mechanics is real, and it represents the state of random discontinuous motion (RDM) of particles in three-dimensional space. Moreover, this picture of quantum ontology is complete in accounting for our definite experience, but it requires that the quantum dynamics be revised to include a stochastic, nonlinear evolution term resulting from the RDM of particles. Obviously I took a road less traveled by researchers in the foundations of quantum mechanics. In order to convince more readers that this road is deserved to be taken, I will review the main results of this book and discuss them in a broader context. The starting point of my road is protective measurements (Chapter 1). In 1993, this new method of measurement in quantum mechanics was discovered (Aharonov and Vaidman, 1993; Aharonov, Anandan, and Vaidman, 1993). Distinct from conventional projective measurements, protective measurement is a method for measuring the expectation value of an observable on a single quantum system. By a series of protective measurements, one can even measure the wave function of a single quantum system. Therefore, besides the Born rule for projective measurements, protective measurements provide another, more direct connection between the wave function and results of measurements, which is not probabilistic but definite. It can be expected that a definite connection between the wave function and results of measurements is more important for understanding the meaning of the wave function and searching for the ontology of quantum mechanics. However, it seems that this connection provided by protective measurements is still less well known today, and its significance has not been fully realized by most researchers, either. The first stop on my road is the reality of the wave function (Chapter 4). It is correct to say that protective measurements alone do not imply the reality of the wave function. An additional connection between the state of reality and results of measurements is needed.
In classical mechanics, as we know, all observables commute with each other and therefore belong to the same “commuting set.” This means that – in principle – we can measure all observables simultaneously. Then, the state manifests itself as a collection of properties (of values of observables) (see Sec. 1.1), and as such it is observable. On the other hand, quantum-mechanical observables may not commute (see Subsec. 2.1.5). As a consequence, the state is not just a collection of observable values (see also Sec. 2.3) so that we may ask ourselves whether it is observable or not, and therefore raise the following question: What is the nature of the wave function? Is it simply a mathematical tool, i.e. does it only represent the sum of all that we can know about a system? Or does it have an ontological status? Since the early days of quantum mechanics, this question has been very popular. As a first attempt, de Broglie tried to interpret the wave function as describing, in classical terms, a wave field that envelopes a classical particle (see also Subsec. 16.3.2). This theory should predict the existence of empty waves, but several experiments have shown negative results (see also the end of Sec. 9.6). More recently, many physicists have tried to propose some methods in order to measure the wave function. Here we shortly report on some of these proposals and discuss to what extent the quantum state can be measured.
Introduction One of the crucial issues about protective measurements is the extent to which they provide (additional) grounds for some realist understanding of the wave function. This issue is notoriously subject to debate, which is not the aim of this chapter. Rather, this chapter aims at clarifying the further issue of the ontological picture corresponding to the realist understanding of the wave function possibly suggested by protective measurements. Oddly enough, proponents of a realist reading of protective measurements remain in general rather vague about ontology (see for instance Aharonov et al. (1993, 4624), who assimilate the wave function to an “extended object” without further details, or the brief and somewhat unprecise discussion in Dickson (1995, 135–136) of the interpretation of the wave function within Bohmian mechanics (BM) and within the theoretical framework elaborated by Ghirardi, Rimini and Weber (GRW); in this volume, Gao does propose a more elaborated ontological model for quantum mechanics (QM) based on protective measurements). Despite this vagueness (or maybe because of it), it seems that the most obvious ontological intuition resulting from protective measurements points towards some form of straightforward realism about the wave function understood in the sense of a real, physical field: indeed, protective measurements are claimed to allow measuring expectation values of observables on a single quantum system, thereby providing the possibility of reconstructing (i.e. “measuring” in some sense) the wave function of a single quantum system. Aharonov et al. (1996, 125) clearly express this intuition: “We can observe the expectations values of operators, and we can observe the density and the current of the Schrödinger wave. We can “see” in some sense the Schrödinger wave. This leads us to believe that it has physical reality.” Therefore, this kind of intuition seems in line with a realist conception of the wave function, according to which the wave function is considered as a real substantial, material in some sense) entity on its own (this view is often called “wave function realism”).
According to the Heisenberg uncertainty principle, if we measure one variable describing a physical system, we inevitably introduce noise into some other variable describing the same system. In practice, the situation is worse than that: measuring one variable usually introduces random noise into the very quantity we are measuring. It is possible in principle to make measurements, known as quantum non-demolition (or QND) measurements, which do not have this latter effect. A QND measurement may approach the ideal quantum measurement commonly encountered in quantum mechanics textbooks. Philippe Grangier and his co-workers at the Université Paris-Sud, at Orsay in France, have recently attempted to measure the intensity of a beam of light in this way (Phys. Rev. Len. (1991) 66 1418). Their experiment has shown that it is indeed possible to make a measurement which at least partially preserves the quantum mechanical state of the detected beam.
We examine the entanglement and state disturbance arising in a protective measurement and argue that these inescapable effects doom the claim that protective measurement establishes the reality of the wave function. An additional challenge to this claim results from the exponential number of protective measurements required to reconstruct multi-qubit states. We suggest that the failure of protective measurement to settle the question of the meaning of the wave function is entirely expected, for protective measurement is but an application of the standard quantum formalism, and none of the hard foundational questions can ever be settled in this way. Introduction From the start, the technical result of protective measurement has been suggested to have implications for the interpretation of quantum mechanics. Consider how Aharonov and Vaidman [2] chose to begin their original paper introducing the idea of protective measurement: We show that it is possible to measure the Schrödinger wave of a single quantum system. This provides a strong argument for associating physical reality with the quantum state of a single system.… Since then, the pioneers of protective measurement seem to have taken a more moderate stance. Vaidman [42], in a recent synopsis of protective measurement, concedes that the protective measurement procedure is not a proof that we should adopt one interpretation instead of the other, but it is a good testbed which shows advantages and disadvantages of various interpretations. Notwithstanding this more subtle perspective and a number of critical studies of the technical and foundational aspects of protective measurement, Gao [21] has maintained, if not amplified, the force of Aharonov and Vaidman's original argument: An immediate implication is that the result of a protective measurement, namely the expectation value of the measured observable in the measured state, reflects the actual physical property of the measured system, as the system is not disturbed after this result has been obtained. […]