Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

CRC Press eBooks

Optical waves in stratified media

Subhasish Dutta Gupta, Nirmalya Ghosh, Ayan Banerjee

Published Oct 7, 2015• 0 citations
Publisher

Abstract

Often in optics we must deal with layered media when the optical properties change only in one specific direction (say, along the z-axis), while in any plane transverse to this direction, the optical properties are invariant. Such media with dielectric and magnetic responses given by ε(z) and µ(z) as functions of only z are also referred to as stratified media. There are many examples Wave Trends of such media. The most useful one refers to the optical interference coatings that are essential for most optical instruments. Reflection and transmission through these structures can be handled in terms of simple 2 × 2 matrices when the constituent layers are homogeneous and isotropic. In the case of an anisotropic layered medium, we can develop a 4 × 4 matrix formulation for uniaxial materials [61, 62]. In this chapter we deal with isotropic homogeneous layers and develop the characteristics matrix formalism to obtain the refection and transmission coefficients (see also Ref. [31]). We discuss how the dispersion in such structures can be engineered to lead to slow and fast light [7]. We apply the technique to investigate the modes of a structure. We probe the effects of finite temporal width of a pulse leading to the Wigner delay [63]. The space equivalent of Wigner delay, also known as the Goos-Ha¨nchen shift [64], for a spatially finite beam is then discussed. Finally, we show how someone using such structures can realize perfect transmission and coherent perfect absorption. We will define all the necessary notions and concepts as we go along.

DOI
10.1201/b19330-13

Related papers

Complement 7B: Nonlinear optics in optical Kerr media

G. Grynberg, Alain Aspect, Claude Fabre +1 more

In this complement we discuss several examples of optical phenomena in media where the refractive index depends nonlinearly on the intensity , known as optical Kerr media. This nonlinear effect exists in all materials, even isotropic ones, like glass or fused silica, but it is particularly marked in certain physical systems to be exemplified in Section 7B.1. After investigating the propagation of light through such media in Section 7B.2, we shall discuss three applications of the optical Kerr effect (which can be studied in any order). We begin by describing a bistable optical system , when this nonlinear medium is inserted in a Fabry–Perot cavity (Section 7B.3). We then study phase conjugate mirrors and examine their potential applications in adaptive optics (Section 7B.4). Finally, we discuss certain effects occurring during the propagation of an isolated wave, bounded either transversely or temporally, in a Kerr medium, and describe self-focusing effects (Section 7B.5) and self-phase-modulation effects (Section 7B.6). In particular, we shall show that nonlinear effects and dispersion effects can compensate to produce stable structures known as solitons , which maintain their shape during propagation. Examples of third-order nonlinearities Nonlinear response of two-level atoms We begin by studying a simple case of a nonlinear interaction, namely a two-level quantum system under the effects of a plane wave.

Cambridge University Press eBooks•Sep 2, 2010•0 citations

Sub and superluminal propagation through stratified media

V. S. C. Manga Rao, S. Dutta Gupta

Pulse propagation through 1-dimensional stratified media is studied. The general features of pulse propagation in relation to the delay or advancement of the pulse are discussed. It is shown that in a lossless system with spatial symmetry the reflected and the transmitted pulses have the same delay or advancement. The phase times and the explicit output pulse profiles for an input Gaussian pulse are calculated. While recalling recent results for a variety of systems (resonant absorbers or heterogeneous medium in a Fabry-Perot cavity, a slab of negative index medium, a left-handed/right-handed periodic structure, etc.), new results involving coupled waveguides and a high finesse cavity containing an electromagnetically induced transparency (EIT) medium are presented. Calculations clearly show that for pulses with a carrier tuned at the resonance of the stratified media, one generally has subluminal propagation. Alternatively, in stop gaps or away from the resonances one ends up with superluminal transit. In the case of the EIT cavity it is shown that the large dispersion offered by the intracavity medium can lead to substantial superluminality (ng≃−106) with peak transmission as high as 20%. This is in sharp contrast to large signal attenuation for usual superluminal transit. Note also that EIT, to the best of the authors knowledge, has so far been used to achieve only slow light.

IEE Proceedings - Circuits Devices and Systems•Jan 1, 2005•2 citations

Optically anisotropic vapours

Dieter Suter

From a macroscopic viewpoint, atomic vapours appear homogeneous and isotropic. As we have seen during the discussion of the microscopic dynamics that light induces in atomic systems, however, the interaction with light as well as external fields can break the rotational and translational symmetries and make the system both inhomogeneous and anisotropic. This microscopic anisotropy appears directly in the optical properties of the system. This chapter discusses the propagation of light in such a medium and describes experiments that analyse the transmitted light to obtain information about the microscopic state of the medium. Isotropic atoms The Lorentz–Lorenz model Outline The interaction of electromagnetic radiation with matter, in particular light, has inspired philosophers of nature for many centuries and has led to heated debates like the one between Newton and Goethe. The original interest was with the difference in absorption of various materials as a function of the optical wavelength and with the refraction of light, i.e., its dispersion. The first theoretical analysis that connected these macroscopic effects to microscopic properties of the material was the Lorentz–Lorenz theory of dispersion (Lorentz 1880; Lorenz 1881), which was put forward shortly after the Maxwell equations and published in the year after Maxwell's death. (See Figure 6.1.) This theory models the material as a collection of dipoles, driven by the electromagnetic wave. We give here a brief summary of the theory, since its physical content is still the foundation of today's description although the mathematical formalism has changed significantly.

Cambridge University Press eBooks•Oct 13, 1997•0 citations

OPTICAL BEAMS AS QUANTUM MODELS

Franco Gori

The differential equation governing, within the paraxial regime, the propagation of an optical field through a medium with variable refractive index is formally identical to the time-dependent Schroedinger equation for a particle in two dimensions. In particular, the wave function of the particle plays the role of the transverse disturbance of the optical field, the potential acts as the modulation of the refractive index, and time evolution is replaced by the propagation along the longitudinal coordinate. An interesting consequence of such analogy is that well known propagation features of light in some media can afford a model for the time evolution of quantum wavefunctions of a particle within the corresponding potential. Finding the stationary states of a given potential, for instance, turns out to be equivalent to finding the propagation modes in a suitably chosen guiding structure. The simplest case is that of an optical beam propagating inside a homogeneous medium and it corresponds to a free particle on a plane evolving in time. Well, the time evolution of the particle wavefunction can be predicted, starting from its expression at the starting time, using a propagator that can be immediately derived from the Fresnel integral. Yet, it is not difficult to conceive, by suitably superposing eigenstates of the energy of the free particle, a wavefunction whose squared modulus does not change with time, in perfect analogy with an optical nondiffracting Bessel beam. A slightly less trivial case is that of the propagation inside an optical fibre having parabolic refractive index. It is known that the modes of such a fibre are Hermite-Gaussian modes, whose width is determined by the parameter governing the refractive index variation. The quantum analog is a two-dimensional harmonic oscillator, whose energy eigenstates are, of course, the same Hermite-Gaussian functions, and this is, actually, even better known. But the optical analogy allows us also to predict behaviors of the quantum particle that are not completely trivial. It is the case, for instance, of a fundamental Gaussian beam that is injected into the fiber off axis. If the width of the Gausian is chosen as that of the propagation modes of the fiber, the beam will propagate inside the fibre without changing its width, but its center will oscillate around the axis of the fiber. This is due to the “lens-like” effect of a fiber with parabolic refractive index. This corresponds to a coherent state of the harmonic oscillator. Due to the same effect, if we inject off-axis a Gaussian beam with a different spot size, then the beam not only oscillates around the axis, but also changes its width, passing periodically from smaller to larger values of the spot size. This corresponds to a squeezed state of the harmonic oscillator. Further significant cases can be considered, such as those pertinent to optical waveguides, that correspond to potential wells for the quantum particle. Even in such cases, classical results concerning the propagation of the optical fields can help to solve analogous quantum problems, as far as the determination of the stationary states and of the energy eigenvalues, and the time evolution of the system is concerned. Finally, starting from the above analogy, a correspondence between partially coherent beams and mixed quantum states can be established. It stems from the equivalence between the cross-spectral density function, defined within the second-order coherence theory, and the density matrix, used to describe quantum mixed states. Results obtained in the field of the partial coherence optics, such as those pertinent to the well-known Gaussian Schell-model sources, can be easily transposed into the quantum realm. Note from Publisher: This article contains the abstract only.

•Aug 1, 2004•0 citations

Wigner functions in optics: describing beams as ray bundles and pulses as particle ensembles

Miguel Angel Alonso

This tutorial gives an overview of the use of the Wigner function as a tool for modeling optical field propagation. Particular emphasis is placed on the spatial propagation of stationary fields, as well as on the propagation of pulses through dispersive media. In the first case, the Wigner function gives a representation of the field that is similar to a radiance or weight distribution for all the rays in the system, since its arguments are both position and direction. In cases in which the field is paraxial and where the system is described by a simple linear relation in the ray regime, the Wigner function is constant under propagation along rays. An equivalent property holds for optical pulse propagation in dispersive media under analogous assumptions. Several properties and applications of the Wigner function in these contexts are discussed, as is its connection with other common phase-space distributions like the ambiguity function, the spectrogram, and the Husimi, P, Q, and Kirkwood–Rihaczek functions. Also discussed are modifications to the definition of the Wigner function that allow extending the property of conservation along paths to a wider range of problems, including nonparaxial field propagation and pulse propagation within general transparent dispersive media.

Advances in Optics and Photonics•Nov 17, 2011•179 citations

Optical transparency modes in anisotropic media

S. V. Sazonov, N. V. Ustinov

The modes of nonlinear propagation of the two-component electromagnetic pulses through optically uniaxial media containing resonant particles are studied. The features of their manifestation in the "dense" media and in the media with expressed positive and negative birefringences are discussed. It is shown that exponentially and rationally decreasing solutions of the system of material and wave equations allow us also to describe the propagation of the pulses of the self-induced transparency in isotropic media in the case, when the direct electric dipole-dipole interaction between the resonant particles is taken into account.

arXiv:nlin/0507064•Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•May 3, 2006•1 citation
Often in optics we must deal with layered media when the optical properties change only in one specific direction (say, along the z-axis), while in any plane transverse to this direction, the optical properties are invariant. Such media with dielectric and magnetic responses given by ε(z) and µ(z) as functions of only z are also referred to as stratified media. There are many examples Wave Trends of such media. The most useful one refers to the optical interference coatings that are essential for most optical instruments. Reflection and transmission through these structures can be handled in terms of simple 2 × 2 matrices when the constituent layers are homogeneous and isotropic. In the case of an anisotropic layered medium, we can develop a 4 × 4 matrix formulation for uniaxial materials [61, 62]. In this chapter we deal with isotropic homogeneous layers and develop the characteristics matrix formalism to obtain the refection and transmission coefficients (see also Ref. [31]). We discuss how the dispersion in such structures can be engineered to lead to slow and fast light [7]. We apply the technique to investigate the modes of a structure. We probe the effects of finite temporal width of a pulse leading to the Wigner delay [63]. The space equivalent of Wigner delay, also known as the Goos-Ha¨nchen shift [64], for a spatially finite beam is then discussed. Finally, we show how someone using such structures can realize perfect transmission and coherent perfect absorption. We will define all the necessary notions and concepts as we go along.
In this complement we discuss several examples of optical phenomena in media where the refractive index depends nonlinearly on the intensity , known as optical Kerr media. This nonlinear effect exists in all materials, even isotropic ones, like glass or fused silica, but it is particularly marked in certain physical systems to be exemplified in Section 7B.1. After investigating the propagation of light through such media in Section 7B.2, we shall discuss three applications of the optical Kerr effect (which can be studied in any order). We begin by describing a bistable optical system , when this nonlinear medium is inserted in a Fabry–Perot cavity (Section 7B.3). We then study phase conjugate mirrors and examine their potential applications in adaptive optics (Section 7B.4). Finally, we discuss certain effects occurring during the propagation of an isolated wave, bounded either transversely or temporally, in a Kerr medium, and describe self-focusing effects (Section 7B.5) and self-phase-modulation effects (Section 7B.6). In particular, we shall show that nonlinear effects and dispersion effects can compensate to produce stable structures known as solitons , which maintain their shape during propagation. Examples of third-order nonlinearities Nonlinear response of two-level atoms We begin by studying a simple case of a nonlinear interaction, namely a two-level quantum system under the effects of a plane wave.
Pulse propagation through 1-dimensional stratified media is studied. The general features of pulse propagation in relation to the delay or advancement of the pulse are discussed. It is shown that in a lossless system with spatial symmetry the reflected and the transmitted pulses have the same delay or advancement. The phase times and the explicit output pulse profiles for an input Gaussian pulse are calculated. While recalling recent results for a variety of systems (resonant absorbers or heterogeneous medium in a Fabry-Perot cavity, a slab of negative index medium, a left-handed/right-handed periodic structure, etc.), new results involving coupled waveguides and a high finesse cavity containing an electromagnetically induced transparency (EIT) medium are presented. Calculations clearly show that for pulses with a carrier tuned at the resonance of the stratified media, one generally has subluminal propagation. Alternatively, in stop gaps or away from the resonances one ends up with superluminal transit. In the case of the EIT cavity it is shown that the large dispersion offered by the intracavity medium can lead to substantial superluminality (ng≃−106) with peak transmission as high as 20%. This is in sharp contrast to large signal attenuation for usual superluminal transit. Note also that EIT, to the best of the authors knowledge, has so far been used to achieve only slow light.
From a macroscopic viewpoint, atomic vapours appear homogeneous and isotropic. As we have seen during the discussion of the microscopic dynamics that light induces in atomic systems, however, the interaction with light as well as external fields can break the rotational and translational symmetries and make the system both inhomogeneous and anisotropic. This microscopic anisotropy appears directly in the optical properties of the system. This chapter discusses the propagation of light in such a medium and describes experiments that analyse the transmitted light to obtain information about the microscopic state of the medium. Isotropic atoms The Lorentz–Lorenz model Outline The interaction of electromagnetic radiation with matter, in particular light, has inspired philosophers of nature for many centuries and has led to heated debates like the one between Newton and Goethe. The original interest was with the difference in absorption of various materials as a function of the optical wavelength and with the refraction of light, i.e., its dispersion. The first theoretical analysis that connected these macroscopic effects to microscopic properties of the material was the Lorentz–Lorenz theory of dispersion (Lorentz 1880; Lorenz 1881), which was put forward shortly after the Maxwell equations and published in the year after Maxwell's death. (See Figure 6.1.) This theory models the material as a collection of dipoles, driven by the electromagnetic wave. We give here a brief summary of the theory, since its physical content is still the foundation of today's description although the mathematical formalism has changed significantly.
The differential equation governing, within the paraxial regime, the propagation of an optical field through a medium with variable refractive index is formally identical to the time-dependent Schroedinger equation for a particle in two dimensions. In particular, the wave function of the particle plays the role of the transverse disturbance of the optical field, the potential acts as the modulation of the refractive index, and time evolution is replaced by the propagation along the longitudinal coordinate. An interesting consequence of such analogy is that well known propagation features of light in some media can afford a model for the time evolution of quantum wavefunctions of a particle within the corresponding potential. Finding the stationary states of a given potential, for instance, turns out to be equivalent to finding the propagation modes in a suitably chosen guiding structure. The simplest case is that of an optical beam propagating inside a homogeneous medium and it corresponds to a free particle on a plane evolving in time. Well, the time evolution of the particle wavefunction can be predicted, starting from its expression at the starting time, using a propagator that can be immediately derived from the Fresnel integral. Yet, it is not difficult to conceive, by suitably superposing eigenstates of the energy of the free particle, a wavefunction whose squared modulus does not change with time, in perfect analogy with an optical nondiffracting Bessel beam. A slightly less trivial case is that of the propagation inside an optical fibre having parabolic refractive index. It is known that the modes of such a fibre are Hermite-Gaussian modes, whose width is determined by the parameter governing the refractive index variation. The quantum analog is a two-dimensional harmonic oscillator, whose energy eigenstates are, of course, the same Hermite-Gaussian functions, and this is, actually, even better known. But the optical analogy allows us also to predict behaviors of the quantum particle that are not completely trivial. It is the case, for instance, of a fundamental Gaussian beam that is injected into the fiber off axis. If the width of the Gausian is chosen as that of the propagation modes of the fiber, the beam will propagate inside the fibre without changing its width, but its center will oscillate around the axis of the fiber. This is due to the “lens-like” effect of a fiber with parabolic refractive index. This corresponds to a coherent state of the harmonic oscillator. Due to the same effect, if we inject off-axis a Gaussian beam with a different spot size, then the beam not only oscillates around the axis, but also changes its width, passing periodically from smaller to larger values of the spot size. This corresponds to a squeezed state of the harmonic oscillator. Further significant cases can be considered, such as those pertinent to optical waveguides, that correspond to potential wells for the quantum particle. Even in such cases, classical results concerning the propagation of the optical fields can help to solve analogous quantum problems, as far as the determination of the stationary states and of the energy eigenvalues, and the time evolution of the system is concerned. Finally, starting from the above analogy, a correspondence between partially coherent beams and mixed quantum states can be established. It stems from the equivalence between the cross-spectral density function, defined within the second-order coherence theory, and the density matrix, used to describe quantum mixed states. Results obtained in the field of the partial coherence optics, such as those pertinent to the well-known Gaussian Schell-model sources, can be easily transposed into the quantum realm. Note from Publisher: This article contains the abstract only.
This tutorial gives an overview of the use of the Wigner function as a tool for modeling optical field propagation. Particular emphasis is placed on the spatial propagation of stationary fields, as well as on the propagation of pulses through dispersive media. In the first case, the Wigner function gives a representation of the field that is similar to a radiance or weight distribution for all the rays in the system, since its arguments are both position and direction. In cases in which the field is paraxial and where the system is described by a simple linear relation in the ray regime, the Wigner function is constant under propagation along rays. An equivalent property holds for optical pulse propagation in dispersive media under analogous assumptions. Several properties and applications of the Wigner function in these contexts are discussed, as is its connection with other common phase-space distributions like the ambiguity function, the spectrogram, and the Husimi, P, Q, and Kirkwood–Rihaczek functions. Also discussed are modifications to the definition of the Wigner function that allow extending the property of conservation along paths to a wider range of problems, including nonparaxial field propagation and pulse propagation within general transparent dispersive media.
The modes of nonlinear propagation of the two-component electromagnetic pulses through optically uniaxial media containing resonant particles are studied. The features of their manifestation in the "dense" media and in the media with expressed positive and negative birefringences are discussed. It is shown that exponentially and rationally decreasing solutions of the system of material and wave equations allow us also to describe the propagation of the pulses of the self-induced transparency in isotropic media in the case, when the direct electric dipole-dipole interaction between the resonant particles is taken into account.