Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Recent advances in computational

Analytical Wavefunctions from Quantum Monte Carlo Simulations

Dario Bressanini, Pietro Cremaschi, Massimo Mella, Gabriele Morosi

Published May 1, 1997• 1 citation
Publisher

Abstract

We present a method for extracting analytical wavefunctions for atoms and molecules from the sampling of the exact wavefunction provided by quantum Monte Carlo (QMC) methods. The parameters in the trial wavefunctions are optimized minimizing the total square deviation between the trial and the exact wavefunction. The least squares optimized wavefunction gives energy and other properties in good agreement with the exact values. The optimized wavefunction can be used to compute properties not easily accessible to QMC simulations.

DOI
10.1142/9789812819710_0001

Related papers

Optimization of quantum Monte Carlo wave functions using analytical energy derivatives

Xi Lin, H Zhang, Andrew M. Rappe

Abstract The optimization of parameters in trial wavefunctions by minimizing the variance in local energy was used for some of the earliest variationala and diffusionb QMC calculations, and it has been used ever since by most practitioners of QMC. Perhaps the best known examples are given in the paper by Schmidt and Moskowitzc for optimizing their nine-parameter Jastrow functions for first-row atoms. An alternative method of optimization, leading to lower variational energies for these atoms, is reported in this paper.

Oxford University Press eBooks•Jun 18, 2007•1 citation

Two aspects of quantum monte carlo: Determination of accurate wavefunctions and determination of potential energy surfaces of molecules

Cyrus J. Umrigar

Two aspects of quantum Monte Carlo are discussed. First, we review a procedure for obtaining trial wavefunctions for use in quantum Monte Carlo simulations that have both smaller statistical errors and improved expectation values than commonly used functions. Second, we present a correlated sampling approach for calculating energy differences in variational Monte Carlo much more accurately than the values of the energies. This method is used to calculate the potential energy surfaces of H2 and BH. In the case of BH, at bond lengths 10% different from the reference geometry, the reduced statistical error in the relative energy results in a factor of 3000 saving in computer time.

International Journal of Quantum Chemistry•Jun 19, 2009•34 citations

Quantum Monte Carlo studies of density functional theory

Maziar Nekovee, W. M. C. Foulkes, Richard J. Needs

Abstract It is difficult to imagine that density functional theory (DFT) could be useful in improving quantum Monte Carlo methods, but it is easy to imagine that QMC could be useful in improving density functional methods. Since QMC can produce accurate wavefunctions and since wavefunctions lead to all other properties one should be able, in principle, to use QMC to predict the exchangecorrelation energy functional Exc[n(r)], the key (unknown) quantity required in DFT. In practice, that is not so easy, but this paper shows how QMC can take steps in that direction by providing insights gained from comparisons of results from QMC and DFT. The authors considered the case of the strongly inhomogeneous electron gas using variational Q:tvIC to obtain wavefunctions 1/J>. and energies E[7/J>.] for the ground state of the Hamiltonian iI>- = T +AVee+V >. associated with the coupling constant A in the range 0 to 1. Optimization of a Slater-Jastrow many-body wavefunction was made by minimizing a penalty function given by a weighted sum of the variance in local energies and a sum of squares of electron density differences. The variational parameters in 7/J>. and v>. were repeatedly varied to reach convergence followed by additional calculations to obtain the local values of the exchange-correlation energies e c and the exchange-correlation holes n c from which Exe and nxc could be determined.

Oxford University Press eBooks•Jun 18, 2007•0 citations

Fixed-sample optimization in quantum Monte Carlo using a probability density function

R N Barnett, R N Sun, R N Lester

Abstract The optimization of trial wavefunctions ‘I/Jr for use in QMC calculations can be accomplished with a fixed set of configurations selected with probabilities proportional to ‘1/Jf, often using Metropolis sampling and occasionally using other methods. By varying the coefficients of ‘I/Jr, one can minimize the variance in local energies for the original set of configurations. This is effective except when coefficients affecting the node locations are varied and occasional very high weighting factors ‘I/J}(new)/’1/J}(original) can give large fluctuations in the variance. In this paper, the authors propose the use of probability density functions p to produce nodeless distributions of points replacing the original ‘1/Jf distributions. This has two advantages: it avoids the unbounded weighting problem allowing nodes to be varied, and it facilitates sampling without a Metropolis walk and its associated serial correlation. To be effective, i.e., for high efficiency, p must be carefully selected, it must at least resemble ‘1/Jf, and its distributions must be easily sampled. Tests were performed for the case of CH with optimization of all parameters of a two-determinant-and-Jastrow trial function. These included basis set exponents, MO coefficients, CI coefficient, and SchmidtMoskowitz Jastrow parameters. The resulting variance in local energy was 0.19 h2, versus 0.25 h2 for optimization of the Jastrow coefficients only. More interesting is the improvement in diffusion QMC energy for the complete optimization including node movement. The energy was lowered by 0.004 hartree, or 2.5 kcal/mol, with recovery of correlation energy increased from 92.8 to 94.8%.

Oxford University Press eBooks•Jun 18, 2007•0 citations

Optimization of quantum Monte Carlo wavefunctions using analytical derivatives

Hartmut Bueckert, Stuart M. Rothstein, Jan Vrbik

We show how to optimize many-parameter wavefunctions for use in quantum Monte Carlo by deriving and utilizing formulas for analytical rather than numerical evaluation of the required derivatives. We present these in a form which is easily vectorizable for use on a supercomputer. We also discuss several technical issues of variational Monte Carlo to ensure both an unbiased and efficient optimization. Finally, we illustrate our optimization scheme's numerical performance by optimizing ground-state wavefunctions for LiH and H2O, each with more than 100 variational parameters. Keywords: quantum Monte Carlo, optimization, electron correlation, LiH, H2O.

Canadian Journal of Chemistry•Feb 1, 1992•25 citations

Quantum Monte Carlo Approaches for Tackling Electronic Correlation

Massimo Mella, Gabriele Morosi

Quantum Monte Carlo (QMC) methods sample the wave function, in principle the exact one, instead of optimizing analytical functions as standard ab initio approaches. They have emerged as suitable alternative to ab initio methods to deal with the dynamical correlation in the description of the electronic structure of atoms and molecules. Differently from standard quantum chemistry approaches, QMC enjoys several features that make it the method of choice for complicated systems. Among these features, it is important to notice its intrinsically parallelizable nature, the slow (˜N 3 ) scaling of the computational cost with number of particles N, the limited amount of memory required and its ability to deal with substantially different systems within the same theoretical/algorithmic structure (e.g. it can be easily applied to both bosons and fermions, to the description of systems containing electrons and positrons as well as of vibrational properties of molecules). One of the strongest points characterizing QMC is the fact that it may use any kind of basis sets, albeit uncommon ones, depending on the species. This fact allows QMC either to quickly converge to the exact answer in the case of bosonic systems, or to easily recover 90–95% of the correlation energy in electronic species without the inverse cubic convergence with respect to the size of the basis set that plagues more common ab initio methods. Thanks to these characteristics, different flavours of QMC have been applied to a wide set of species/problems spanning a range that stretches from molecules as small as water up to pieces of bulk matter as large as silicon and germanium crystals and that includes molecules such as porphyrins and C 20 . Despite the strong points highlighted, QMC suffers from a relatively high computational cost mainly due to the necessity of evaluating many times a reference wave function. Thus, a substantial reduction of this cost may come from central processing units (CPU) particularly tailored to compute exponentials, polynomials and rational functions, from better algorithms that require less function evaluations and from variance reduction techniques. Besides, more robust approaches to reduce the so called “nodal error” would help improve the already appreciable accuracy afforded by QMC. With the above issues improved, there are several avenues that would become possible to pursue on a routine basis. Among these, we foresee the calculations of intermolecular interactions for very large systems (e.g. parts of DNA with or without interacting species), the calculation of nuclear magnetic resonance (NMR) parameters for difficult systems, the automatic optimization of molecular structures and, even better, the chance of running molecular dynamics simulation à la Car–Parrinello using QMC computed atomic forces. In these circumstances, the study of phase transitions, bulk matter, interfaces and large biological systems may reach an unexpected level of accuracy that is currently unavailable due to methodological limitations.

IMPERIAL COLLEGE PRESS eBooks•Aug 1, 2011•0 citations
We present a method for extracting analytical wavefunctions for atoms and molecules from the sampling of the exact wavefunction provided by quantum Monte Carlo (QMC) methods. The parameters in the trial wavefunctions are optimized minimizing the total square deviation between the trial and the exact wavefunction. The least squares optimized wavefunction gives energy and other properties in good agreement with the exact values. The optimized wavefunction can be used to compute properties not easily accessible to QMC simulations.
Abstract The optimization of parameters in trial wavefunctions by minimizing the variance in local energy was used for some of the earliest variationala and diffusionb QMC calculations, and it has been used ever since by most practitioners of QMC. Perhaps the best known examples are given in the paper by Schmidt and Moskowitzc for optimizing their nine-parameter Jastrow functions for first-row atoms. An alternative method of optimization, leading to lower variational energies for these atoms, is reported in this paper.
Two aspects of quantum Monte Carlo are discussed. First, we review a procedure for obtaining trial wavefunctions for use in quantum Monte Carlo simulations that have both smaller statistical errors and improved expectation values than commonly used functions. Second, we present a correlated sampling approach for calculating energy differences in variational Monte Carlo much more accurately than the values of the energies. This method is used to calculate the potential energy surfaces of H2 and BH. In the case of BH, at bond lengths 10% different from the reference geometry, the reduced statistical error in the relative energy results in a factor of 3000 saving in computer time.
Abstract It is difficult to imagine that density functional theory (DFT) could be useful in improving quantum Monte Carlo methods, but it is easy to imagine that QMC could be useful in improving density functional methods. Since QMC can produce accurate wavefunctions and since wavefunctions lead to all other properties one should be able, in principle, to use QMC to predict the exchangecorrelation energy functional Exc[n(r)], the key (unknown) quantity required in DFT. In practice, that is not so easy, but this paper shows how QMC can take steps in that direction by providing insights gained from comparisons of results from QMC and DFT. The authors considered the case of the strongly inhomogeneous electron gas using variational Q:tvIC to obtain wavefunctions 1/J>. and energies E[7/J>.] for the ground state of the Hamiltonian iI>- = T +AVee+V >. associated with the coupling constant A in the range 0 to 1. Optimization of a Slater-Jastrow many-body wavefunction was made by minimizing a penalty function given by a weighted sum of the variance in local energies and a sum of squares of electron density differences. The variational parameters in 7/J>. and v>. were repeatedly varied to reach convergence followed by additional calculations to obtain the local values of the exchange-correlation energies e c and the exchange-correlation holes n c from which Exe and nxc could be determined.
Abstract The optimization of trial wavefunctions ‘I/Jr for use in QMC calculations can be accomplished with a fixed set of configurations selected with probabilities proportional to ‘1/Jf, often using Metropolis sampling and occasionally using other methods. By varying the coefficients of ‘I/Jr, one can minimize the variance in local energies for the original set of configurations. This is effective except when coefficients affecting the node locations are varied and occasional very high weighting factors ‘I/J}(new)/’1/J}(original) can give large fluctuations in the variance. In this paper, the authors propose the use of probability density functions p to produce nodeless distributions of points replacing the original ‘1/Jf distributions. This has two advantages: it avoids the unbounded weighting problem allowing nodes to be varied, and it facilitates sampling without a Metropolis walk and its associated serial correlation. To be effective, i.e., for high efficiency, p must be carefully selected, it must at least resemble ‘1/Jf, and its distributions must be easily sampled. Tests were performed for the case of CH with optimization of all parameters of a two-determinant-and-Jastrow trial function. These included basis set exponents, MO coefficients, CI coefficient, and SchmidtMoskowitz Jastrow parameters. The resulting variance in local energy was 0.19 h2, versus 0.25 h2 for optimization of the Jastrow coefficients only. More interesting is the improvement in diffusion QMC energy for the complete optimization including node movement. The energy was lowered by 0.004 hartree, or 2.5 kcal/mol, with recovery of correlation energy increased from 92.8 to 94.8%.
We show how to optimize many-parameter wavefunctions for use in quantum Monte Carlo by deriving and utilizing formulas for analytical rather than numerical evaluation of the required derivatives. We present these in a form which is easily vectorizable for use on a supercomputer. We also discuss several technical issues of variational Monte Carlo to ensure both an unbiased and efficient optimization. Finally, we illustrate our optimization scheme's numerical performance by optimizing ground-state wavefunctions for LiH and H2O, each with more than 100 variational parameters. Keywords: quantum Monte Carlo, optimization, electron correlation, LiH, H2O.
Quantum Monte Carlo (QMC) methods sample the wave function, in principle the exact one, instead of optimizing analytical functions as standard ab initio approaches. They have emerged as suitable alternative to ab initio methods to deal with the dynamical correlation in the description of the electronic structure of atoms and molecules. Differently from standard quantum chemistry approaches, QMC enjoys several features that make it the method of choice for complicated systems. Among these features, it is important to notice its intrinsically parallelizable nature, the slow (˜N 3 ) scaling of the computational cost with number of particles N, the limited amount of memory required and its ability to deal with substantially different systems within the same theoretical/algorithmic structure (e.g. it can be easily applied to both bosons and fermions, to the description of systems containing electrons and positrons as well as of vibrational properties of molecules). One of the strongest points characterizing QMC is the fact that it may use any kind of basis sets, albeit uncommon ones, depending on the species. This fact allows QMC either to quickly converge to the exact answer in the case of bosonic systems, or to easily recover 90–95% of the correlation energy in electronic species without the inverse cubic convergence with respect to the size of the basis set that plagues more common ab initio methods. Thanks to these characteristics, different flavours of QMC have been applied to a wide set of species/problems spanning a range that stretches from molecules as small as water up to pieces of bulk matter as large as silicon and germanium crystals and that includes molecules such as porphyrins and C 20 . Despite the strong points highlighted, QMC suffers from a relatively high computational cost mainly due to the necessity of evaluating many times a reference wave function. Thus, a substantial reduction of this cost may come from central processing units (CPU) particularly tailored to compute exponentials, polynomials and rational functions, from better algorithms that require less function evaluations and from variance reduction techniques. Besides, more robust approaches to reduce the so called “nodal error” would help improve the already appreciable accuracy afforded by QMC. With the above issues improved, there are several avenues that would become possible to pursue on a routine basis. Among these, we foresee the calculations of intermolecular interactions for very large systems (e.g. parts of DNA with or without interacting species), the calculation of nuclear magnetic resonance (NMR) parameters for difficult systems, the automatic optimization of molecular structures and, even better, the chance of running molecular dynamics simulation à la Car–Parrinello using QMC computed atomic forces. In these circumstances, the study of phase transitions, bulk matter, interfaces and large biological systems may reach an unexpected level of accuracy that is currently unavailable due to methodological limitations.