Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE International Symposium on Multiple-Valued Logic (ISMVL)

Nearest-Neighbor and Fault-Tolerant Quantum Circuit Implementation

Laxmidhar Biswal, Chandan Bandyopadhyay, Anupam Chattopadhyay, Robert Wille, Rolf Drechsler, Hafizur Rahaman

Published May 1, 2016• 18 citations
Publisher

Abstract

The quest of achieving higher computing performance is driving the research on quantum computing, which is reporting new milestones almost on a daily basis. For practical quantum circuit design, fault tolerance is an essential condition. This is achieved by mapping the target functions into the Clifford+T group of elementary quantum gates. Furthermore, the application of error-correcting codes in quantum circuits requires the quantum gates to be formed between adjacent Qubits. In this work, we improve the state-of-the-art quantum circuit design by addressing both of the above challenges. First, we propose a novel mapping of Multiple-Control Toffoli (MCT) gates to Clifford+T group gates, which achieves lower gate count compared to earlier work. Secondly, we show a generic way to convert any Clifford+T circuit into a nearest neighbor one. We validate the efficacy of our approach with detailed experimental studies.

DOI
10.1109/ismvl.2016.48

Related papers

T-depth Optimization for Fault-Tolerant Quantum Circuits

Philipp Niemann, Anshu Gupta, Rolf Drechsler

The Clifford+T gate library consisting of Hadamard, T, and CNOT gates has attracted much interest in quantum circuit synthesis, particularly due to its applicability to fault tolerant realizations. Since fault tolerant implementations of the T gate have very high latency, recent work in this area is aiming at minimizing the number of T stages, referred to as the T-depth. In this paper, we present an approach to exploit additional ancilla qubits in the mapping of reversible circuits consistina of multiple controlled Toffoli gates (MCT gates) into califford+T quantum circuits, with the primary optimization objective to minimize the T-depth. Our proposed approach takes advantage of and generalizes earlier work on corresponding mapping algorithms. An experimental evaluation shows that our approach leads to a significant T-depth reduction compared to earlier approaches.

IEEE International Symposium on Multiple-Valued Logic (ISMVL)•May 1, 2019•23 citations

The Optimization and Application of 3-Bit Hermitian Gates and Multiple Control Toffoli Gates

Hai-Sheng Li

The well-known 3-bit Hermitian gate (a Toffoli gate) has been implemented using Clifford + T circuits. Compared with the Peres gate, its implementation circuit requires more controlled-NOT (CNOT) gates. However, the Peres gate is not Hermitian. This paper reports four 3-bit Hermitian gates named LI gates. Whose realized circuits have the same T-count, T-depth, and CNOT-count as the Peres gate. Furthermore, two decomposition methods of a multiple control Toffoli (MCT) gate are proposed for different primary optimization goals. Then, we design the equality, less-than, and full comparators with the minimum circuit width using proposed Hermitian gates and optimized MCT gates. A fault-tolerant circuit is required for robust quantum computing. Clifford+T circuits are accepted solutions for fault-tolerant implementation. Considering T-count, T-depth, CNOT-count, and circuit width as the primary optimization goals, we design the optimized Clifford + T circuits of three comparators using LI gates and optimized MCT gates. Comparison and analysis show that the proposed comparators have better overall performances for T-count, T-depth, CNOT-count, and circuit width than the best-known comparators without quantum measurements.

IEEE Transactions on Quantum Engineering•Jan 1, 2022•6 citations

Models of fault-tolerant quantum computation

Christopher M. Dawson

This thesis is concerned with certain theoretical problems that arise naturally in the context of fault-tolerant quantum computation. Fault-tolerance can be defined as the art of building reliable devices from unreliable components, and is of particular importance for quantum computers that aim to precisely control the dynamics of extremely sensitive quantum systems. A model of quantum computation is a specification of the basic building blocks by which a quantum computation is implemented. The best known model is the quantum circuit model, where computations are implemented by means of unitary quantum gates that are applied to two-level quantum systems known as qubits. In a physical implementation of a quantum circuit, the gates and qubits will inevitably be affected by noise. Fault-tolerant quantum circuits are designed to be resilient against the effects of this noise, provided that it is not too strong. Fault-tolerance in the quantum circuit model is well developed thanks to the theory of quantum error-correcting codes. These codes allow for the correction of small numbers of errors introduced by a variety of noise processes. In a fault-tolerant quantum circuit, qubits are replaced with encoded qubits, and quantum gates with encoded gates that are immediately followed by special quantum circuits for error correction. Provided the rate at which errors occur is below a constant threshold value, the accumulation of errors can be checked so that the correct output of the computation correctly determined. The threshold acts as both a measure of how good the design of a quantum circuit is, and also as a target for experimenters aiming to implement quantum circuits. Much current research in quantum computation is aimed at designing quantum circuits that increase the noise threshold, hopefully to the point where it becomes within the reach of experimenters. A fault-tolerant encoded quantum gate must limit the propagation of errors so that the code’s corrective capabilities are not overwhelmed. It is not so easy to design encoded gates that satisfy this property, and to date only a finite handful of such gates are known. In a faulttolerant quantum circuit, all quantum gates must be decomposed or compiled in terms of those that may be implemented fault-tolerantly. In the first part of this thesis, we present two results that may be applied to this problem of gate compilation. The first is a generic method based on the Solovay-Kitaev theorem that may be applied to all quantum gates, but is most effective for those that act on single qubits. We present the Solovay-Kitaev theorem in its simples known form as an algorithm, together with novel constructions that can be used to implement it. Following this we give a two specialized methods for two-qubit gate decomposition, based on the Cartan decomposition of the Lie group SU(4). The cluster-state model of computation is an alternative to the quantum circuit model, and makes use of quantum measurements and highly entangled cluster-states to implement a quantum computation. The fault-tolerant techniques developed for quantum circuits are not immediately applicable in this model, so in order for it to be a realistic candidate for performing computations we prove that such techniques are possible. In the second part of the thesis we prove that constant fault-tolerance thresholds may be achieved in the cluster-state model, and in particular in an adaption to an optical implementation. Following this we design a complete error correction scheme for optical cluster-state computation, and numerically determine the threshold of this model in the face of the dominant noise models likely to affect such an implementation.

•Jan 1, 2006•0 citations

An Efficient 2D Mapping of Quantum Circuits to Nearest Neighbor Designs

Anirban Bhattacharjee, Hafizur Rahaman

In the last few years, tremendous improvement in the field of quantum computing has been witnessed. Although quantum technologies such as ion-trap, NMR, quantum dots have emerged as the promising platforms for implementing quantum circuits but these technologies have faced several design issues. One such important design problem is the nearest neighbor condition, which requires the qubits to interact with adjacent neighbors. This problem can be addressed by adding SWAP gates in the circuit. By doing so, the overhead in the circuit increases thus NN designs with minimum number of SWAP gates need to be developed. Focusing on this, here, in this work, we introduce a heuristic design method for efficient NN realization of quantum circuits in 2D architecture. Our NN transformation process is carried out in two phases, where initially in the first phase, the input circuit is mapped to 2D configuration using a qubit placement strategy and then in the second phase NN designs are obtained through SWAP gate insertion. At the end, the design algorithm has been evaluated over a large set of benchmark functions and the results are compared with some of the existing works. From this comparison, it is seen that our proposed method performs better than the reported works.

IEEE International Symposium on Smart Electronic Systems (iSES)•Dec 1, 2021•2 citations

A Novel 2D Mapping Scheme for Nearest Neighbor Design of Quantum Circuits

Subham Kumar, Anirban Bhattacharjee, Sudip Ghosh +1 more

In the last few years, quantum computing has gained the attention of the researchers due to its ability to perform parallel and exponentially faster computation over classical computing. One of the prominent challenges for quantum circuits is to satisfy the nearest neighbor (NN) condition, i.e., the qubits of the computing gate must be placed adjacent. Based on this fact, here, in this paper, we have proposed a heuristic synthesis workflow to realize NN circuits in 2D grid configuration. The implemented approach has been evaluated over a broad range of benchmark circuits and we have reported the best results. To validate the efficiency of the stated approach, we have compared it with the previously reported works, an average improvement of 15.94%, 8.89% and 10.98% are obtained over the existing 2D works, and 44.72% and 70.35% are obtained over existing 1D works, respectively.

IEEE International Conference of Electron Devices Society Kolkata Chapter (EDKCON)•Nov 26, 2022•2 citations

Efficient T-Count Fault-tolerant Quantum Clifford+T Multiplexer

Negin Mashayekhi, Shekoofeh Moghimi, Mohammad Reza Reshadinezhad

Reversible logic is essential in quantum computing due to its ability to preserve information and establish a one-to-one mapping between inputs and outputs. The Clifford+T gate set, known for supporting fault-tolerant quantum circuits, offers resilience against decoherence but introduces high implementation costs, particularly due to the T gate's resource intensity. In this work, we propose a new and efficient quantum multiplexer design, the Quantum Clifford T-MUX, designed entirely within the Clifford+T framework. This multiplexer minimizes T-count and avoids the use of ancillary qubits, both critical factors for practical, fault-tolerant quantum computing. As part of this architecture, we present a newly designed fault-tolerant Peres gate using only Clifford+T gates, which serves as a fundamental building block in the T-MUX construction. The proposed T-MUX achieves reduced T-count, no garbage output, and improved efficiency compared to traditional designs. These improvements position it as a valuable component for building scalable quantum Arithmetic Logic Units (ALUs), data buses, and memory systems. Overall, this work contributes toward the development of low-overhead, modular quantum control structures suited for near-term and long-term quantum computing architectures. The proposed circuit is simulated using the Quirk online tool, and the result confirms the accuracy of the design. This design achieves an average 35% improvement in T-Count without any constant input, compared to its counterpart, respectively.

International Conference on Computer and Knowledge Engineering•Oct 28, 2025•0 citations
The quest of achieving higher computing performance is driving the research on quantum computing, which is reporting new milestones almost on a daily basis. For practical quantum circuit design, fault tolerance is an essential condition. This is achieved by mapping the target functions into the Clifford+T group of elementary quantum gates. Furthermore, the application of error-correcting codes in quantum circuits requires the quantum gates to be formed between adjacent Qubits. In this work, we improve the state-of-the-art quantum circuit design by addressing both of the above challenges. First, we propose a novel mapping of Multiple-Control Toffoli (MCT) gates to Clifford+T group gates, which achieves lower gate count compared to earlier work. Secondly, we show a generic way to convert any Clifford+T circuit into a nearest neighbor one. We validate the efficacy of our approach with detailed experimental studies.
The Clifford+T gate library consisting of Hadamard, T, and CNOT gates has attracted much interest in quantum circuit synthesis, particularly due to its applicability to fault tolerant realizations. Since fault tolerant implementations of the T gate have very high latency, recent work in this area is aiming at minimizing the number of T stages, referred to as the T-depth. In this paper, we present an approach to exploit additional ancilla qubits in the mapping of reversible circuits consistina of multiple controlled Toffoli gates (MCT gates) into califford+T quantum circuits, with the primary optimization objective to minimize the T-depth. Our proposed approach takes advantage of and generalizes earlier work on corresponding mapping algorithms. An experimental evaluation shows that our approach leads to a significant T-depth reduction compared to earlier approaches.
The well-known 3-bit Hermitian gate (a Toffoli gate) has been implemented using Clifford + T circuits. Compared with the Peres gate, its implementation circuit requires more controlled-NOT (CNOT) gates. However, the Peres gate is not Hermitian. This paper reports four 3-bit Hermitian gates named LI gates. Whose realized circuits have the same T-count, T-depth, and CNOT-count as the Peres gate. Furthermore, two decomposition methods of a multiple control Toffoli (MCT) gate are proposed for different primary optimization goals. Then, we design the equality, less-than, and full comparators with the minimum circuit width using proposed Hermitian gates and optimized MCT gates. A fault-tolerant circuit is required for robust quantum computing. Clifford+T circuits are accepted solutions for fault-tolerant implementation. Considering T-count, T-depth, CNOT-count, and circuit width as the primary optimization goals, we design the optimized Clifford + T circuits of three comparators using LI gates and optimized MCT gates. Comparison and analysis show that the proposed comparators have better overall performances for T-count, T-depth, CNOT-count, and circuit width than the best-known comparators without quantum measurements.
This thesis is concerned with certain theoretical problems that arise naturally in the context of fault-tolerant quantum computation. Fault-tolerance can be defined as the art of building reliable devices from unreliable components, and is of particular importance for quantum computers that aim to precisely control the dynamics of extremely sensitive quantum systems. A model of quantum computation is a specification of the basic building blocks by which a quantum computation is implemented. The best known model is the quantum circuit model, where computations are implemented by means of unitary quantum gates that are applied to two-level quantum systems known as qubits. In a physical implementation of a quantum circuit, the gates and qubits will inevitably be affected by noise. Fault-tolerant quantum circuits are designed to be resilient against the effects of this noise, provided that it is not too strong. Fault-tolerance in the quantum circuit model is well developed thanks to the theory of quantum error-correcting codes. These codes allow for the correction of small numbers of errors introduced by a variety of noise processes. In a fault-tolerant quantum circuit, qubits are replaced with encoded qubits, and quantum gates with encoded gates that are immediately followed by special quantum circuits for error correction. Provided the rate at which errors occur is below a constant threshold value, the accumulation of errors can be checked so that the correct output of the computation correctly determined. The threshold acts as both a measure of how good the design of a quantum circuit is, and also as a target for experimenters aiming to implement quantum circuits. Much current research in quantum computation is aimed at designing quantum circuits that increase the noise threshold, hopefully to the point where it becomes within the reach of experimenters. A fault-tolerant encoded quantum gate must limit the propagation of errors so that the code’s corrective capabilities are not overwhelmed. It is not so easy to design encoded gates that satisfy this property, and to date only a finite handful of such gates are known. In a faulttolerant quantum circuit, all quantum gates must be decomposed or compiled in terms of those that may be implemented fault-tolerantly. In the first part of this thesis, we present two results that may be applied to this problem of gate compilation. The first is a generic method based on the Solovay-Kitaev theorem that may be applied to all quantum gates, but is most effective for those that act on single qubits. We present the Solovay-Kitaev theorem in its simples known form as an algorithm, together with novel constructions that can be used to implement it. Following this we give a two specialized methods for two-qubit gate decomposition, based on the Cartan decomposition of the Lie group SU(4). The cluster-state model of computation is an alternative to the quantum circuit model, and makes use of quantum measurements and highly entangled cluster-states to implement a quantum computation. The fault-tolerant techniques developed for quantum circuits are not immediately applicable in this model, so in order for it to be a realistic candidate for performing computations we prove that such techniques are possible. In the second part of the thesis we prove that constant fault-tolerance thresholds may be achieved in the cluster-state model, and in particular in an adaption to an optical implementation. Following this we design a complete error correction scheme for optical cluster-state computation, and numerically determine the threshold of this model in the face of the dominant noise models likely to affect such an implementation.
In the last few years, tremendous improvement in the field of quantum computing has been witnessed. Although quantum technologies such as ion-trap, NMR, quantum dots have emerged as the promising platforms for implementing quantum circuits but these technologies have faced several design issues. One such important design problem is the nearest neighbor condition, which requires the qubits to interact with adjacent neighbors. This problem can be addressed by adding SWAP gates in the circuit. By doing so, the overhead in the circuit increases thus NN designs with minimum number of SWAP gates need to be developed. Focusing on this, here, in this work, we introduce a heuristic design method for efficient NN realization of quantum circuits in 2D architecture. Our NN transformation process is carried out in two phases, where initially in the first phase, the input circuit is mapped to 2D configuration using a qubit placement strategy and then in the second phase NN designs are obtained through SWAP gate insertion. At the end, the design algorithm has been evaluated over a large set of benchmark functions and the results are compared with some of the existing works. From this comparison, it is seen that our proposed method performs better than the reported works.
In the last few years, quantum computing has gained the attention of the researchers due to its ability to perform parallel and exponentially faster computation over classical computing. One of the prominent challenges for quantum circuits is to satisfy the nearest neighbor (NN) condition, i.e., the qubits of the computing gate must be placed adjacent. Based on this fact, here, in this paper, we have proposed a heuristic synthesis workflow to realize NN circuits in 2D grid configuration. The implemented approach has been evaluated over a broad range of benchmark circuits and we have reported the best results. To validate the efficiency of the stated approach, we have compared it with the previously reported works, an average improvement of 15.94%, 8.89% and 10.98% are obtained over the existing 2D works, and 44.72% and 70.35% are obtained over existing 1D works, respectively.
Reversible logic is essential in quantum computing due to its ability to preserve information and establish a one-to-one mapping between inputs and outputs. The Clifford+T gate set, known for supporting fault-tolerant quantum circuits, offers resilience against decoherence but introduces high implementation costs, particularly due to the T gate's resource intensity. In this work, we propose a new and efficient quantum multiplexer design, the Quantum Clifford T-MUX, designed entirely within the Clifford+T framework. This multiplexer minimizes T-count and avoids the use of ancillary qubits, both critical factors for practical, fault-tolerant quantum computing. As part of this architecture, we present a newly designed fault-tolerant Peres gate using only Clifford+T gates, which serves as a fundamental building block in the T-MUX construction. The proposed T-MUX achieves reduced T-count, no garbage output, and improved efficiency compared to traditional designs. These improvements position it as a valuable component for building scalable quantum Arithmetic Logic Units (ALUs), data buses, and memory systems. Overall, this work contributes toward the development of low-overhead, modular quantum control structures suited for near-term and long-term quantum computing architectures. The proposed circuit is simulated using the Quirk online tool, and the result confirms the accuracy of the design. This design achieves an average 35% improvement in T-Count without any constant input, compared to its counterpart, respectively.