We present a methodology to search for harmful subgraphs in the Tanner graph of a regular column-weightthree low-density parity-check (LDPC) code. These harmful subgraphs, which are more commonly known under the name “trapping sets,” cause a degradation in the error correcting performance of LDPC codes in the high signal-to-noise ratio (SNR) region. Our method of searching for trapping sets utilizes the Trapping Set Ontology, a database in which trapping sets are arranged according to their topological relationships. Based on the topological relationships, larger trapping sets are searched for by expanding smaller ones. This reduces the complexity and the run-times of the search algorithms and allows large trapping sets to be searched for efficiently. Besides, if the LDPC code is quasi-cyclic then our search algorithms can be futher simplified. Our method of searching for trapping sets is useful in the performance analysis of LDPC codes and in the construction of good LDPC codes. In this paper, we demonstrate the use of the method in the construction of good LDPC codes.
We present a methodology to search for harmful subgraphs in the Tanner graph of a regular column-weightthree low-density parity-check (LDPC) code. These harmful subgraphs, which are more commonly known under the name “trapping sets,” cause a degradation in the error correcting performance of LDPC codes in the high signal-to-noise ratio (SNR) region. Our method of searching for trapping sets utilizes the Trapping Set Ontology, a database in which trapping sets are arranged according to their topological relationships. Based on the topological relationships, larger trapping sets are searched for by expanding smaller ones. This reduces the complexity and the run-times of the search algorithms and allows large trapping sets to be searched for efficiently. Besides, if the LDPC code is quasi-cyclic then our search algorithms can be futher simplified. Our method of searching for trapping sets is useful in the performance analysis of LDPC codes and in the construction of good LDPC codes. In this paper, we demonstrate the use of the method in the construction of good LDPC codes.
In this thesis, we propose a systematic design of binary protograph-based quasi-cyclic (QC) low-density parity-check (LDPC) codes with low error floor.We first characterize the trapping sets of such codes and demonstrate, using edge coloring techniques, that the QC structure of the code eliminates some of the trapping set structures that can exist in a code with the same degree distribution and girth but lacking the QC structure.Based on this characterization, our design aims at eliminating a targeted collection of trapping sets.Considering the parent/child relationship between the structures of the collection, we search for and eliminate those trapping sets that are in the collection but are not a child of any other trapping set in the collection.An efficient layered algorithm is designed for the search of these targeted trapping sets.Compared to the existing codes in the literature, the designed codes are superior in the sense that they are free of the same collection of trapping sets while having a smaller block length, or a larger collection of trapping sets while having the same block length.In addition, the efficiency of the search algorithm makes it possible to design codes with larger degrees which are free of trapping sets within larger ranges compared to the state-of-the-art.Moreover, we design finite-length binary irregular protograph-based QC-LDPC codes with good waterfall performance and low error floor.To achieve a low error floor, we eliminate a targeted set of dominant elementary trapping sets (ETS) L in the Tanner graph of the code.This is a more challenging task since the variety of problematic structures is much larger than that of regular codes.For a given rate and girth, the codes are designed to be free of the largest set of problematic ETSs for a given block length, or to have the shortest block length while a given set of ETSs is avoided.The design is based on a search algorithm that identifies whether any instance of any structure within L exists in the Tanner graph of the constructed code or not.The search algorithm performs this task with minimal complexity, making it feasible to construct practical codes by running the search algorithm a large numberiiiFirst, I would like to thank my supervisor, Professor Amir H. Banihashemi for leading and encouraging me during my research.His guidance helped me in all the time of research and writing of this thesis.Thanks must also go to my committee members for their helpful suggestions and discussions.I can not express my appreciation to my wonderful wife, Arefeh who devoted her never ending love to me and was my partner towards success.I also appreciate the love and support of my family,
Error correcting codes are used in virtually all communication systems to ensure reliable transmission of information. In 1948, Shannon established an upper-bound on the maximum rate at which information can be transmitted reliably over a noisy channel. Reliably transmitting information with a rate close to this theoretical limit, known as the channel capacity, has been the goal of channel coding scientists for the last five decades. The rediscovery of low-density parity-check (LDPC) codes in the 1990s added much-renewed excitement in the coding community. LDPC codes are interesting because they can approach channel capacity under sub-optimum decoding algorithms whose complexity is linear in the code length. Unsurprisingly, LDPC codes quickly attained their popularity in practical applications such as magnetic storage, wireless and optical communications. One, if not the most, important and challenging problem in LDPC code research is the study and analysis of the error floor phenomenon. This phenomenon is described as an abrupt degradation in the frame error rate performance of LDPC codes in the high signal-to-noise ratio region. Error floor is harmful because its presence prevents the LDPC decoder from reaching very low probability of decoding failure, an important requirement for many applications. Not long after the rediscovery of LDPC codes, scientists established that error floor is caused by certain harmful structures, most commonly known as trapping sets, in the Tanner representation of a code. Since then, the study of error floor mostly consists of three major problems: 1) estimating error floor; 2) constructing LDPC codes with low error floor and 3) designing decoders that are less susceptible to error floor. Although some parts of this dissertation can be used as important elements in error floor estimation, our main contributions are a novel method for constructing LDPC codes with low error floor and a novel class of low complexity decoding algorithms that can collectively alleviate error floor. These contributions are summarized as follows. A method to construct LDPC codes with low error floors on the binary symmetric channel is presented. Codes are constructed so that their Tanner graphs are free of certain small trapping sets. These trapping sets are selected from the Trapping Set Ontology for the Gallager A/B decoder. They are selected based on their relative harmfulness for a given decoding algorithm. We evaluate the relative harmfulness of different trapping sets for the sum-product algorithm by using the topological relations among them and by analyzing the decoding failures on one trapping set in the presence or absence of other trapping sets. We apply this method to construct structured LDPC codes. To facilitate the discussion, we give a new description of structured LDPC codes whose parity-check matrices are arrays of permutation matrices. This description uses Latin squares to define a set of permutation matrices that have disjoint support and to derive a simple necessary and sufficient condition for the Tanner graph of a code to be free of four-cycles. A new class of bit flipping algorithms for LDPC codes over the binary symmetric channel is proposed. Compared to the regular (parallel or serial) bit flipping algorithms, the proposed algorithms employ one additional bit at a variable node to represent its "strength." The introduction of this additional bit allows an increase in the guaranteed error correction capability. An additional bit is also employed at a check node to capture information which is beneficial to decoding. A framework for failure analysis and selection of two-bit bit flipping algorithms is provided. The main component of this framework is the (re)definition of trapping sets, which are the most "compact" Tanner graphs that cause decoding failures of an algorithm. A recursive procedure to enumerate trapping sets is described. This procedure is the basis for selecting a collection of algorithms that work well together. It is demonstrated that decoders which employ a properly selected group of the proposed algorithms operating in parallel can offer high speed and low error floor decoding.
The error correction performance of low-density parity-check codes under iterative message-passing decoding is degraded by the presence of certain harmful objects existing in their Tanner graph representation. Depending on the context, such harmful objects are known as stopping sets, trapping sets, absorbing sets, or pseudocodewords. In this paper, we propose a general procedure, based on edge spreading, that enables the design of good quasi-cyclic spatially coupled low-density parity-check codes. These codes are derived from quasi-cyclic low-density parity-check (QC-LDPC) block codes and possess a significantly reduced multiplicity of harmful objects with respect to the original QC-LDPC block codes. The proposed procedure relies on a novel algorithm that greedily spans the search space of potential candidates to reduce the multiplicity of the target harmful objects. The effectiveness of the method is validated via examples and numerical computer simulations.
In this article, we design finite-length irregular protograph-based quasi-cyclic (QC) low-density parity-check (LDPC) codes with good waterfall performance and low error floor. To achieve a low error floor, we eliminate a targeted set of dominant elementary trapping sets (ETS) £ in the Tanner graph of the code. For a given rate and girth, the codes are designed to be free of the largest set of problematic ETSs for a given block length, or to have the shortest block length while a given set of ETSs is avoided. The design is based on a search algorithm that identifies whether any instance of any structure within £ exists in the Tanner graph of the constructed code or not. The search algorithm performs this task with minimal complexity, making it feasible to construct practical codes by running the search algorithm a large number of times. Simulation results are provided to demonstrate the superior performance of designed codes compared to similar state-of-the-art irregular QC-LDPC codes.
In this paper, we present an algorithm to find all low-weight codewords in a given quasi-cyclic (QC) low-density parity-check (LDPC) code with a fixed column-weight and girth. The main idea is to view a low-weight codeword as an (a, 0) trapping sets, and then show that each topologically different (a, 0) trapping set can be dissected into smaller trapping sets. The proposed search method relies on the knowledge of possible topologies of such smaller trapping sets present in a code ensemble, which enables an efficient search. Combined with the high-rate QC LDPC code construction which successively adds blocks of permutation matrices, the algorithm ensures that in the code construction procedure all codewords up to a certain weight are avoided, which leads to a code with the desired minimum distance. The algorithm can be also used to determine the multiplicity of the low-weight codewords with different trapping set structure.
We present a method to construct low-density parity-check (LDPC) codes with low error floors on the binary symmetric channel. Codes are constructed so that their Tanner graphs are free of certain small trapping sets. These trapping sets are selected from the trapping set ontology for the Gallager A/B decoder. They are selected based on their relative harmfulness for a given decoding algorithm. We evaluate the relative harmfulness of different trapping sets for the sum–product algorithm by using the topological relations among them and by analyzing the decoding failures on one trapping set in the presence or absence of other trapping sets. We apply this method to construct structured LDPC codes. To facilitate the discussion, we give a new description of structured LDPC codes whose parity-check matrices are arrays of permutation matrices. This description uses Latin squares to define a set of permutation matrices that have disjoint support and to derive a simple necessary and sufficient condition for the Tanner graph of a code to be free of four cycles.