Al/AlOx/Al Josephson junctions are the building blocks of a wide range of superconducting quantum devices that are key elements for quantum computers, extremely sensitive magnetometers and radiation detectors. The properties of the junctions and the superconducting quantum devices are determined by the atomic structure of the tunnel barrier. The nanoscale dimension and disordered nature of the barrier oxide have been challenges for the direct experimental investigation of the atomic structure of the tunnel barrier. Here we show that the miniaturized dimension of the barrier and the interfacial interaction between crystalline Al and amorphous AlOx give rise to oxygen deficiency at the metal/oxide interfaces. In the interior of the barrier, the oxide resembles the atomic structure of bulk aluminium oxide. Atomic defects such as oxygen vacancies at the interfaces can be the origin of the two-level systems and contribute to decoherence and noise in superconducting quantum circuits.
Al/AlOx/Al Josephson junctions are the building blocks of a wide range of superconducting quantum devices that are key elements for quantum computers, extremely sensitive magnetometers and radiation detectors. The properties of the junctions and the superconducting quantum devices are determined by the atomic structure of the tunnel barrier. The nanoscale dimension and disordered nature of the barrier oxide have been challenges for the direct experimental investigation of the atomic structure of the tunnel barrier. Here we show that the miniaturized dimension of the barrier and the interfacial interaction between crystalline Al and amorphous AlOx give rise to oxygen deficiency at the metal/oxide interfaces. In the interior of the barrier, the oxide resembles the atomic structure of bulk aluminium oxide. Atomic defects such as oxygen vacancies at the interfaces can be the origin of the two-level systems and contribute to decoherence and noise in superconducting quantum circuits.
The Josephson energy EJ is a key parameter governing the properties of transmon superconducting qubits. In Al/AlOx/Al junctions, EJ is set by electron tunneling through an ultrathin oxide barrier and therefore depends exponentially on the atomic structure of the barrier. We compute EJ by first-principles device modeling based on the NEGF-DFT quantum-transport method, comparing a junction with a crystalline Al2O3 barrier against ten junctions with melt--quenched amorphous Al2O3 barriers of the same thickness. From the Fermi-level transmission and the Ambegaokar--Baratoff relation, we obtain a mean EJ/h of 2.78 GHz for the amorphous ensemble, with a standard deviation of 4.67 GHz, compared with 0.73 GHz for the crystalline reference; individual amorphous values span nearly two orders of magnitude. Scattering-state analysis shows that transport is quantum tunneling and that the variability originates from stoichiometric inhomogeneity of the amorphous oxide: Al-rich, low-barrier regions can connect into percolation-like tunneling pathways that strongly enhance the conductance. A realistic 200×200 nm2 junction self-averages over more than 2×104 such microscopic regions. These results establish a quantitative atomistic route from oxide microstructure to the superconducting-circuit energy scale EJ.
Superconducting quantum circuits are promising platforms for scalable quantum computing, where qubit coherence is critically determined by microscopic defects in the oxide tunneling barrier of Josephson junctions. Amorphous Al2O3 is widely used as a barrier material, but under irradiation, oxygen vacancy (VO) defects are readily generated, introducing noise sources that accelerate qubit decoherence. We systematically investigate the structural characteristics and electronic impact of VO defects in amorphous Al2O3 using first-principles calculations and \textit{ab initio} molecular dynamics. Our results show that both the coordination environment and concentration of VOs strongly influence electrical conductivity. In particular, two- and three-coordinated VOs, unique to the amorphous structure, enhance conductivity more than conventional four-coordinated vacancies. Increasing VO concentration amplifies conductivity fluctuations, which we link to critical current noise in Josephson junctions. Using a noise model, we estimate that higher VO densities lead to shorter qubit coherence times. These findings provide insights for radiation-hard design of superconducting quantum devices.
Decoherence remains a critical obstacle to achieving high-fidelity, scalable superconducting qubits, with the tunnel barrier of Josephson junctions a key source of loss, yet the microscopic structure of this buried layer has remained difficult to probe experimentally. Here, we use resonant x-ray reflectivity to resolve the coordination environments within the AlO x barrier of Al / AlO x / Al Josephson junctions as a function of oxidation conditions. We find that the barrier coordination evolves from more tetrahedral toward octahedral character with increasing oxidation pressure, while the lower metal-oxide interface is comparatively undercoordinated and disordered relative to the upper interface. Comparison with simulated x-ray absorption spectra identifies the dominant coordination motifs within the oxide and at its interfaces, providing depth-resolved structural insight that informs microscopic models of two-level system formation. These results link growth conditions, local coordination environments, and junction electronic properties, providing a materials-level foundation for interpreting how the tunnel barrier influences coherence in superconducting qubits.
Abstract This work is concerned with Al/Al-oxide(AlOx)/Al-layer systems which are important for Josephson-junction-based superconducting devices such as quantum bits. The device performance is limited by noise, which has been to a large degree assigned to the presence and properties of two-level tunneling systems in the amorphous AlOx tunnel barrier. The study is focused on the correlation of the fabrication conditions, nanostructural and nanochemical properties and the occurrence of two-level tunneling systems with particular emphasis on the AlOx-layer. Electron-beam evaporation with two different processes and sputter deposition were used for structure fabrication, and the effect of illumination by ultraviolet light during Al-oxide formation is elucidated. Characterization was performed by analytical transmission electron microscopy and low-temperature dielectric measurements. We show that the fabrication conditions have a strong impact on the nanostructural and nanochemical properties of the layer systems and the properties of two-level tunneling systems. Based on the understanding of the observed structural characteristics, routes are suggested towards the fabrication of Al/AlOx/Al-layers systems with improved properties.
Josephson junctions are the key components used in superconducting qubits for quantum computing. The advancement of quantum computing is limited by a lack of stability and reproducibility of qubits, which ultimately originates in the amorphous tunnel barrier of the Josephson junctions and other material imperfections. Pinholes in the junction have been suggested as one of the possible contributors to these instabilities, but evidence of their existence and the effect they might have on transport is unclear. We use molecular dynamics to create three-dimensional atomistic models to describe $\mathrm{Al}\text{\ensuremath{-}}{\mathrm{AlO}}_{x}\text{\ensuremath{-}}\mathrm{Al}$ tunnel junctions, showing that pinholes form when oxidation of the barrier is incomplete. Following this, we use the atomistic model and simulate the electronic transport properties for tunnel junctions with different barrier thicknesses using the nonequilibrium Green's function formalism. We observe that pinholes may contribute to excess quasiparticle current flow in $\mathrm{Al}\text{\ensuremath{-}}{\mathrm{AlO}}_{x}\text{\ensuremath{-}}\mathrm{Al}$ tunnel junctions with thinner barriers, and in thicker barriers we observe weak-points that facilitate leakage currents even when the oxide is continuous. We find that the disordered nature of the amorphous barrier results in significant variations in the transport properties. Additionally, we determine the current-phase relationship for our atomistic structures, confirming that devices with pinholes and weak-points cause a deviation from the ideal sinusoidal Josephson relationship.
Hydrogen contamination in Josephson junctions may contribute to device-to-device variability in superconducting qubits, yet its incorporation, location, and bonding in tunnel barriers remain poorly understood. We combine molecular dynamics simulations of aluminum oxidation in dense O2 and H2O environments with atomistic quantum transport calculations. The simulations produce amorphous AlOx barriers with experimentally relevant hydrogen concentrations. Analysis of 400 statistically independent samples shows that the number of incorporated H atoms follows a beta-binomial distribution, reflecting correlations arising from self-limiting oxidation. Most H atoms reside near the AlOx surface, primarily in Al-OH and Al-OH-Al motifs. Quantum transport calculations for Al/Al2O3/Al junctions reveal that hydrogen enhances transmission near the Fermi level by creating an interface dipole that shifts the oxide bands relative to the electrode Fermi level. Combining hydrogen-number statistics with calculated transmission coefficients yields a probability distribution for the Josephson energy. At an average hydrogen content of 2.56 at.%, we predict E_J/h = 10.23 GHz with a standard deviation of 3.6 MHz. Hydrogen shifts the mean Josephson energy by approximately 11%, proportionally to its concentration, but contributes far less to device-to-device variability than observed in state-of-the-art fabricated junctions. These findings provide an atomistic understanding of hydrogen incorporation and its impact on Josephson energy.