Quantum annealing (QA) serves as a specialized optimizer that is able to solve many NP-hard problems and that is believed to have a theoretical advantage over simulated annealing (SA) via quantum tunneling. With the introduction of the D-Wave programmable quantum annealer, a considerable amount of effort has been devoted to detect and quantify quantum speedup. While the debate over speedup remains inconclusive as of now, instead of attempting to show general quantum advantage, here, we focus on a novel real-world application of D-Wave in wireless networking-more specifically, the scheduling of the activation of the air-links for maximum throughput subject to interference avoidance near network nodes. In addition, D-Wave implementation is made error insensitive by a novel Hamiltonian extra penalty weight adjustment that enlarges the gap and substantially reduces the occurrence of interference violations resulting from inevitable spin bias and coupling errors. The major result of this paper is that quantum annealing benefits more than simulated annealing from this gap expansion process, both in terms of ST99 speedup and network queue occupancy. It is the hope that this could become a real-word application niche where potential benefits of quantum annealing could be objectively assessed.
Quantum annealing (QA) serves as a specialized optimizer that is able to solve many NP-hard problems and that is believed to have a theoretical advantage over simulated annealing (SA) via quantum tunneling. With the introduction of the D-Wave programmable quantum annealer, a considerable amount of effort has been devoted to detect and quantify quantum speedup. While the debate over speedup remains inconclusive as of now, instead of attempting to show general quantum advantage, here, we focus on a novel real-world application of D-Wave in wireless networking-more specifically, the scheduling of the activation of the air-links for maximum throughput subject to interference avoidance near network nodes. In addition, D-Wave implementation is made error insensitive by a novel Hamiltonian extra penalty weight adjustment that enlarges the gap and substantially reduces the occurrence of interference violations resulting from inevitable spin bias and coupling errors. The major result of this paper is that quantum annealing benefits more than simulated annealing from this gap expansion process, both in terms of ST99 speedup and network queue occupancy. It is the hope that this could become a real-word application niche where potential benefits of quantum annealing could be objectively assessed.
We benchmark Quantum Annealing (QA) vs. Simulated Annealing (SA) with a focus on the impact of the embedding of problems onto the different topologies of the D-Wave quantum annealers. The series of problems we study are especially designed instances of the maximum cardinality matching problem that are easy to solve classically but difficult for SA and, as found experimentally, not easy for QA either. In addition to using several D-Wave processors, we simulate the QA process by numerically solving the time-dependent Schrödinger equation. We find that the embedded problems can be significantly more difficult than the unembedded problems, and some parameters, such as the chain strength, can be very impactful for finding the optimal solution. Thus, finding a good embedding and optimal parameter values can improve the results considerably. Interestingly, we find that although SA succeeds for the unembedded problems, the SA results obtained for the embedded version scale quite poorly in comparison with what we can achieve on the D-Wave quantum annealers.
The recent availability of the first commercial quantum computers has provided a promising tool to tackle NP hard problems which can only be solved heuristically with present techniques. However, it is unclear if the current state of quantum computing already provides a quantum advantage over the current state of the art in classical computing. This article assesses the performance of the D-Wave 2X quantum annealer on two NP hard graph problems, in particular clique finding and graph partitioning. For this, we provide formulations as Qubo and Ising Hamiltonians suitable for the quantum annealer and compare a variety of quantum solvers (Sapi, QBSolv, QSage provided by D-Wave Sys, Inc.) to current classical algorithms (METIS, Simulated Annealing, third-party clique finding and graph splitting heuristics) on certain test sets of graphs. We demonstrate that for small graph instances, classical methods still outperform the quantum annealer in terms of computing time, even though the quality of the best solutions obtained is comparable. Nevertheless, due to the limited problem size which can be embedded on the D-Wave 2X chip, the aforementioned finding applies to most of problems of general nature solvable on the quantum annealer. For instances specifically designed to fit the D-Wave 2X architecture, we observe substantial speed-ups in computing time over classical approaches.
Quantum annealing (QA) algorithm is a new quantum optimization algorithm based on the classical simulated annealing (SA) algorithm. Unlike classical SA algorithm, which uses the thermal waves to search for the optimal solution, the QA algorithm uses the quantum tunneling effect to allow a quantum to penetrate a potential barrier with a higher energy than itself. Therefore, the algorithm can get rid of the local extreme values and is more likely to approach the global optimal with higher probability. In the literature, the QA algorithm has shown perfect optimization effects on combinatorial optimization problems. In this paper, the basic concepts and application fields of QA algorithm, which is the core principle of D-Wave quantum computer, are systematically reviewed. The applications of QA algorithm in cryptography, traveling salesman problem, graph coloring problem, and traffic path are discussed in detail. In addition, the direction of future research for QA algorithm is explored.
This study introduces an innovative application of Parallel Quantum Annealing (PQA) to concurrently solve multiple NP-hard problems on a quantum annealer, leveraging unused qubits on D-Wave's Pegasus architecture to enhance efficiency and accuracy. While parallel execution of different problems on the same quantum annealing device has been previously explored, our application extends the current PQA method, which typically solves a single problem multiple times or different problems with minor embedded combinatorial optimization. This study primarily focuses on three NP-hard problems relevant to integrated circuit design: the Graph Coloring Problem (GCP), the Minimum Vertex Cover Problem (MVCP), and the Graph Partitioning Problem (GPP). After formulating these problems as Quadratic Unconstrained Binary Optimization (QUBO), they were embedded into the D-Wave quantum annealing machine, and the annealing process was run on the combined QUBO. The results were subsequently decoded into individual problems. Our results, quantified via the Time-To-Target (TTT) metric, showcased enhanced efficiency and accuracy in reaching target solutions, indicating a substantial improvement over traditional Quantum Annealing (QA) and Simulated Annealing (SA) methods. The research illustrates the potential of quantum computing for solving complex real-world problems more efficiently and emphasizes the importance of leveraging all available qubits in quantum annealers. The findings can significantly contribute to the development and optimization of quantum computing methods and have broad application implications, particularly in areas where NP-hard problems are prevalent.
The observation of an unequivocal quantum speedup remains an elusive objective for quantum computing. The D-Wave quantum annealing processors have been at the forefront of experimental attempts to address this goal, given their relatively large numbers of qubits and programmability. A complete determination of the optimal time-to-solution (TTS) using these processors has not been possible to date, preventing definitive conclusions about the presence of a scaling advantage. The main technical obstacle has been the inability to verify an optimal annealing time within the available range. Here we overcome this obstacle and present a class of problem instances for which we observe an optimal annealing time using a D-Wave 2000Q processor over a range spanning up to more than 2000 qubits. This allows us to perform an optimal TTS benchmarking analysis and perform a comparison to several classical algorithms, including simulated annealing, spin-vector Monte Carlo, and discrete-time simulated quantum annealing. We establish the first example of a scaling advantage for an experimental quantum annealer over classical simulated annealing: we find that the D-Wave device exhibits certifiably better scaling than simulated annealing, with 95% confidence, over the range of problem sizes that we can test. However, we do not find evidence for a quantum speedup: simulated quantum annealing exhibits the best scaling by a significant margin. Our construction of instance classes with verifiably optimal annealing times opens up the possibility of generating many new such classes, paving the way for further definitive assessments of scaling advantages using current and future quantum annealing devices.
Quantum computing has emerged as a promising computational paradigm with the potential to solve problems that are intractable for classical computers. This paper provides an overview of the current state of quantum computing, including its historical development, hardware advancements, applications, and challenges. Special attention is given to combinatorial optimization, which is considered one of the most promising application domains. The limitations of current quantum systems and future research directions are also discussed. This paper presents a comparative study between a conventional D-Wave-based simulated annealing approach and a proposed hybrid optimization model for solving largescale combinatorial optimization problems. The study focuses on benchmark problems, including AES, TSP gr24, and a real-world load balancing problem, all formulated as QUBO models. The D-Wave approach employs the dwave-neal simulated annealing engine with various parameter settings, while the proposed model introduces a decomposition-based framework combined with adaptive parameter control and iterative refinement. The experimental results demonstrate that the proposed model consistently outperforms the conventional approach in terms of solution quality, achieving significantly lower energy values across all problem instances. In particular, for the TSP gr24 problem, the proposed model achieves near-optimal solutions with substantially reduced computation time. For large-scale problems such as AES and load balancing, the proposed model maintains scalability and robustness, whereas the conventional approach suffers from increased computational cost and performance degradation. Although the proposed method introduces additional computational steps, its hybrid structure effectively mitigates limitations related to local minima, parameter sensitivity, and scalability. These findings indicate that integrating classical optimization techniques with quantum-inspired methods is essential for practical applications. The proposed model provides a promising framework for solving complex real-world optimization problems and highlights the importance of hybrid approaches in advancing quantum annealing technologies.