We present analysis of a radar detection technique using a Photon Addition Homodyne Receiver (PAHR) that improves SNR of the interferometer fringes and reduces uncertainty of the phase measurement. This system uses the concept of Photon Addition (PA) in which the coherent photon distribution is altered. We discuss this process first as a purely mathematical concept to introduce PA and illustrate its effect on coherent photon distribution. We then present a notional proof-of-concept experiment involving a parametric down converter (PDC) and probabilistic post-selection of the results. We end with presentation of a more deterministic PAHR concept that is more suitable for development into a working system. Coherent light illuminates a target and the return signal interferes with the local oscillator reference photons to create the desired fringes. The PAHR alters the photon probability distribution of the returned light via interaction between the return photons and atoms. We refer to this technique as “Atom Interaction” or AI. The returning photons are focused at the properly prepared atomic system. The injected atoms into this region are prepared in the desired quantum state. During the interaction time, the initial quantum state evolves in such a way that the photon distribution function changes resulting in higher photon count, lower phase noise and an increase in fringe SNR. The result is a 3-5X increase of fringe SNR. This method is best suited for low light intensity (low photon count, 0.1-5) applications. The detection protocol could extend the range of existing systems without loss of accuracy, or conversely enhance a system’s accuracy for given range. We present quantum mathematical analysis of the method to illustrate how both range and angular resolution improve in comparison with standard measurement techniques. We also suggest an experimental path to validate the method which also will lead toward deployment in the field.
We present analysis of a radar detection technique using a Photon Addition Homodyne Receiver (PAHR) that improves SNR of the interferometer fringes and reduces uncertainty of the phase measurement. This system uses the concept of Photon Addition (PA) in which the coherent photon distribution is altered. We discuss this process first as a purely mathematical concept to introduce PA and illustrate its effect on coherent photon distribution. We then present a notional proof-of-concept experiment involving a parametric down converter (PDC) and probabilistic post-selection of the results. We end with presentation of a more deterministic PAHR concept that is more suitable for development into a working system. Coherent light illuminates a target and the return signal interferes with the local oscillator reference photons to create the desired fringes. The PAHR alters the photon probability distribution of the returned light via interaction between the return photons and atoms. We refer to this technique as “Atom Interaction” or AI. The returning photons are focused at the properly prepared atomic system. The injected atoms into this region are prepared in the desired quantum state. During the interaction time, the initial quantum state evolves in such a way that the photon distribution function changes resulting in higher photon count, lower phase noise and an increase in fringe SNR. The result is a 3-5X increase of fringe SNR. This method is best suited for low light intensity (low photon count, 0.1-5) applications. The detection protocol could extend the range of existing systems without loss of accuracy, or conversely enhance a system’s accuracy for given range. We present quantum mathematical analysis of the method to illustrate how both range and angular resolution improve in comparison with standard measurement techniques. We also suggest an experimental path to validate the method which also will lead toward deployment in the field.
This paper provides a brief introduction of the current state of quantum radar (QR) technology development, focusing on the experimental methods used for modifying QR in a laboratory setting. We delve into the foundational principles of quantum electrodynamics and consider interferometric aspects. Quantum radar systems, empowered by quantum measurements, extend their capabilities beyond conventional target detection and recognition, encompassing the detection and identification of RF stealth platforms and advanced weapons systems. Quantum technology is gaining paramount significance in various research domains, with the emergence of the concept of quantum radar, which leverages the quantum states of photons to extract information from distant targets. The mechanism involves dispatching photons, or photon clusters, toward the target, whereupon they are absorbed and subsequently re-emitted. The crucial measurement process can be executed in two distinct manners. One approach entails an interferometric measurement, often referred to as phase measurement, conducted on the photons, while the alternative method involves the straightforward quantification of returning photons. These methods are respectively known as Interferometric QR and Quantum Illumination (QI). In both approaches, one can opt to employ stationary quantum states of photons or harness entangled states. Extensive research has demonstrated that the use of entangled states yields the most significant resolution enhancement, achieving optimal results under ideal conditions. Quantum states offer a substantial advantage by virtue of their inherent correlations, referred to as quantum correlations, which augment both resolution and signal-to-noise ratio (SNR) in the radar system. This paper explores the intricacies of these advancements in quantum radar technology, shedding light on the underlying principles and experimental methodologies.
This Paper examines novel approach the advancements in Q-dots based quantum radar technology, design considerations for its integration, and quantum radar cross section (QRCS) based on interferometric and quantum electrodynamics. In addition to performing standard target detection and recognition duties, quantum radar systems with quantum measurement assistance may also detect and identify RF stealth platforms and missile systems. In numerous fields of study, the advancement of radar technology is crucial. A quantum radar is a notion that has been developed that uses photon quantum states to gather information about a distant target. A single photon or a small group of photons is directed in the direction of the target. The target absorbs the photons, which are then re-emitted into the receiver. There are two possible approaches to carrying out the measurement procedure. An interferometric analysis can be performed.one can either count the number of photons that return or perform a measurement (or phase measurement) on the photon. Since the latter technique is called Quantum Illumination, the former is called Interferometric Quantum Radar. Entangled states or stationary quantum states of photons can be used for either of those techniques. Entangled states have been demonstrated to offer the best resolution enhancement, reaching the optimum situation. Compared to classical approaches, the advantage of adopting quantum states is that they show more degrees of correlation via which information can be obtained. These additional correlations, sometimes referred to as quantum correlations, increase the radar system's potential resolution and signal/noise ratio (SNR). Relationship research between the two photons is conducted in order to gather data. Coherent state quantum radar relies on coherent state photons and a quantum detection technique to overcome the diffraction limit. The design and operating concepts of quantum applied trends are also reviewed in this work.
This paper presents a study on quantum radar technology developments, design Consideration for its integration, and quantum radar cross-section, QRCS based on quantum electrodynamics and interferometric considerations. Quantum radar systems supported by quantum measurement can fulfill not only conventional target detection and recognition tasks but are also capable of detecting and identifying the RF stealth platform and weapons systems. The development of radar technology is of the utmost importance in many avenues of research. The concept of a quantum radar has been proposed which utilizes quantum states of photons to establish information on a target at a distance. A photon, or a little cluster of photons, is distributed towards the target. The photons are absorbed and reemitted from the target and into the receiver. The measurement process may be executed in two alternative ways. One can perform an interferometric measurement (or phase measurement) on the photon, or one can simply count the number of photons that return. the previous method is named Interferometric Quantum Radar, and therefore the latter method is termed Quantum Illumination. For either of those methods, one can use stationary quantum states of photons or use entangled states. Its been shown that entangled states provide the most effective possible boost in resolution, achieving within the ideal case. The benefit of using quantum states is that they exhibit extra degrees of correlation by which to get information compared to classical methods. These extra correlations (called quantum correlations) serve to boost the resolution and signal/noise (SNR) that may be achieved within the radar system.
Quantum radar represents a major shift in sensing by leveraging quantum correlations and entanglement to detect targets beyond the line of sight in complex environments. Unlike classical radar, which suffers severe performance loss in dense urban areas due to multipath effects, clutter, and noise, quantum radar uses biphoton correlations to preserve strong detection sensitivity even under heavy interference. This chapter presents a comprehensive review of quantum radar systems, focusing on NLOS functionality. It describes key concepts such as biphoton generation through spontaneous parametric down-conversion, quantum illumination methods, and optimal detection strategies. Practical implementations using cryogenic superconducting nanowire single-photon detectors and AI-based signal processing are also discussed. The role of quantum radar in future 6G integrated sensing and communication frameworks is explored, highlighting uses in autonomous vehicle safety and smart city monitoring. Simulation studies show detection rates above 95% at a 1 km NLOS distance, with up to a tenfold SNR improvement over classical systems, while experiments demonstrate more than 20 dB of noise reduction. The chapter concludes by addressing ongoing challenges like decoherence, scalability, and standardization, and outlines a pathway toward deployable quantum radar technologies by 2030 for Industry 5.0 applications.
Quantum radar represents a major shift in sensing by leveraging quantum correlations and entanglement to detect targets beyond the line of sight in complex environments. Unlike classical radar, which suffers severe performance loss in dense urban areas due to multipath effects, clutter, and noise, quantum radar uses biphoton correlations to preserve strong detection sensitivity even under heavy interference. This chapter presents a comprehensive review of quantum radar systems, focusing on NLOS functionality. It describes key concepts such as biphoton generation through spontaneous parametric down-conversion, quantum illumination methods, and optimal detection strategies. Practical implementations using cryogenic superconducting nanowire single-photon detectors and AI-based signal processing are also discussed. The role of quantum radar in future 6G integrated sensing and communication frameworks is explored, highlighting uses in autonomous vehicle safety and smart city monitoring. Simulation studies show detection rates above 95% at a 1 km NLOS distance, with up to a tenfold SNR improvement over classical systems, while experiments demonstrate more than 20 dB of noise reduction. The chapter concludes by addressing ongoing challenges like decoherence, scalability, and standardization, and outlines a pathway toward deployable quantum radar technologies by 2030 for Industry 5.0 applications.
Quantum radars and lidars are a novel, much-discussed, and rapidly evolving field of quantum science and technology, promising remarkable advantages in such basic tasks as target detection, ranging, and recognition. Quantum radars and lidars have already moved from the realm of theoretical considerations toward experiments, green, and as is the case for lidars, toward practical applications. Here we review the underlying concepts and present the basic configurations of quantum radars and lidars based on photonic entanglement and single-photon detection. We also briefly discuss the methods of producing entangled photons, such as spontaneous parametric down conversion (SPDC), spontaneous four-wave mixing, Josephson parametric amplifiers (JPAs), and quantum antennas. We show that quantum technologies open promising avenues toward the enhancement of signal-to-noise ratio (SNR) and overcoming the Rayleigh limit in radar and lidar systems.