Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Yuhang jice jishu

Laser Cooling and Optical Lattice Trapping of Strontium Atoms

Zhanjun Fang

Published Jan 1, 2011• 1 citation
OpenAlex

Abstract

The Strontium cooling experiment realized to transfer atoms from the first stage broadband cooling to the second stage narrow line cooling.The temperature of the atoms after the second stage cooling is about 2μK.The lattice laser is on during the cooling process,so the atoms are loaded into the lattice when their temperature is low enough.cooled by narrow line cooling.

Related papers

Narrow Line Cooling of 88Sr Atoms in the Magneto-optical Trap for Precision Frequency Standard

S A Strelkin, A. A. Galyshev, O I Berdasov +5 more

We report on our progress toward the realization of a Strontium optical lattice clock, which is under development at VNIIFTRI as a part of GLONASS program. We’ve prepared the narrow line width laser system for secondary cooling of 88Sr atoms which allows us to reach atom cloud temperature below 3 μK after second cooling stage.

Physics Procedia•Jan 1, 2015•4 citations

Ultracold 88Sr atoms for an optical lattice clock

Thomas Legero, J. S. Raaj Vellore Winfred, F. Riehle +1 more

This paper reports results of cooling and trapping of88Sr for future use in an optical lattice clock. Strontium atoms are cooled to ultra-cold temperatures using a two-stage cooling process. In the first stage, atoms are captured from a Zeeman-slowed atomic beam and cooled to 2 mK in a magneto optical trap operated on the1So-1P1transition at 461 nm. The second cooling stage utilizes the spin forbidden1So-3P1transition at 689 nm. To reach ultra-cold temperatures, 50 ms of broadband cooling is followed by 28 ms long single frequency cooling. The transfer efficiency from the first to the second cooling stage was measured to be 23%, leaving 7 x 106 atoms at a temperature of 1 muK. The atomic cloud is overlapped with a horizontally oriented 1-D far-off resonance optical dipole trap (FORT) at 813 nm with an effective potential depth of 25 muK. Due to equal light shifts of the1Soand the3P1state simultaneous Doppler cooling during the atom loading into the FORT is possible which leads to a transfer efficiency into the dipole trap of up to 60%.

Joint Conference of the European Frequency and Time Forum and IEEE International Frequency Control Symposium (EFTF/IFCS)•May 1, 2007•4 citations

Electromagnetically Induced Transparency (EIT) aided cooling of strontium atoms

Korak Biswas, Patel, Kushal, S. Sagar Maurya +3 more

The presence of ultra-narrow inter-combination spectroscopic lines in alkaline earth elements places them as promising candidates for optical atomic clocks, quantum computation, and for probing fundmental physics. Doppler cooling of these atoms is typically achieved through two subsequent stages: the initial cooling is on the 1s0-1p1 transition followed by cooling using the narrow-line 1s0-3p1 transition. However, due to significantly lower linewidth of the second stage cooling transition, efficient transfer of atoms into the second stage becomes technically challenging. The velocity distribution of the atoms after the first stage of cooling is too broad for atoms to be captured efficiently in the second stage cooling. As a result, the capture efficiency of atoms into the second stage Magneto-Optical Trap is low, even if the linewidth of the second stage cooling laser is artificially broadened.

arXiv:2311.08318•Nov 14, 2023•1 citation

Experimental research on loading strontium bosons into the optical lattice operating at the “magic” wavelength

Tian Xiao, Wang Ye-Bing, Lu Ben-Quan +7 more

The optical lattice clock with neutral atoms occupies an outstanding position in the research field of atomic clocks, demonstrating the great potential of its performance (like the uncertainty and the stability). At present, the optical lattice clock has realized a 10-18 level of its uncertainty. In this paper, we present the realization of loading bosonic atoms 88Sr (strontium, alkaline-earth metals) into a one-dimensional (1D) optical lattice in our laboratory. The optical lattice where the atoms are trapped can make the energy level shift, called Stark shift. But there is the special optical lattice operating at the “magic” wavelength for clock transitions (5s2) 1S0-(5s5p) 3P0, which can make the same Stark light-shift for both of them, indicating a zero light-shift relative to the clock. In our experiment, Sr atoms are cooled in a two-stage cooling and its temperature can be as low as 2 μK. Then these cold atoms are confined in the Lamb-Dicke region by the lattice laser output from an amplified diode laser operating at the “magic” wavelength, 813 nm. Experimentally, it is straightforward to provide 850 mW of lattice power focused to a 38 μm beam radius. After the cold atoms have trapped in the optical lattice, the lifetime of atoms in 1D optical lattice is measured to be 270 ms. The temperature and the number are about 3.5 μK and 1.2×105 respectively. Besides, effects of the power of the lattice laser on both the number and temperature are analyzed. The number changes linearly with the laser power, while there is no obvious influence on the temperature by the power. This original and special approach for atoms trapped in the optical lattice can provide a long interrogation time for probing the clock transition. Furthermore, it may be the foundation for developing our optical lattice clock of strontium atoms.

Acta Physica Sinica•Jan 1, 2015•0 citations

Second-Stage Laser Cooling of Ytterbium Atoms without Using a First-Stage Magneto-Optical Trap

Anton P. Vyalykh, Anastasia V. Semenko, A. V. Kohanov +2 more

A compact laser cooling system for transportable optical lattice clocks based on cold 171 Yb atoms has been presented. The system size has been reduced by eliminating the first cooling stage and using compact configurations for the main subsystems of the laser cooling system. A Zeeman slower has been modeled and developed, reducing the velocity of atoms from a thermal source to a level sufficient for their direct capture in a second-stage magneto-optical trap, avoiding the first cooling stage. A method for estimating the number of atoms and their temperature in the magneto-optical trap is presented. The performance of the compact laser cooling system with the developed Zeeman slower has been experimentally confirmed: ~10 6 171 Yb atoms with a temperature of ~35 μK have been collected in ~1 s. The achieved parameters allow for loading of ~4000 atoms into the optical lattice.

Journal of Experimental and Theoretical Physics Letters•Jun 1, 2026•0 citations

Trapping and Interfacing Laser-Cooled Strontium Atoms Using an Optical Nanofiber

Luca Göcke, Hector Letellier, Philipp Schneeweiß +2 more

We are in the process of building an experimental setup for trapping and optically interfacing laser-cooled strontium atoms using the evanescent field surrounding an optical nanofiber [1]. The nanofiber is produced from a standard step-index optical fiber in a heat-pull process. It features a waist diameter of 230 nm where light is still efficiently guided while a significant part of the light propagates in the form of an evanescent field surrounding the nanofiber. Atoms are trapped in a one-dimensional (1D) optical lattice formed by two fiber-guided light-fields, red- and blue-detuned with respect to the strong transition at a wavelength of 461 nm. The aim is to realize a compensated trap, where the wavelengths of the trapping fields are magic for the 7.4 kHz wide intercombination line at 689 nm. This will allow us to implement advanced schemes for loading atoms into the 1D optical lattice and to investigate the phenomenon of selective radiance [2], where the atoms themselves can act as the waveguide. Here we will present our compact design for trapping strontium atoms from a laser ablated source with a “hot MOT” (operated at 461 nm wavelength), then transfer them to a “cold MOT” (operated at the intercombination line) and to the nanofiber trap.

Conference on Lasers and Electro-Optics Europe & European Quantum Electronics Conference (CLEO/Europe-EQEC)•Jun 23, 2025•0 citations
The Strontium cooling experiment realized to transfer atoms from the first stage broadband cooling to the second stage narrow line cooling.The temperature of the atoms after the second stage cooling is about 2μK.The lattice laser is on during the cooling process,so the atoms are loaded into the lattice when their temperature is low enough.cooled by narrow line cooling.
This paper reports results of cooling and trapping of88Sr for future use in an optical lattice clock. Strontium atoms are cooled to ultra-cold temperatures using a two-stage cooling process. In the first stage, atoms are captured from a Zeeman-slowed atomic beam and cooled to 2 mK in a magneto optical trap operated on the1So-1P1transition at 461 nm. The second cooling stage utilizes the spin forbidden1So-3P1transition at 689 nm. To reach ultra-cold temperatures, 50 ms of broadband cooling is followed by 28 ms long single frequency cooling. The transfer efficiency from the first to the second cooling stage was measured to be 23%, leaving 7 x 106 atoms at a temperature of 1 muK. The atomic cloud is overlapped with a horizontally oriented 1-D far-off resonance optical dipole trap (FORT) at 813 nm with an effective potential depth of 25 muK. Due to equal light shifts of the1Soand the3P1state simultaneous Doppler cooling during the atom loading into the FORT is possible which leads to a transfer efficiency into the dipole trap of up to 60%.
The presence of ultra-narrow inter-combination spectroscopic lines in alkaline earth elements places them as promising candidates for optical atomic clocks, quantum computation, and for probing fundmental physics. Doppler cooling of these atoms is typically achieved through two subsequent stages: the initial cooling is on the 1s0-1p1 transition followed by cooling using the narrow-line 1s0-3p1 transition. However, due to significantly lower linewidth of the second stage cooling transition, efficient transfer of atoms into the second stage becomes technically challenging. The velocity distribution of the atoms after the first stage of cooling is too broad for atoms to be captured efficiently in the second stage cooling. As a result, the capture efficiency of atoms into the second stage Magneto-Optical Trap is low, even if the linewidth of the second stage cooling laser is artificially broadened.
The optical lattice clock with neutral atoms occupies an outstanding position in the research field of atomic clocks, demonstrating the great potential of its performance (like the uncertainty and the stability). At present, the optical lattice clock has realized a 10-18 level of its uncertainty. In this paper, we present the realization of loading bosonic atoms 88Sr (strontium, alkaline-earth metals) into a one-dimensional (1D) optical lattice in our laboratory. The optical lattice where the atoms are trapped can make the energy level shift, called Stark shift. But there is the special optical lattice operating at the “magic” wavelength for clock transitions (5s2) 1S0-(5s5p) 3P0, which can make the same Stark light-shift for both of them, indicating a zero light-shift relative to the clock. In our experiment, Sr atoms are cooled in a two-stage cooling and its temperature can be as low as 2 μK. Then these cold atoms are confined in the Lamb-Dicke region by the lattice laser output from an amplified diode laser operating at the “magic” wavelength, 813 nm. Experimentally, it is straightforward to provide 850 mW of lattice power focused to a 38 μm beam radius. After the cold atoms have trapped in the optical lattice, the lifetime of atoms in 1D optical lattice is measured to be 270 ms. The temperature and the number are about 3.5 μK and 1.2×105 respectively. Besides, effects of the power of the lattice laser on both the number and temperature are analyzed. The number changes linearly with the laser power, while there is no obvious influence on the temperature by the power. This original and special approach for atoms trapped in the optical lattice can provide a long interrogation time for probing the clock transition. Furthermore, it may be the foundation for developing our optical lattice clock of strontium atoms.
A compact laser cooling system for transportable optical lattice clocks based on cold 171 Yb atoms has been presented. The system size has been reduced by eliminating the first cooling stage and using compact configurations for the main subsystems of the laser cooling system. A Zeeman slower has been modeled and developed, reducing the velocity of atoms from a thermal source to a level sufficient for their direct capture in a second-stage magneto-optical trap, avoiding the first cooling stage. A method for estimating the number of atoms and their temperature in the magneto-optical trap is presented. The performance of the compact laser cooling system with the developed Zeeman slower has been experimentally confirmed: ~10 6 171 Yb atoms with a temperature of ~35 μK have been collected in ~1 s. The achieved parameters allow for loading of ~4000 atoms into the optical lattice.
We are in the process of building an experimental setup for trapping and optically interfacing laser-cooled strontium atoms using the evanescent field surrounding an optical nanofiber [1]. The nanofiber is produced from a standard step-index optical fiber in a heat-pull process. It features a waist diameter of 230 nm where light is still efficiently guided while a significant part of the light propagates in the form of an evanescent field surrounding the nanofiber. Atoms are trapped in a one-dimensional (1D) optical lattice formed by two fiber-guided light-fields, red- and blue-detuned with respect to the strong transition at a wavelength of 461 nm. The aim is to realize a compensated trap, where the wavelengths of the trapping fields are magic for the 7.4 kHz wide intercombination line at 689 nm. This will allow us to implement advanced schemes for loading atoms into the 1D optical lattice and to investigate the phenomenon of selective radiance [2], where the atoms themselves can act as the waveguide. Here we will present our compact design for trapping strontium atoms from a laser ablated source with a “hot MOT” (operated at 461 nm wavelength), then transfer them to a “cold MOT” (operated at the intercombination line) and to the nanofiber trap.