It has been found that the quantum radar cross section (QRCS) equation can be written in terms of the Fourier transform of the surface atom distribution of the object. This paper uses this form to provide an analytical formulation of the quantum radar cross section by deriving closed form expressions for various geometries. These expressions are compared to the classical radar cross section (RCS) expressions and the quantum advantages are discerned from the differences in the equations. Multiphoton illumination is also briefly discussed.
It has been found that the quantum radar cross section (QRCS) equation can be written in terms of the Fourier transform of the surface atom distribution of the object. This paper uses this form to provide an analytical formulation of the quantum radar cross section by deriving closed form expressions for various geometries. These expressions are compared to the classical radar cross section (RCS) expressions and the quantum advantages are discerned from the differences in the equations. Multiphoton illumination is also briefly discussed.
In radar, the amount of returns that an object sends back to the receiver after
being struck by an electromagnetic wave is characterized by what is known as the
radar cross section, denoted by � typically. There are many mechanisms that affect
how much radiation is reflected back in the receiver direction, such as reflectivity,
physical contours and dimensions, attenuation properties of the materials, projected
cross sectional area and so on. All of these characteristics are lumped together in a
single value of �, which has units of m2. Stealth aircrafts for example are designed
to minimize its radar cross section and return the smallest amount of radiation
possible in the receiver direction.
A new concept has been introduced called quantum radar, that uses correlated
quantum states of photons as well as the unique properties of quantum mechanics
to ascertain information on a target at a distance. At the time of writing this
dissertation, quantum radar is very much in its infancy. There still exist fundamental
questions about the feasibility of its implementation, especially in the microwave
spectrum. However, what has been theoretically determined, is that quantum radar
has a fundamental advantage over classical radar in terms of resolution and returns
in certain regimes.
Analogous to the classical radar cross section (CRCS), the concept of the
quantum radar cross section (QRCS) has been introduced. This quantity measures
how “large” an object looks to a quantum radar be describing how a single photon, or
small cluster of photons scatter off of a macroscopic target. Preliminary simulations
of the basic quantum radar cross section equation have yielded promising results
showing an advantage in sidelobe response in comparison to the classical RCS. This
document expands upon this idea by providing insight as to where this advantage expanding upon the theory.
The expanded theory presented in this document includes re-deriving the QRCS
formula to be a general bistatic formula, as the current equation is only valid for
monostatic radar geometries. This re-derivation process also leads to the addition of
terms that capture the effect of photon polarization, something that is not properly
taken into account in the current literature. Most importantly, a new formulation
of the QRCS formula will be derived that includes writing the equation in terms
of Fourier transforms. This has a profound impact on the analysis of the theory
of the QRCS as it allows for the derivation of closed form solutions of certain
geometries, something that has never been possible due to the form of the current
QRCS equation. All together, this document will provide a complete and general
theory of the QRCS.
After deriving the necessary equations, there will be extensive work in the
utilization of these equations in deriving geometry dependent responses and comparing
the closed form solutions to the classical solutions as well as comparing the
solutions to the numerical simulations.
The current literature relies exclusively on numerical simulations…
We derive a modified analytical expression of a quantum radar cross section (QRCS). Subsequently, we present a comparison between the QRCS and a classical radar cross section (RCS) and analyze the factors that can affect the intensity of the peak and side lobes. Simulation results on a flat rectangular plate demonstrate that QRCS has a similar structure to that of RCS. The analysis of side-lobe structure can benefit the design of quantum stealth platforms as well as the research on quantum radars.
In this paper, a Fourier expression of the quantum radar cross section (QRCS) of a dihedral corner reflector is proposed, which avoids the problems caused by atomic sampling on the target-object surface and is a powerful tool for analyzing the scattering characteristics of the reflector. We compare the result of the proposed expression with that of numerical calculations, and have preliminarily verified its correctness. On this basis, we discuss the influence of the wavelength of single photon pulses and the panel size of a dihedral corner reflector on QRCS in detail. Simulation results demonstrate that from a single factor of wavelength, a quantum radar using a small-wavelength quantum signal has better visibility to the reflector, and the quantum scattering intensity is proportional to the panel size. Compared with classical radar, quantum radar has an enhanced detection performance that is more stable within a wide angle range, which is insensitive to the wavelength of the quantum signal and panel size of the reflector and is helpful for the detection of stealth targets.
Closed-form expressions for the bistatic quantum radar scattered by the circular and triangular plates with the single-photon incidence are derived in the field of the Fourier relationship between the surface atom distribution and the bistatic quantum radar cross section (BIQRCS). The proposed expressions are highly efficient useful tools to analytically estimate the BIQRCS of the typical simple plates in the condition of high frequency approximation. And the formulas have been preliminarily verified by the numerical solution for the typical incident angles. In addition, the analysis of the quantum effect of sidelobes of BIQRCS in scattering, which can be seen as a kind of quantum interference, is also presented. We expect that this achievement will apply to the modeling of bistatic quantum radar scattering.
The quantum radar cross section (QRCS) is a measure of how electromagnetically “large” an object appears to a quantum radar. The fundamental mechanism that creates the return response is the interaction between the atomic electric dipole moments and the incoming photon. This paper derives the QRCS equation considering the effect of photon polarization in this interaction, as well as providing a means to study bistatic radar geometries. It is found that under normal circumstances, polarization plays no role in the target response. However, if the target's atomic dipoles are all aligned in one particular direction, such as if the object is in a strong uniform or slowly varying field, polarization has a significant effect on the response by allowing us to “steer” the location of a null to any observation angle desired. Furthermore, scattering can be suppressed in a very large range of scattering angles (not just one) if the polarization of the object and photon are chosen judiciously. It will be shown that this effect is unique to quantum radar and has no classical counterpart.
With the development of quantum radar technology, the interaction of photons and targets has gradually become a new hotspot. Quantum radar cross section (QRCS) is an important parameter fon describing the visibility of the target illuminated by light quantum. #br#According to the conservation of energy and the finite element method, the expression of QRCS derived by Marco Lanzagorta is extended, which can be applied to QRCS calculations of non-planar convex targets. As the surface elements of the target have different incident and scattering angles, the integral equation can give a higher calculation accuracy and is suitable for bistatic or multistatic situations. #br#The distribution pattern of the target’s atoms is varied. Using the interatomic distance as the only parameter to describe the atomic distribution is inaccurate. In this paper the metal atomic lattice is considered. Simulation of the QRCS that is composed of three kinds of metal atomic lattices (face-centered cubic, body-centered cubic and hexagonal close-packed lattices) with different atomic distributions has been made. The hexagonal close-packed lattice with asymmetrical distribution for different azimuth angles is discussed. Simulation result shows that with different arrangement of atoms, the main lobe of the target QRCS is basically unchanged, while the quantum side-lobes of the target with sparsely arranged atoms are much more significant. This reveals a different characteristic of QRCS, and provides theoretic basis for quantum radar and stealth technique researches.