A group of new equations about the field distribution and the dispersion relation as well as the propagation power is presented. The optical bistability is discussed for the nonlinear TE waves guided by a thin linear dielectric film bounded by nonlinear media.
In a recent paper1 I formulated a method for calculating propagation through nonlinear media for a number of nonlinear optical phenomena. This method does not use the SVEA and can therefore solve nonlinear propagation problems when refraction and reflection at the boundary interfaces are important. Here, I report the first calculation using this exact (albeit numerical) method. For this first test of the utility of the method, I have chosen to study optical bistability in a thin film whose index of refraction is intensity dependent.
We show that the optical response of a nonlinear dielectric film may exhibit optical bistability even in the thin-film limit. Using a rigorous numerical treatment, we also show that the resonant excitation of nonlinear guided modes propagating along the film leads to switching intensities 104 times lower than those obtained with use of the resonances associated with the Airy function.
The optical transmissivity of a mirrorless, nonlinear, absorbing dielectric thin film is investigated numerically. The dielectric function in the film region is dependent on the intensity of the electromagnetic field. Multivalued solutions of transmissivity as a function of incident power are calculated for the steady-state wave equation. The numerical solution is applied to two different model dielectric functions. As the absorption parameter is increased, larger values of incident intensity are required to switch the systems between stable output states. Also, the peak values of transmissivity are reduced as the absorption is increased.
We have analyzed four different guided wave approaches to achieving a power dependent refractive index and optical bistability. These include surface plasmons at the interface between a metal and a semiconductor, symmetric surface plasmon modes guided by thin metal films, conventional single film integrated optics waveguides, and multifilm integrated optics. The relative merits of each geometry are discussed for utilizing the large cubic nonlinearities in the semiconductors GaAs and InSb. Both the mode attenuation and the minimum power required for a nonlinear phase shift of\pi/2are evaluated numerically and it is shown that usable propagation distances can be obtained, even for highly lossy media such as GaAs.