Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Communications technology

Study of Micro-source on C Wave Band

Baohua Wang

Published Jan 1, 2010• 0 citations
OpenAlex

Abstract

By using Co2 laser melting to process erbium-doped fiber tip,a high spherical erbium-doped microsphere cavity is formed through surface tension.The size of erbium-doped microsphere is 21μm.By adjusting the location of erbium-doped microspheres precisely,using 980nm laser as the pumping source,the single mode erbium ion photon fluorescence spectra is obtainod,of which the central wavelength is around 1.55μm.It proves the frequency selection role of micro-cavity.Through further analysis of the spectrum,the Q of microsphere 108 is calculatecl,and the free spectral range in real measarment is basically consistent with that in theoretical analysis.

Related papers

Fabrication and analysis optical microsphere cavity based on high Q erbium-doped

Shubin Yan, Xiaoqian Wang, Ma Kezhen +3 more

Using CO2laser metal method process the top of erbium-doped tapered fiber, which formed by stretching a standard optical fiber (SMF-125) while heating it with a hydrogen flame. The top of tapered fiber formed erbium-doped microsphere cavity with higher spherical by its surface tension when heating is stopped. The size of erbium-doped microsphere is 21µm. The position of erbium-doped microsphere is accurately adjusted between the pump power and monochromatic spectrometer so that it can be easily excited by 980 nm and 1480 nm infrared light. Excited erbium ions produce energy level transition and a number of sharp transmission spectrums are observed around the center wavelength of 1550nm. It expanded the spectrum wide and proved the frequency selection role of micro-cavity. Further analysis of the experimental results, we obtained the quality factor Q=4.4×108through calculating the transmission spectrum which is consistent with the theoretical value largely.

IEEE International Conference on Nano/Micro Engineered and Molecular Systems•Apr 1, 2013•1 citation

Investigation on morphology-dependent resonances in Er~(3+) doped phosphate glass microsphere with light quantum mechanics

Liang Wei

The development of microspherical cavity theory is introduced,and the microspherical cavity is analyzed with light quantum mechanics.The 1533 nm fluorescence spectrum of the Er3+ doped phosphate glass microsphere(about 15 μm in diameter) was measured under laser excitation of 488 nm.The phenomenon of the morphology-dependent resonances of the fluorescence spectrum in the glass microsphere and its formation mechanism were observed and analyzed.The fluorescence spectra of the Er3+doped phosphate glass microsphere were compared with those of corresponding bulk glass.The single-mode oscillation amplitude generated by the Er3+ doped phosphate glass microsphere was obtained in the experiment.

Journal of Applied Optics•Jan 1, 2007•0 citations

Numerical simulation and software implementation of erbium-doped fiber source

Chengxiang Liu

Based on the energy level of erbium ions in the glass matrix,we analyzed the work mechanism of erbium-doped fiber super-fluorescent light source. The physical model of light source was set up,which was described by propagation equations of pump light and signal light along the erbium-fiber. By dividing the fluorescence spectra into 10 wavelengths,the issue was solving the boundary value problem of 21-dimensional ordinary differential equations. We translated the boundary value problems into an initial value problem using shooting method. The equations were solved using Runge-Kutta method. We wrote a program to implement the algorithms using Visual C++. The numerical simulation and software can provide directions for researching on erbium-doped fiber amplifiers and lasers.

JOURNAL OF SHENZHEN UNIVERSITY SCIENCE AND ENGINEERING•Jan 1, 2010•0 citations

Experimental Investigation on Near Gaussian-shaped Spectrum Erbium-Doped Fiber Super-flourescent Source in Double-pass Forward Configuration

叶薇薇 YE Wei-wei, 房鸿 FANG Hong, 刘承香 Liu Chengxiang +3 more

The on near Gaussian-shaped spectrum Erbium-doped fiber super-flourescent source was studied.The self-coherence function of Gaussian-shaped spectrum and the change of mean wavelength under different temperatures were theoretically analyzed.Using the double-pass forward configuration,the Gaussian-shaped spectrum was obtained with certain Erbium-doped fiber length.Meanwhile,pump powers could be adjusted to optimize the intrinsic thermal coefficient of Erbium-doped fiber.Finally,under the condition with erbium-doped fiber length of 10.05 m,LD power of 172 mW,the whole optical path(except pumping LD and the driving) in the environmental temperature from-40 ℃ to 60 ℃,the near Gaussian-shaped spectrum Erbium-doped fiber source with 66.651 ppm mean wavelength stability was obtained.

ACTA PHOTONICA SINICA•Jan 1, 2011•1 citation

Thermo-Optical Tuning of Whispering Gallery Modes in Erbium:Ytterbium Doped Glass Microspheres to Arbitrary Probe Wavelengths

Amy Watkins, Jonathan Ward, Síle Nic Chormaic

We present experimental results on an all-optical, thermally-assisted technique for broad range tuning of microsphere cavity resonance modes to arbitrary probe wavelengths. An erbium:ytterbium co-doped phosphate glass (Schott IOG-2) microsphere is pumped at 978 nm via the supporting stem and the heat generated by absorption of the pump light expands the cavity and changes the refractive index. This is a robust tuning method that decouples the pump from the probe and allows fine tuning of the microsphere's whispering gallery modes. Pump/probe experiments were performed to demonstrate thermo-optical tuning to specific probe wavelengths, including the5S1/2F= 3 to5P3/2F'= 4 laser cooling transition of rubidium-85. This is of particular interest for cavity quantum electrodynamics (QED)-type experiments, while the broad tuning range achievable is useful for integrated photonic devices, including sensors and modulators.

arXiv:1203.1434•Japanese Journal of Applied Physics•Apr 27, 2012•20 citations

Controlled spontaneous emission in erbium-doped microphotonic materials

Jeroen Kalkman

Erbium is a rare-earth metal that, when incorporated in a solid, can emit light at a wavelength of 1.5 μm. It plays a key role in current day telecommunication technology as the principle ingredient of optical fiber amplifiers. In this thesis the control of the Er spontaneous emission in three different types of microphotonic materials is described. Part I of this thesis focuses on the effect of a metallo-dielectric interface on the spontaneous emission of optical emitters in silica glass. It is shown that Er ions near a Ag interface can couple to surface plasmons (SPs) via a near-field interaction. By coupling SPs out into the far field, large changes in the Er photoluminescence emission distribution, spectra, and polarization can be observed. The excitation of SPs also results in an increase of the Er photoluminescence decay rate. The observed decay rates are in good agreement with calculations based on a classical dipole oscillator model. From the change in photoluminescence decay rate of Si nanocrystals near a Ag interface it is shown that Si nanocrystals can efficiently excite SPs and have an internal quantum efficiency of 77 %. Part II focuses on the effect of a microcavity on the spontaneous emission of Er and describes how ion implantation can be used to dope dielectric microresonators with optically active Er ions. The fabrication and characterization of an Er ion-implanted silica microsphere resonator is described that shows lasing at 1.5 μm when pumped above its lasing threshold. Ion implantation is also used to dope toroidal microcavities on a Si chip with Er. The microtoroids are doped by either pre-implantation into the SiO2 base material, or by post-implantation in a fully fabricated microtoroid. The optical activation of Er ions in the microtoroid is investigated and Er lasing at 1.5 μm is observed for both types of microcavities with the lowest threshold (4.5 μW) for the pre-implanted microtoroids. Part III describes the fabrication of an Er-doped Si-inverse opal photonic crystal. These photonic crystals can potentially have a photonic bandgap that can fully inhibit the spontaneous emission of on optical emitter. Fabrication criteria are derived for such a photonic crystal, based on the lattice parameter, filling fraction, and Si refractive index. In the opal photonic crystal composed of both Si and SiO2 we show that Er ions can be selectively excited in both the Si and SiO2 part of the photonic crystal by changing the excitation wavelength and/or the measurement temperature.

•Mar 9, 2005•3 citations
By using Co2 laser melting to process erbium-doped fiber tip,a high spherical erbium-doped microsphere cavity is formed through surface tension.The size of erbium-doped microsphere is 21μm.By adjusting the location of erbium-doped microspheres precisely,using 980nm laser as the pumping source,the single mode erbium ion photon fluorescence spectra is obtainod,of which the central wavelength is around 1.55μm.It proves the frequency selection role of micro-cavity.Through further analysis of the spectrum,the Q of microsphere 108 is calculatecl,and the free spectral range in real measarment is basically consistent with that in theoretical analysis.
Using CO2laser metal method process the top of erbium-doped tapered fiber, which formed by stretching a standard optical fiber (SMF-125) while heating it with a hydrogen flame. The top of tapered fiber formed erbium-doped microsphere cavity with higher spherical by its surface tension when heating is stopped. The size of erbium-doped microsphere is 21µm. The position of erbium-doped microsphere is accurately adjusted between the pump power and monochromatic spectrometer so that it can be easily excited by 980 nm and 1480 nm infrared light. Excited erbium ions produce energy level transition and a number of sharp transmission spectrums are observed around the center wavelength of 1550nm. It expanded the spectrum wide and proved the frequency selection role of micro-cavity. Further analysis of the experimental results, we obtained the quality factor Q=4.4×108through calculating the transmission spectrum which is consistent with the theoretical value largely.
The development of microspherical cavity theory is introduced,and the microspherical cavity is analyzed with light quantum mechanics.The 1533 nm fluorescence spectrum of the Er3+ doped phosphate glass microsphere(about 15 μm in diameter) was measured under laser excitation of 488 nm.The phenomenon of the morphology-dependent resonances of the fluorescence spectrum in the glass microsphere and its formation mechanism were observed and analyzed.The fluorescence spectra of the Er3+doped phosphate glass microsphere were compared with those of corresponding bulk glass.The single-mode oscillation amplitude generated by the Er3+ doped phosphate glass microsphere was obtained in the experiment.
Based on the energy level of erbium ions in the glass matrix,we analyzed the work mechanism of erbium-doped fiber super-fluorescent light source. The physical model of light source was set up,which was described by propagation equations of pump light and signal light along the erbium-fiber. By dividing the fluorescence spectra into 10 wavelengths,the issue was solving the boundary value problem of 21-dimensional ordinary differential equations. We translated the boundary value problems into an initial value problem using shooting method. The equations were solved using Runge-Kutta method. We wrote a program to implement the algorithms using Visual C++. The numerical simulation and software can provide directions for researching on erbium-doped fiber amplifiers and lasers.
The on near Gaussian-shaped spectrum Erbium-doped fiber super-flourescent source was studied.The self-coherence function of Gaussian-shaped spectrum and the change of mean wavelength under different temperatures were theoretically analyzed.Using the double-pass forward configuration,the Gaussian-shaped spectrum was obtained with certain Erbium-doped fiber length.Meanwhile,pump powers could be adjusted to optimize the intrinsic thermal coefficient of Erbium-doped fiber.Finally,under the condition with erbium-doped fiber length of 10.05 m,LD power of 172 mW,the whole optical path(except pumping LD and the driving) in the environmental temperature from-40 ℃ to 60 ℃,the near Gaussian-shaped spectrum Erbium-doped fiber source with 66.651 ppm mean wavelength stability was obtained.
We present experimental results on an all-optical, thermally-assisted technique for broad range tuning of microsphere cavity resonance modes to arbitrary probe wavelengths. An erbium:ytterbium co-doped phosphate glass (Schott IOG-2) microsphere is pumped at 978 nm via the supporting stem and the heat generated by absorption of the pump light expands the cavity and changes the refractive index. This is a robust tuning method that decouples the pump from the probe and allows fine tuning of the microsphere's whispering gallery modes. Pump/probe experiments were performed to demonstrate thermo-optical tuning to specific probe wavelengths, including the5S1/2F= 3 to5P3/2F'= 4 laser cooling transition of rubidium-85. This is of particular interest for cavity quantum electrodynamics (QED)-type experiments, while the broad tuning range achievable is useful for integrated photonic devices, including sensors and modulators.
Erbium is a rare-earth metal that, when incorporated in a solid, can emit light at a wavelength of 1.5 μm. It plays a key role in current day telecommunication technology as the principle ingredient of optical fiber amplifiers. In this thesis the control of the Er spontaneous emission in three different types of microphotonic materials is described. Part I of this thesis focuses on the effect of a metallo-dielectric interface on the spontaneous emission of optical emitters in silica glass. It is shown that Er ions near a Ag interface can couple to surface plasmons (SPs) via a near-field interaction. By coupling SPs out into the far field, large changes in the Er photoluminescence emission distribution, spectra, and polarization can be observed. The excitation of SPs also results in an increase of the Er photoluminescence decay rate. The observed decay rates are in good agreement with calculations based on a classical dipole oscillator model. From the change in photoluminescence decay rate of Si nanocrystals near a Ag interface it is shown that Si nanocrystals can efficiently excite SPs and have an internal quantum efficiency of 77 %. Part II focuses on the effect of a microcavity on the spontaneous emission of Er and describes how ion implantation can be used to dope dielectric microresonators with optically active Er ions. The fabrication and characterization of an Er ion-implanted silica microsphere resonator is described that shows lasing at 1.5 μm when pumped above its lasing threshold. Ion implantation is also used to dope toroidal microcavities on a Si chip with Er. The microtoroids are doped by either pre-implantation into the SiO2 base material, or by post-implantation in a fully fabricated microtoroid. The optical activation of Er ions in the microtoroid is investigated and Er lasing at 1.5 μm is observed for both types of microcavities with the lowest threshold (4.5 μW) for the pre-implanted microtoroids. Part III describes the fabrication of an Er-doped Si-inverse opal photonic crystal. These photonic crystals can potentially have a photonic bandgap that can fully inhibit the spontaneous emission of on optical emitter. Fabrication criteria are derived for such a photonic crystal, based on the lattice parameter, filling fraction, and Si refractive index. In the opal photonic crystal composed of both Si and SiO2 we show that Er ions can be selectively excited in both the Si and SiO2 part of the photonic crystal by changing the excitation wavelength and/or the measurement temperature.