Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Jisuanji yingyong yanjiu

Security method of wireless physical layer security based on multipath channel random delay

Liang Jin

Published Jan 1, 2012• 0 citations
OpenAlex

Abstract

For the wire-tapping in wireless communication system,this paper presented an encrypting method based on channel multipath delay-time information to ensure the security of physical layer in wireless communication system.In this method,the transmitter made the time to transmit symbol random with channel multipath delay-time information that estimated,and made the received signal of legitimate receiver stronger at the synchronization location.So the legitimate could receive the information normally.While the received signal of eavesdropper turned random for different channel information,such as phase and range.Then the eavesdropper couldn't recover the information with the random received signal,and the error probability was high,which increased the security of legitimate receiver.The simulations show that the method can keep the eavesdropper's error probability at a high level,so as to increase the system security.Finally,it comes to the conclusion that this method can ensure the security of physical layer in wireless communication system with channel multipath.

Related papers

The eigenvalue decomposition method for wireless physical layer security

Hongwei Pang, Xueming Wang, Kaizhi Huang +1 more

For the wiretapping in wireless communication system, this paper proposes an eigenvalue decomposition method for wireless physical layer security. In the method, firstly, the channel state information matrix is decomposed into sub-channels by eigenvalue decomposition. Secondly, we choose the sub-channels with bigger eigenvalue to transmit useful signal and the one with the smallest eigenvalue is transformed into a random channel. Then, the received signal of legitimate receiver becomes steady, while eavesdropper's turns random. The simulations show that, by choosing the characteristic, the method can decrease the demands of legitimate channel state, and keep the eavesdropper's error probability at a high level, so as to increase the system security. We can get the conclusion that the eigenvalue decomposition method can prevent wiretapping and increase wireless physical layer security between the transmitter and legitimate receiver effectively.

IEEE International Conference on Communication Technology (ICCT)•Nov 1, 2012•2 citations

Channel state based secure wireless communication

Katsuhiro Naito, Hiroki Sakakibara, Yosuke Mukai +2 more

This paper proposes a new channel state based secure wireless communication mechanism to realize secure communication with a pre-equalization function in a physical layer. Researches of physical layer security have been proposed to achieve secure communication in physical layers. On the contrary, there are a few issues where terminals in a same direction can receive a message, overhead due to complex control mechanisms, special hardware, etc. This paper focusses on practical wireless communication environment, where multi-path signals are received at a receiver. It is common knowledge that a channel state according to multi-path signals is different when a position of a receiver is different. The transmitter of proposed scheme transmits an optimized signal to a receiver with pre-equalizing the signal according to the channel state between the transmitter and the receiver. Therefore, only the receiver that has the same channel state for the pre-equalizing can obtain the high quality signal from the transmitter, and can demodulate the signal correctly. As a result, eavesdroppers around the transmitter cannot equalize the received signal before a demodulation process for the received signal because they exist at a different place of the receiver. The numerical results show that the proposed scheme can realize secure communication in typical wireless channel models. It means that a legitimate receiver can demodulate a signal correctly and eavesdroppers suffer from demodulation errors. As a result, we can find that the proposed scheme can utilize a channel state as an encryption key in physical layer security communication.

IEEE Conference on Computer Communications Workshops (INFOCOM WKSHPS)•Apr 1, 2016•4 citations

Compressive channel sensing based on random pilot for physical layer communication security

Hao Wei, Baoyu Zheng, Xiaoyun Hou

Accurate channel state information (CSI) is necessary for correctly receiving information. Compressive sensing has been used for channel estimation because of the sparsity of the wireless multipath channel. Based on compressive sensing, the channel estimation performance by setting pilots randomly is much better than uniformly and successively. This paper proposed a scheme for security communication in physical layer by exploiting the randomness of pilots to prevent eavesdropping in wireless communication. The transmitter places the pilots according to the random pilot codebook, then the legitimate user can accurately estimate CSI according to the codebook and the eavesdropper cannot because of not knowing the position of pilots. The simulation results show that the legitimate user can correctly decode information, while the BER performance of eavesdropper is very bad, and the security capacity is close to the legitimate user's capacity. This scheme effectively ensures the safety of the physical layer communication.

Wireless and Optical Communications Conference•May 1, 2013•4 citations

Time-domain reference based physical layer security method

LI Ming-lian

The physical-layer security method based on the transmitter's multi-antenna redundant isn't applicable to the SIMO-OFDM system. To solve the problem,this paper proposed a physical layer security method based on time-domain reference. The legitimate receiver constructs the random multi-antenna vector in each subcarrier,of which the projection in the main channel was equal to the varying time-domain reference variable. The transmitter secured the transmitted signal of this moment with the previous time-domain reference variable. The random variation of the reference variable disturbed the eavesdropper's received signal constellation,so that the eavesdropper couldn't intercept the secret information. Security analysis and simulation results show that the legitimate receiver's BER is 10- 4,the eavesdropper couldn't correctly demodulate the received signals when the received SNR and antenna number is respectively 10 dB and 8.

Jisuanji yingyong yanjiu•Jan 1, 2013•0 citations

Secure transmission mechanism based on time reversal over wireless multipath channels

Zhu Jiang, Wang Yan, Yang Tian

Broadband wireless communication is implemented primarily in a complicated environment. The complex environment with time-varying multi-path propagation characteristics will seriously affect the performance of communication. To solve the problem of insecurity in information transmission in wireless channels, in this paper a system is modeled by using the multi-input single output eavesdropping channel model and the security of information transmission through time reversal technology is ensured. Another problem is that the information focuses on the receiving point. Owing to the temporal and spatial focusing characteristics of the time reversal technology the information near the receiving point can be eavesdropped easily. To solve this problem, a secure transmission scheme based on time reversal technology with artificial noise interference on the transmitter side is proposed. One of the core technologies to solve this problem is to introduce the environment adaptive technique–time reversal in the wireless link. Further, the problem of a wiretap channel in physical layer security research has become a popular research topic in recent years. To solve the problems about the physical layer wiretap channel and multi-path fading in wireless channels, a novel concept combining time reversal technology with physical layer security technology is proposed. In this paper, a physical layer secure transmission scheme based on the joint time reversal technique and artificial noise at the sending end is proposed for the wireless multi-path channel. First, in a typical wiretap channel model the time reversal technique is used to improve the security of the information transmission process by using the properties of spatial and temporal focusing. It refers to the fact that information can be focused at a given moment and in space. Second, as the information is easily eavesdropped near the focus point, artificial noise is added to the sending end to disrupt the ability of the eavesdropper to eavesdrop. The artificial noise has no effect on legitimate user due to the use of null-space artificial noise in legitimate user. Based on this scheme, a closed expression, such as secure signal-to-interference and signal-to-noise ratio, an achievable secrecy rate and bit error rate are obtained, and the influences of the number of antennas, signal-to-noise ratio, and artificial noise are analyzed. The theoretical analysis and simulation results show that the proposed scheme has a higher secrecy signal-to-noise ratio, a higher rate of secrecy, and a lower bit error rate of the legitimate user than the the existing physical layer security schemes.

Acta Physica Sinica•Jan 1, 2018•3 citations

Secure transmission based on ergodic fading channel uncertainty

Bin Yang, Wenjie Wang, Hui‐Ming Wang +1 more

This paper presents physical layer security communication scheme for the wireless wire-tap channel. We investigate the feasibility of using the channel state information (CSI) as the key to encrypt the sending message. The inherent uncertainty and reciprocity of the time-variant wireless channel helps the sender to prevent the eavesdropper from getting any useful information without taking the risk of distribution of the key. The proposal results in perfect secrecy for some special signal. The secrecy capacity of the model is analyzed, we find out that the correlation between the legitimate channel and eavesdrop channel is very important for ensuring the secrecy of the transmission. The theoretical analysis and simulation result show that it is an efficient way for secure transmission based on ergodic fading wireless channel.

IEEE/CIC International Conference on Communications in China (ICCC)•Aug 1, 2013•0 citations
For the wire-tapping in wireless communication system,this paper presented an encrypting method based on channel multipath delay-time information to ensure the security of physical layer in wireless communication system.In this method,the transmitter made the time to transmit symbol random with channel multipath delay-time information that estimated,and made the received signal of legitimate receiver stronger at the synchronization location.So the legitimate could receive the information normally.While the received signal of eavesdropper turned random for different channel information,such as phase and range.Then the eavesdropper couldn't recover the information with the random received signal,and the error probability was high,which increased the security of legitimate receiver.The simulations show that the method can keep the eavesdropper's error probability at a high level,so as to increase the system security.Finally,it comes to the conclusion that this method can ensure the security of physical layer in wireless communication system with channel multipath.
For the wiretapping in wireless communication system, this paper proposes an eigenvalue decomposition method for wireless physical layer security. In the method, firstly, the channel state information matrix is decomposed into sub-channels by eigenvalue decomposition. Secondly, we choose the sub-channels with bigger eigenvalue to transmit useful signal and the one with the smallest eigenvalue is transformed into a random channel. Then, the received signal of legitimate receiver becomes steady, while eavesdropper's turns random. The simulations show that, by choosing the characteristic, the method can decrease the demands of legitimate channel state, and keep the eavesdropper's error probability at a high level, so as to increase the system security. We can get the conclusion that the eigenvalue decomposition method can prevent wiretapping and increase wireless physical layer security between the transmitter and legitimate receiver effectively.
This paper proposes a new channel state based secure wireless communication mechanism to realize secure communication with a pre-equalization function in a physical layer. Researches of physical layer security have been proposed to achieve secure communication in physical layers. On the contrary, there are a few issues where terminals in a same direction can receive a message, overhead due to complex control mechanisms, special hardware, etc. This paper focusses on practical wireless communication environment, where multi-path signals are received at a receiver. It is common knowledge that a channel state according to multi-path signals is different when a position of a receiver is different. The transmitter of proposed scheme transmits an optimized signal to a receiver with pre-equalizing the signal according to the channel state between the transmitter and the receiver. Therefore, only the receiver that has the same channel state for the pre-equalizing can obtain the high quality signal from the transmitter, and can demodulate the signal correctly. As a result, eavesdroppers around the transmitter cannot equalize the received signal before a demodulation process for the received signal because they exist at a different place of the receiver. The numerical results show that the proposed scheme can realize secure communication in typical wireless channel models. It means that a legitimate receiver can demodulate a signal correctly and eavesdroppers suffer from demodulation errors. As a result, we can find that the proposed scheme can utilize a channel state as an encryption key in physical layer security communication.
Accurate channel state information (CSI) is necessary for correctly receiving information. Compressive sensing has been used for channel estimation because of the sparsity of the wireless multipath channel. Based on compressive sensing, the channel estimation performance by setting pilots randomly is much better than uniformly and successively. This paper proposed a scheme for security communication in physical layer by exploiting the randomness of pilots to prevent eavesdropping in wireless communication. The transmitter places the pilots according to the random pilot codebook, then the legitimate user can accurately estimate CSI according to the codebook and the eavesdropper cannot because of not knowing the position of pilots. The simulation results show that the legitimate user can correctly decode information, while the BER performance of eavesdropper is very bad, and the security capacity is close to the legitimate user's capacity. This scheme effectively ensures the safety of the physical layer communication.
The physical-layer security method based on the transmitter's multi-antenna redundant isn't applicable to the SIMO-OFDM system. To solve the problem,this paper proposed a physical layer security method based on time-domain reference. The legitimate receiver constructs the random multi-antenna vector in each subcarrier,of which the projection in the main channel was equal to the varying time-domain reference variable. The transmitter secured the transmitted signal of this moment with the previous time-domain reference variable. The random variation of the reference variable disturbed the eavesdropper's received signal constellation,so that the eavesdropper couldn't intercept the secret information. Security analysis and simulation results show that the legitimate receiver's BER is 10- 4,the eavesdropper couldn't correctly demodulate the received signals when the received SNR and antenna number is respectively 10 dB and 8.
Broadband wireless communication is implemented primarily in a complicated environment. The complex environment with time-varying multi-path propagation characteristics will seriously affect the performance of communication. To solve the problem of insecurity in information transmission in wireless channels, in this paper a system is modeled by using the multi-input single output eavesdropping channel model and the security of information transmission through time reversal technology is ensured. Another problem is that the information focuses on the receiving point. Owing to the temporal and spatial focusing characteristics of the time reversal technology the information near the receiving point can be eavesdropped easily. To solve this problem, a secure transmission scheme based on time reversal technology with artificial noise interference on the transmitter side is proposed. One of the core technologies to solve this problem is to introduce the environment adaptive technique–time reversal in the wireless link. Further, the problem of a wiretap channel in physical layer security research has become a popular research topic in recent years. To solve the problems about the physical layer wiretap channel and multi-path fading in wireless channels, a novel concept combining time reversal technology with physical layer security technology is proposed. In this paper, a physical layer secure transmission scheme based on the joint time reversal technique and artificial noise at the sending end is proposed for the wireless multi-path channel. First, in a typical wiretap channel model the time reversal technique is used to improve the security of the information transmission process by using the properties of spatial and temporal focusing. It refers to the fact that information can be focused at a given moment and in space. Second, as the information is easily eavesdropped near the focus point, artificial noise is added to the sending end to disrupt the ability of the eavesdropper to eavesdrop. The artificial noise has no effect on legitimate user due to the use of null-space artificial noise in legitimate user. Based on this scheme, a closed expression, such as secure signal-to-interference and signal-to-noise ratio, an achievable secrecy rate and bit error rate are obtained, and the influences of the number of antennas, signal-to-noise ratio, and artificial noise are analyzed. The theoretical analysis and simulation results show that the proposed scheme has a higher secrecy signal-to-noise ratio, a higher rate of secrecy, and a lower bit error rate of the legitimate user than the the existing physical layer security schemes.
This paper presents physical layer security communication scheme for the wireless wire-tap channel. We investigate the feasibility of using the channel state information (CSI) as the key to encrypt the sending message. The inherent uncertainty and reciprocity of the time-variant wireless channel helps the sender to prevent the eavesdropper from getting any useful information without taking the risk of distribution of the key. The proposal results in perfect secrecy for some special signal. The secrecy capacity of the model is analyzed, we find out that the correlation between the legitimate channel and eavesdrop channel is very important for ensuring the secrecy of the transmission. The theoretical analysis and simulation result show that it is an efficient way for secure transmission based on ergodic fading wireless channel.