Abstrcat The modeling and design of output feedback control of quantum systems are studied. Firstly, the compatibility of Von Neumann measurement principle and continuous measurement is discussed. Then based on the continuous measurement and the existed quantum feedback control schemes, the general models of output feedback control of quantum systems are summarized. Finally, the linear direct output feedback control strategy is applied to suppress the amplitude decoherence in quantum computers. It is shown that good results can be obtained by optimally designed proportional coefficient of the linear output feedback control.
Abstrcat The modeling and design of output feedback control of quantum systems are studied. Firstly, the compatibility of Von Neumann measurement principle and continuous measurement is discussed. Then based on the continuous measurement and the existed quantum feedback control schemes, the general models of output feedback control of quantum systems are summarized. Finally, the linear direct output feedback control strategy is applied to suppress the amplitude decoherence in quantum computers. It is shown that good results can be obtained by optimally designed proportional coefficient of the linear output feedback control.
A general framework for applying feedback control to quantum control system under continuous measurement by a probe is discussed. The analysis is the standard bilinear interacting hamiltonian control form. A continuous measurement model based on an interacting quantum probe is used to control via feedback. It is also shown that concepts from systems theory could be applied with non-trivial modifications to analyze such feedback control systems undergoing decoherence. We also report new progress to the ongoing work on applications of feedback to control decoherence in open quantum systems.
Quantum engineering has seen rapid growth in the past two decades. Physicists, mathematicians and engineers have been working in unison to control a number of diverse systems in the quantum regime. Quantum control involving feedback has become particularly topical, as using information gained from a system can lead to more stable operation of a control protocol. Quantum feedback can be split into two paradigms: measurement based feedback and coherent feedback. Although it is increasingly evident that retaining the coherence of the feedback signal provides an intrinsic advantage over measurement-based feedback, coherent feedback is still a new paradigm. In particular, there are a limited number of options for coherently estimating a state within a feedback loop. As a step towards better understanding and implementation of quantum feedback, this thesis reports on modelling, estimation and control of quantum systems. The first topic is physical realisability of a variety of quantum systems, especially finite level systems and their outgrowths. Bilinear quantum stochastic differential equations (QSDEs) have to be employed to characterise these systems, which is a significant complement to the previous work on linear QSDEs. In light of the fact that direct and indirect couplings play a vital role in quantum network and control, we also provide state-space models for different classes of coupled open quantum systems incorporating both bidirectional and directional interactions. The second topic is coherent observers and optimal filtering. It is well established that classically estimation using the Kalman filter can provide improved performance over direct feedback schemes, and similar demonstrations have been performed for measurement-based quantum feedback. In this thesis I present coherent observers, including least mean squares estimators, which are driven by the coherent output of a specified quantum plant and designed such that some subset of the observer and plant's expectation values converge in the asymptotic limit. Not only can estimators "observe" mean quantities of quantum plant, but also they can "estimate" quantum correlations such as entanglement. This is of much importance to coherent feedback design in the absence of measurement steps without loss of fidelity. Last but not least, several topics regarding stabilisation and control design of quantum systems are discussed in my thesis. To be specific, tools for quantum stability analysis (e.g. Lyapunov conditions) are provided. Both measurement-based feedback and coherent feedback control design are taken into account. A measurement-based optimal controller for opto-mechanical systems aimed at synchronising different mechanical modes is presented, which is application-oriented. Moreover, A general observer-based coherent feedback control framework is studied, and I demonstrate a pole-placement approach via coherent observers that can be applied to various scenarios.
This paper provides a tutorial introduction to quantum feedback control. The paper begins with a discussion of various types of quantum control, and a summary of some relevant aspects of quantum mechanics. We then consider quantum filtering and measurement feedback optimal control for a two-level quantum system. Finally we discuss linear quantum systems, and two types of quantum LQG optimal control problems, one involving measurement, the other fully coherent. We conclude with some remarks about future research directions.
We present a formulation of feedback in quantum systems in which the best estimates of the dynamical variables are obtained continuously from the measurement record, and fed back to control the system. We apply this method to the problem of cooling and confining a single quantum degree of freedom, and compare it to current schemes in which the measurement signal is fed back directly in the manner usually considered in existing treatments of quantum feedback. Direct feedback may be combined with feedback by estimation, and the resulting combination, performed on a linear system, is closely analogous to classical linear-quadratic-Gaussian control theory with residual feedback.
Quantum control theory is profitably reexamined from the perspective of quantum information, two results on the role of quantum information technology in quantum feedback control are presented and two quantum feedback control schemes, teleportation-based distant quantum feedback control and quantum feedback control with quantum cloning, are proposed. In the first feedback scheme, the output from the quantum system to be controlled is fed back into the distant actuator via teleportation to alter the dynamics of system. The result theoretically shows that it can accomplish some tasks such as distant feedback quantum control that Markovian or Bayesian quantum feedback can not complete. In the second feedback strategy, the design of quantum feedback control algorithms is separated into a state recognition step, which gives "on-off" signal to the actuator through recognizing some copies from the cloning machine, and a feedback (control) step using another copies of cloning machine. A compromise between information acquisition and measurement disturbance is established, and this strategy can perform some quantum control tasks with coherent feedback.
Abstract Feedback control is an essential component of many modern technologies and provides a key capability for emergent quantum technologies. We extend existing approaches of direct feedback control in which the controller applies a function directly proportional to the output signal (P feedback), to strategies in which feedback determined by an integrated output signal (I feedback), and to strategies in which feedback consists of a combination of P and I terms. The latter quantum PI feedback constitutes the analog of the widely used proportional-integral feedback of classical control. All of these strategies are experimentally feasible and require no complex state estimation. We apply the resulting formalism to two canonical quantum feedback control problems, namely, generation of an entangled state of two remote qubits, and stabilization of a harmonic oscillator under thermal noise under conditions of arbitrary measurement efficiency. These two problems allow analysis of the relative benefits of P, I, and PI feedback control. We find that for the two-qubit remote entanglement generation the best strategy can be a combined PI strategy when the measurement efficiency is less than one. In contrast, for harmonic state stabilization we find that P feedback shows the best performance when actuation of both position and momentum feedback is possible, while when only actuation of position is available, I feedback consistently shows the best performance, although feedback delay is shown to improve the performance of a P strategy here.