According to the basic formula of the quantum phenomenon explanatory theory,with the aid of the distribution picture on still existence and pulsation,and the classical mechanics,using a simple means of mathematics,the energy levels formula of a particle in linear potential and its elastic collision with a rigid wall is deduced.
The work contains some of the elements of adequate quantum theory of impact phenomenon. These elements form the prelude to verification of the existent non-adequate theory of the impact phenomenon. At first a correct definition of impact has been formulated. For comparison, the interpretation of the elastic impact according to the existent knowledge is given. Then, taking advantage of the new correctly formulated the principle of mechanical energy conservation, the energetic states of impacting body have been described. Basing on this, the formula on dynamic deflection has been derived. This formula is adequate in character and fully corresponds with investigated reality.
Since the interest in the quantum phenomena started, there have been two main approaches to the quantum theory, the first approach investigates the motion of a wave-particle object by assuming the wave has the characteristics of a moving particle, momentum and energy, this approach was developed by physicists Max Planck, Albert Einstein, and others. The second approach investigates the motion of a particle-wave object by assuming the particle has the characteristics of a moving wave, wavelength, wave vector, and frequency, this approach was developed by physicists De Broglie, Schrodinger and others which led to the presence of quantum mechanics. This article focuses on the second approach and merging it with classical mechanics. An early mathematical formulation for the quantum theory was proposed by De Broglie’s relations and later on, another formulation was given by Schrodinger’s equation. A successful attempt to bridge the gap between classical mechanics with quantum theory implemented via a mathematical derivation for De Broglie’s relations and Schrodinger formulation, The derivation process overcame a main obstacle was the convergence of the deterministic nature of classical mechanics with the probabilistic nature of the quantum theory by adopting an innovative method based upon replacing constant values in a deterministic relation with probabilistic variables in the same relation, and this led to switch the relation from deterministic representation to probabilistic representation. Both classical and quantum explanation are given for the deduced formulas. An energy approach is instrumented. Since classical mechanics formulas are not sufficient to explain the quantum phenomena, a new concept of complementary energy introduced in order to connect the parameters of a moving particle with the parameters of an associated wave, the value of the complementary energy for each particle adjusted the total energy equation of N moving particles without changing the magnitude of the total energy of a system of N particles. In special cases, the value of the complementary energy for some particles equals the value of the total energy for the particles. The derivation process indicates that complementary energy corresponds to the potential energy on the surface of the material which prevents the particles to escape from the boundary of the matter to the outer space and maintains its coherence, complementary energy concept also manifest the impact of the moving particles on a single particle due to the energy conveyed during direct contact in case of collision or by the remote influence through an existing field in the space, so it represents an energy of dual nature for both matter and radiation wave combined. The complementary energy is not introduced as mathematical assumption in order to manipulate the total energy equation, it’s actually exists in the total energy equation and its validity has not been applied before. A general format for any potential energy is obtained regardless the nature of field it represents (a universal format for potential energy) that is by using mathematical manipulation for the equation of total energy of N moving particles. The derivation process led to a particle-wave formula. The substitution into the particle-wave formula with the speed of light, De Broglie’s relations, revealed. Some additional applications for the particle-wave formula are suggested, also as a well known energy quantization formula obtained by applying all of De Broglie’s relation, a general energy, and speed formulas resulting during the derivation process. Matching time independent equation called Schrodinger’s amplitude equation with classical mechanics formulation demonstrated by deducing both the wave function and the magnitude of the wave vector from the classical formulation after converting it to probabilistic formulation. A dedicated section for wave function solutions for Schrodinger’s time dependent equation was given in terms of the wave functions and the magnitude of the wave vectors obtained from the matching process of Schrodinger’s amplitude equation with classical mechanics.
This article is a continuation of Part(I) to demonstrate more aspects for a successful merge of classical mechanics to the quantum theory. The article starts first with the deduction of the general form of the complimentary energy, next a robust firm mathematical proof is given indicates that the complimentary energy has a wave nature and it is a potential energy, then the radiation condition has been determined, a vector formula expresses the corresponding force was deduced and this force was called adhesion force. A mathematical convergence process has proved the duality of the electromagnetic wave parameters and particle parameters, which results in the existence of a “wave-particle” object. While finding the relationship between the electromagnetic wave parameters and particle parameters, a mathematical relationship was found indicating that not every moving charged mass generates a magnetic field. This relationship for the mass was linked to the effective mass tensor, The geometric representation of the constant energy surface and its relationship to the energy levels of both the orbital model (Bohr model) and the cloud model for different geometric 3D shapes were investigated as a sample of the possible geometric interpretations of the energy equation, that is by employing the triangle method, it is possible to create a geometric representation of the constant energy surfaces. The relation between the energy levels, quantum numbers, and band width is represented geometrically. As a result of proving the relationship between the motion of an electromagnetic wave and the motion of a particle associated with the wave, two new, unprecedented mathematical formulas were developed. The first formula specifies a moving charged mass and its relationship to the resulting wavelength. Thus, the radius of the charged mass is obtained in terms of its wavelength and mass density. The second formula specifies the kinetic energy of a photon. The grand potentials are the potential energy of the Newton’s Law of Universal Gravitation, Coulomb’s Law, and Inverse Square Law of Electromagnetic Waves Intensity. From the potential energy of Newton’s law of universal gravitation, the wavelength of the gravitational wave, as well as the wavelength of quantum gravity were deduced. A mathematical relationship was then deduced that determines the lengths of the functions of conic sections, and in particular the length of perimeter of ellipses. From the potential energy of Coulomb’s law of attraction, a mathematical formulation of the energy levels in general for any atom of an element was obtained. This mathematical formulation was compared with the results obtained by Bohr and Schrödinger for the hydrogen atom. As for the inverse square law of electromagnetic radiation intensity, several innovative mathematical equations have been deduced that link different parameters together. Following the contents of this article requires to be quite familiar with the contents of the first part with the same title, as well as a complete understanding of the concepts of intermediate parameters derived and used in the various equations. Otherwise, it will be extremely difficult to follow the contents of this article.