Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Acta Physica Sinica

ELECTRON TRANSITION PROCESS OF MyM′1-yFClxBr1-x:Sm2+ AND SPECTRAL HOLE-BURNING EFFICIENCY

Hongwei Song, ZHANG JIA-HUA, ZHAO YU, Huang Shi-Hua, Jiaqi Yu, 中国科学院长春物理研究所激发态物理开放研究实验室

Published Jan 1, 1996• 0 citations
Publisher

Abstract

By measuring the excitation spectra of the 4f5d bands and the fluorescent decays of the 5DJ—7F0(J=2,1,0) transition probability depending on temperature in MyM′1-yFClxBr1-x:Sm2+(M=Mg,Ca,Sr,Ba)series, we have studied the dependence of the energy separation between the 4f5d bands and the 5DJ level, the 5DJ—7F0(J=2,1,0) transition probability on the composition grade(x) and (y) and the effect on hole-burning efficiency. We draw conclusions as below: In MyM′1-yFClxBr1-x:Sm2+ series, the 4f5d bands will be more close to the 5DJ level with the increase of the Br concentration and the concentration if snakk radium alkaline earth ion, and this situation makes the 5DJ—7F0 electron transition probability increase. By reasoning, the hole-burning efficiency of Sm2+ are expected to by enhanced.

DOI
10.7498/aps.45.1479

Related papers

Persistent spectral hole burning and optical properties of Sm2+doped into Mg0.5Sr0.5FCl0.5Br0.5mixed crystal

Kiwan Jang, Il-Gon Kim, Hyo-Jin Seo +3 more

We measured the temperature dependence of the fluorescence of Sm 2+ ions doped into a Mg 0.5 Sr 0.5 FCl 0.5 Br 0.5 mixed crystal and observed the persistent spectral hole burning at 90 K and 300 K. The electrons appearing at the 5 D 0 → 7 F 0 transition mostly come via the 4f5d→ 5 D 1 → 5 D 0 → 7 F 0 route but some of the electrons come directly from the 4f5d band. At 90 K, persistent spectral hole burning was achieved much more efficiently by the photon-gated spectral hole-burning process than by the one-photon hole-burning process, while the one-photon hole-burning process is much more efficient at 300 K.

Journal of Physics Condensed Matter•Mar 15, 2001•0 citations

Electron transition process of 5D2→7F0 of Sm2+ in spectral hole-burning

Hongwei Song, Jiahua Zhang, Shihua Huang +1 more

Materials of MyM’1-yFClxBr1-x:Sm2+ have been widely applied in spectral hole-burning since the first observation of persistent spectral hole-burning in BaFCl:Sm2+ at 2K was reported by A. Winnaker, etc. in 1985[1]. From then on, hole-burning in BaFCl0.5Br0.5:Sm2+ at 77K[2] in SrFCl and Mg0.5Sr0.5FCl0.5Br0.5:Sm2+ at room temperature[3, 4] were reported. Room temperature hole-buring of Sm2+ in fluorohafnate glasses[5,6] were reported in recent years also. These materials are of potential use in high temperature hole- burning. But comparing to organic materials, they have lower hole- burning efficiency and narrower inhomogenous line width. In order to apply spetral hole- buring in frequency domain optical storage, it is important to improve these materials.

Spectral Hole-Burning and Related Spectroscopies: Science and Applications•Jan 1, 1994•0 citations

The Study on Spectral Hole Burning Rate in BaFCl0.5Br0.5: Sm2+

Jiahua Zhang, Hongwei Song, Yu Zhao +4 more

In Sm2+ doped alkline earth halides, hole burning process is two step photoionization of Sm2+ following electron trapping [1]. The first step is using burning laser to excite electron of Sm2+ from the ground state 7F0 to the excited energy level 5DJ. The second step is using gating laser to excite the electron from the 5DJ level to the conduction band, where the free electron will be captured either by trap or by the ionized Sm2+ ion again. The overall process depends on the factors: excitation rate, the trapping rate and the recombination rate.

Spectral Hole-Burning and Related Spectroscopies: Science and Applications•Jan 1, 1994•0 citations

Trap Effect in Spctral Hole Burning of Sm2+ Doped Crystals

Jiahua Zhang, Ling‐Dong Sun, Weiping Qin +2 more

Since the first observation of persistent photon gated spectral hole burning in BaFCl:Sm2+ at liquid helium temperature[1], the successful improvement on this material has been performed in our laboratory by adding bromine and alkline earth metals in the melt to form MyM'1-yFClxBr1-x:Sm (M,M'=Mg, Ca, Sr, Ba; x,y=0-1) system, in which the inhomogeneous line is broadened significantly[2-5] and room temperature hole burning is realized [6]. The hole burning mechanism is found to be photoionization of Sm2+ followed by electron trapping[1]. A kind of principal electron trap is considered to be Sm3+[1], which brings about hole refilling in the holes burnt formerly as burning the next hole because the generated Sm3+ corresponding to the former holes can trap electrons again released in the next hole burning[7]. That means, writing will erase the stored information. To avoiding this effect, introducing an other kind of trap different from Sm3+ for hole burning is necessary In the present paper, we report the results of hole burning in Sm singly doped and Sm, Yb doubly doped SrFCl crystals at 77K and room temperature. Two different trap effects in hole burning are observed and discussed.

Spectral Hole-Burning and Related Spectroscopies: Science and Applications•Jan 1, 1992•0 citations

The transition probability of 5DJ-7F0 and hole-burning quantum efficiency in the SryBa1−yFCl0.5Br0.5:Sm2+ system

Hongwei Song, Jiahua Zhang, Diankun Gao +2 more

Optics Communications•Nov 1, 1995•3 citations

Spectral hole burning quantum efficiency and electron traps in Sm2+ -ion-doped aluminosilicate glasses

Hongwei Song, Tomokatsu Hayakawa, Masayuki Nogami

Persistent spectral hole burning (PSHB) in the ${}^{7}{F}_{0}{\ensuremath{-}}^{5}{D}_{0}$ transition and the electron excitation in the ${}^{7}{F}_{0}\ensuremath{-}4f5d$ transition of ${\mathrm{Sm}}^{2+}$ doped in ${\mathrm{Al}}_{2}{\mathrm{O}}_{3}{\ensuremath{-}\mathrm{S}\mathrm{i}\mathrm{O}}_{2}$ glasses were studied from the measurements of hole burning efficiency and the refilling of the burnt hole. The PSHB at low temperature is attributed to the optically activated rearrangement of OH bonds surrounding ${\mathrm{Sm}}^{2+}$ ions. On the other hand, the PSHB at high temperature is attributed to one-step electron tunneling in the excitation state. The barrier heights for hole filling corresponding to the two mechanisms were determined to be \ensuremath{\sim}0.27 and \ensuremath{\sim}0.90 eV, respectively. Thermal depth of the trap that captures electrons by two-step ionization via the $4f5d$ state was determined to be \ensuremath{\sim}0.35 eV below the conduction band. A model was proposed for describing the PSHB and electron excitation of ${\mathrm{Sm}}^{2+}$ doped in ${\mathrm{Al}}_{2}{\mathrm{O}}_{3}{\ensuremath{-}\mathrm{S}\mathrm{i}\mathrm{O}}_{2}$ glasses. In addition, the dependence of hole burning efficiency on the ${\mathrm{Al}}_{2}{\mathrm{O}}_{3}$ concentration, temperature, and burning wavelength was also studied.

Physical review. B, Condensed matter•May 1, 1999•15 citations
By measuring the excitation spectra of the 4f5d bands and the fluorescent decays of the 5DJ—7F0(J=2,1,0) transition probability depending on temperature in MyM′1-yFClxBr1-x:Sm2+(M=Mg,Ca,Sr,Ba)series, we have studied the dependence of the energy separation between the 4f5d bands and the 5DJ level, the 5DJ—7F0(J=2,1,0) transition probability on the composition grade(x) and (y) and the effect on hole-burning efficiency. We draw conclusions as below: In MyM′1-yFClxBr1-x:Sm2+ series, the 4f5d bands will be more close to the 5DJ level with the increase of the Br concentration and the concentration if snakk radium alkaline earth ion, and this situation makes the 5DJ—7F0 electron transition probability increase. By reasoning, the hole-burning efficiency of Sm2+ are expected to by enhanced.
We measured the temperature dependence of the fluorescence of Sm 2+ ions doped into a Mg 0.5 Sr 0.5 FCl 0.5 Br 0.5 mixed crystal and observed the persistent spectral hole burning at 90 K and 300 K. The electrons appearing at the 5 D 0 → 7 F 0 transition mostly come via the 4f5d→ 5 D 1 → 5 D 0 → 7 F 0 route but some of the electrons come directly from the 4f5d band. At 90 K, persistent spectral hole burning was achieved much more efficiently by the photon-gated spectral hole-burning process than by the one-photon hole-burning process, while the one-photon hole-burning process is much more efficient at 300 K.
Materials of MyM’1-yFClxBr1-x:Sm2+ have been widely applied in spectral hole-burning since the first observation of persistent spectral hole-burning in BaFCl:Sm2+ at 2K was reported by A. Winnaker, etc. in 1985[1]. From then on, hole-burning in BaFCl0.5Br0.5:Sm2+ at 77K[2] in SrFCl and Mg0.5Sr0.5FCl0.5Br0.5:Sm2+ at room temperature[3, 4] were reported. Room temperature hole-buring of Sm2+ in fluorohafnate glasses[5,6] were reported in recent years also. These materials are of potential use in high temperature hole- burning. But comparing to organic materials, they have lower hole- burning efficiency and narrower inhomogenous line width. In order to apply spetral hole- buring in frequency domain optical storage, it is important to improve these materials.
In Sm2+ doped alkline earth halides, hole burning process is two step photoionization of Sm2+ following electron trapping [1]. The first step is using burning laser to excite electron of Sm2+ from the ground state 7F0 to the excited energy level 5DJ. The second step is using gating laser to excite the electron from the 5DJ level to the conduction band, where the free electron will be captured either by trap or by the ionized Sm2+ ion again. The overall process depends on the factors: excitation rate, the trapping rate and the recombination rate.
Since the first observation of persistent photon gated spectral hole burning in BaFCl:Sm2+ at liquid helium temperature[1], the successful improvement on this material has been performed in our laboratory by adding bromine and alkline earth metals in the melt to form MyM'1-yFClxBr1-x:Sm (M,M'=Mg, Ca, Sr, Ba; x,y=0-1) system, in which the inhomogeneous line is broadened significantly[2-5] and room temperature hole burning is realized [6]. The hole burning mechanism is found to be photoionization of Sm2+ followed by electron trapping[1]. A kind of principal electron trap is considered to be Sm3+[1], which brings about hole refilling in the holes burnt formerly as burning the next hole because the generated Sm3+ corresponding to the former holes can trap electrons again released in the next hole burning[7]. That means, writing will erase the stored information. To avoiding this effect, introducing an other kind of trap different from Sm3+ for hole burning is necessary In the present paper, we report the results of hole burning in Sm singly doped and Sm, Yb doubly doped SrFCl crystals at 77K and room temperature. Two different trap effects in hole burning are observed and discussed.
Persistent spectral hole burning (PSHB) in the ${}^{7}{F}_{0}{\ensuremath{-}}^{5}{D}_{0}$ transition and the electron excitation in the ${}^{7}{F}_{0}\ensuremath{-}4f5d$ transition of Sm2+{\mathrm{Sm}}^{2+}Sm2+ doped in ${\mathrm{Al}}_{2}{\mathrm{O}}_{3}{\ensuremath{-}\mathrm{S}\mathrm{i}\mathrm{O}}_{2}$ glasses were studied from the measurements of hole burning efficiency and the refilling of the burnt hole. The PSHB at low temperature is attributed to the optically activated rearrangement of OH bonds surrounding Sm2+{\mathrm{Sm}}^{2+}Sm2+ ions. On the other hand, the PSHB at high temperature is attributed to one-step electron tunneling in the excitation state. The barrier heights for hole filling corresponding to the two mechanisms were determined to be \ensuremath{\sim}0.27 and \ensuremath{\sim}0.90 eV, respectively. Thermal depth of the trap that captures electrons by two-step ionization via the 4f5d4f5d4f5d state was determined to be \ensuremath{\sim}0.35 eV below the conduction band. A model was proposed for describing the PSHB and electron excitation of Sm2+{\mathrm{Sm}}^{2+}Sm2+ doped in ${\mathrm{Al}}_{2}{\mathrm{O}}_{3}{\ensuremath{-}\mathrm{S}\mathrm{i}\mathrm{O}}_{2}$ glasses. In addition, the dependence of hole burning efficiency on the Al2O3{\mathrm{Al}}_{2}{\mathrm{O}}_{3}Al2​O3​ concentration, temperature, and burning wavelength was also studied.