Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Nature Communications

A modular design of molecular qubits to implement universal quantum gates

Jesús Ferrando–Soria, Eufemio Moreno Pineda, Alessandro Chiesa, Antonio Fernández, Samantha A. Magee, Stefano Carretta, Paolo Maria Santini, Íñigo J. Vitórica‐Yrezábal, Floriana Tuna, Grigore A. Timco, Eric J. L. McInnes, Richard E. P. Winpenny

Published Apr 25, 2016• 254 citations
Publisher

Abstract

The physical implementation of quantum information processing relies on individual modules-qubits-and operations that modify such modules either individually or in groups-quantum gates. Two examples of gates that entangle pairs of qubits are the controlled NOT-gate (CNOT) gate, which flips the state of one qubit depending on the state of another, and the gate that brings a two-qubit product state into a superposition involving partially swapping the qubit states. Here we show that through supramolecular chemistry a single simple module, molecular {Cr7Ni} rings, which act as the qubits, can be assembled into structures suitable for either the CNOT or gate by choice of linker, and we characterize these structures by electron spin resonance spectroscopy. We introduce two schemes for implementing such gates with these supramolecular assemblies and perform detailed simulations, based on the measured parameters including decoherence, to demonstrate how the gates would operate.

DOI
10.1038/ncomms11377

Related papers

Molecular nanomagnets with switchable coupling for quantum simulation

Alessandro Chiesa, George F. S. Whitehead, Stefano Carretta +7 more

Molecular nanomagnets are attractive candidate qubits because of their wide inter- and intra-molecular tunability. Uniform magnetic pulses could be exploited to implement one- and two-qubit gates in presence of a properly engineered pattern of interactions, but the synthesis of suitable and potentially scalable supramolecular complexes has proven a very hard task. Indeed, no quantum algorithms have ever been implemented, not even a proof-of-principle two-qubit gate. Here we show that the magnetic couplings in two supramolecular {Cr7Ni}-Ni-{Cr7Ni} assemblies can be chemically engineered to fit the above requisites for conditional gates with no need of local control. Microscopic parameters are determined by a recently developed many-body ab-initio approach and used to simulate quantum gates. We find that these systems are optimal for proof-of-principle two-qubit experiments and can be exploited as building blocks of scalable architectures for quantum simulation.

Scientific Reports•Dec 11, 2014•74 citations

Switchable Interaction in Molecular Double Qubits

Jesús Ferrando–Soria, Samantha A. Magee, Alessandro Chiesa +11 more

Quantum information processing (QIP) could revolutionize how we simulate and understand quantum systems. Any QIP scheme requires both individual units (qubits) that have long phase memories and switchable units that can be placed between the qubits. Here, we describe supramolecular systems where {Cr 7 Ni} rings are used as qubits, linked by redox-switchable {Ru 2 M} oxo-centered triangles (M = Zn, Ni, or Co). The supramolecular assemblies have been structurally characterized and involve two {Cr 7 Ni} rings bound to {Ru 2 M} triangles through iso -nicotinate ligands. Detailed physical studies, including electrochemistry and electron paramagnetic resonance spectroscopy, show that when M = Co, the supramolecular assembly has the physical characteristics needed to implement the √iSWAP gate, which is an important entangling two-qubit gate. Detailed simulations show that the fidelity of this gate is potentially very high and depends on the phase memory time of the {Cr 7 Ni} qubits but not the {Ru 2 Co} switch.

Chem•Nov 1, 2016•77 citations

A Quantum Computation Model for Molecular Nanomagnets

Giovanni Amedeo Cirillo, Giovanna Turvani, Mariagrazia Graziano

Molecular nanomagnets can be considered as serious candidates for the definition of a scalable and reliable quantum computing technology: information is encoded on their spins and they ensure relaxation and decoherence times sufficiently long for the execution of tens of quantum operations. Among these devices, Cr7Ni supramolecular complexes are extremely of interest since they implement a universal set of quantum gates, made of single-qubit gates and the two-qubit Controlled-phase gate. A model for analyzing Cr7Ni molecules and a potential quantum computer architecture are proposed: starting from the energy parameters required for spin manipulations, these systems have been proved to implement elementary quantum algorithms. Within this paper, two, three and four-qubit systems have been analyzed: the simulation of quantum operations and the analysis of dynamical non-idealities have been done in parallel. Our approach enables the definition of an operating point - in terms of magnetic driving fields and latency - in which the execution of elementary quantum algorithms is characterized by negligible errors. The proposed model has been entirely implemented in MATLAB, thus obtaining a software infrastructure for the analysis of Cr7Ni molecules that can be extended to quantum systems with analogous Hamiltonian and behavior.

IEEE Transactions on Nanotechnology•Jan 1, 2019•13 citations

Supramolecular Complexes for Quantum Simulation

Alessandro Chiesa, Paolo Maria Santini, Stefano Carretta

Simulating the evolution of quantum systems on a classical computer is a yellow very challenging task, which could be easily tackled by digital quantum simulators. These are intrinsically quantum devices whose parameters can be controlled in order to mimic the evolution of a broad class of target Hamiltonians. We describe here a quantum simulator implemented on a linear register of molecular Cr7Ni qubits, linked through Co2+ ions which act as switches of the qubit–qubit interaction. This allows us to implement one- and two-qubit gates on the chain with high-fidelity, by means of uniform magnetic pulses. We demonstrate the effectiveness of the scheme by numerical experiments in which we combine several of these elementary gates to implement the simulation of the transverse field Ising model on a set of three qubits. The very good agreement with the expected evolution suggests that the proposed architecture can be scaled to several qubits.

Magnetochemistry•Oct 1, 2016•13 citations

Remote controlled-NOT gate of d-dimension

Gui-Fang Dang, Heng Fan

Single qubit rotation gate and the controlled-NOT (CNOT) gate constitute a complete set of gates for universal quantum computation. In general the CNOT gate are only for two nearby qubits. For two qubits which are remote from each other, we need a series of swap gates to transfer these two qubits to the nearest neighboring sites, and then after the CNOT gate we should transfer them to their original sites again. However, a series of swap gates are resource for quantum information processing. One economy way which does not consume so much resource is to implement CNOT gate remotely. The remote CNOT gate is to implement the CNOT gate for two remotely separated qubits with the help of one additional maximally entangled state. The original remote CNOT gate is for two qubits, here we will present the d-dimensional remote CNOT gate. The role of quantum teleportation is identified in the process of the remote CNOT gate.

arXiv:0711.3714•Nov 23, 2007•6 citations

Quantum-state preparation with universal gate decompositions

Martin Plesch, Časlav Brukner

In quantum computation every unitary operation can be decomposed into quantum circuits---a series of single-qubit rotations and a single type entangling two-qubit gates, such as controlled-not(cnot) gates. Two measures are important when judging the complexity of the circuit: the total number of cnot gates needed to implement it and the depth of the circuit, measured by the minimal number of computation steps needed to perform it. Here we give an explicit and simple quantum circuit scheme for preparation of arbitrary quantum states, which can directly utilize any decomposition scheme for arbitrary full quantum gates, thus connecting the two problems. Our circuit reduces the depth of the best currently known circuit by a factor of $2$. It also reduces the total number of cnot gates from ${2}^{n}$ to $\frac{23}{24}{2}^{n}$ in the leading order for even number of qubits. Specifically, the scheme allows us to decrease the upper bound from $11$ cnot gates to $9$ and the depth from $11$ to $5$ steps for four qubits. Our results are expected to help in designing and building small-scale quantum circuits using present technologies.

arXiv:1003.5760•Physical Review A•Mar 3, 2011•387 citations
The physical implementation of quantum information processing relies on individual modules-qubits-and operations that modify such modules either individually or in groups-quantum gates. Two examples of gates that entangle pairs of qubits are the controlled NOT-gate (CNOT) gate, which flips the state of one qubit depending on the state of another, and the gate that brings a two-qubit product state into a superposition involving partially swapping the qubit states. Here we show that through supramolecular chemistry a single simple module, molecular {Cr7Ni} rings, which act as the qubits, can be assembled into structures suitable for either the CNOT or gate by choice of linker, and we characterize these structures by electron spin resonance spectroscopy. We introduce two schemes for implementing such gates with these supramolecular assemblies and perform detailed simulations, based on the measured parameters including decoherence, to demonstrate how the gates would operate.
Molecular nanomagnets are attractive candidate qubits because of their wide inter- and intra-molecular tunability. Uniform magnetic pulses could be exploited to implement one- and two-qubit gates in presence of a properly engineered pattern of interactions, but the synthesis of suitable and potentially scalable supramolecular complexes has proven a very hard task. Indeed, no quantum algorithms have ever been implemented, not even a proof-of-principle two-qubit gate. Here we show that the magnetic couplings in two supramolecular {Cr7Ni}-Ni-{Cr7Ni} assemblies can be chemically engineered to fit the above requisites for conditional gates with no need of local control. Microscopic parameters are determined by a recently developed many-body ab-initio approach and used to simulate quantum gates. We find that these systems are optimal for proof-of-principle two-qubit experiments and can be exploited as building blocks of scalable architectures for quantum simulation.
Quantum information processing (QIP) could revolutionize how we simulate and understand quantum systems. Any QIP scheme requires both individual units (qubits) that have long phase memories and switchable units that can be placed between the qubits. Here, we describe supramolecular systems where {Cr 7 Ni} rings are used as qubits, linked by redox-switchable {Ru 2 M} oxo-centered triangles (M = Zn, Ni, or Co). The supramolecular assemblies have been structurally characterized and involve two {Cr 7 Ni} rings bound to {Ru 2 M} triangles through iso -nicotinate ligands. Detailed physical studies, including electrochemistry and electron paramagnetic resonance spectroscopy, show that when M = Co, the supramolecular assembly has the physical characteristics needed to implement the √iSWAP gate, which is an important entangling two-qubit gate. Detailed simulations show that the fidelity of this gate is potentially very high and depends on the phase memory time of the {Cr 7 Ni} qubits but not the {Ru 2 Co} switch.
Molecular nanomagnets can be considered as serious candidates for the definition of a scalable and reliable quantum computing technology: information is encoded on their spins and they ensure relaxation and decoherence times sufficiently long for the execution of tens of quantum operations. Among these devices, Cr7Ni supramolecular complexes are extremely of interest since they implement a universal set of quantum gates, made of single-qubit gates and the two-qubit Controlled-phase gate. A model for analyzing Cr7Ni molecules and a potential quantum computer architecture are proposed: starting from the energy parameters required for spin manipulations, these systems have been proved to implement elementary quantum algorithms. Within this paper, two, three and four-qubit systems have been analyzed: the simulation of quantum operations and the analysis of dynamical non-idealities have been done in parallel. Our approach enables the definition of an operating point - in terms of magnetic driving fields and latency - in which the execution of elementary quantum algorithms is characterized by negligible errors. The proposed model has been entirely implemented in MATLAB, thus obtaining a software infrastructure for the analysis of Cr7Ni molecules that can be extended to quantum systems with analogous Hamiltonian and behavior.
Simulating the evolution of quantum systems on a classical computer is a yellow very challenging task, which could be easily tackled by digital quantum simulators. These are intrinsically quantum devices whose parameters can be controlled in order to mimic the evolution of a broad class of target Hamiltonians. We describe here a quantum simulator implemented on a linear register of molecular Cr7Ni qubits, linked through Co2+ ions which act as switches of the qubit–qubit interaction. This allows us to implement one- and two-qubit gates on the chain with high-fidelity, by means of uniform magnetic pulses. We demonstrate the effectiveness of the scheme by numerical experiments in which we combine several of these elementary gates to implement the simulation of the transverse field Ising model on a set of three qubits. The very good agreement with the expected evolution suggests that the proposed architecture can be scaled to several qubits.
Single qubit rotation gate and the controlled-NOT (CNOT) gate constitute a complete set of gates for universal quantum computation. In general the CNOT gate are only for two nearby qubits. For two qubits which are remote from each other, we need a series of swap gates to transfer these two qubits to the nearest neighboring sites, and then after the CNOT gate we should transfer them to their original sites again. However, a series of swap gates are resource for quantum information processing. One economy way which does not consume so much resource is to implement CNOT gate remotely. The remote CNOT gate is to implement the CNOT gate for two remotely separated qubits with the help of one additional maximally entangled state. The original remote CNOT gate is for two qubits, here we will present the d-dimensional remote CNOT gate. The role of quantum teleportation is identified in the process of the remote CNOT gate.
In quantum computation every unitary operation can be decomposed into quantum circuits---a series of single-qubit rotations and a single type entangling two-qubit gates, such as controlled-not(cnot) gates. Two measures are important when judging the complexity of the circuit: the total number of cnot gates needed to implement it and the depth of the circuit, measured by the minimal number of computation steps needed to perform it. Here we give an explicit and simple quantum circuit scheme for preparation of arbitrary quantum states, which can directly utilize any decomposition scheme for arbitrary full quantum gates, thus connecting the two problems. Our circuit reduces the depth of the best currently known circuit by a factor of 222. It also reduces the total number of cnot gates from 2n{2}^{n}2n to 23242n\frac{23}{24}{2}^{n}2423​2n in the leading order for even number of qubits. Specifically, the scheme allows us to decrease the upper bound from 111111 cnot gates to 999 and the depth from 111111 to 555 steps for four qubits. Our results are expected to help in designing and building small-scale quantum circuits using present technologies.